3d DiskDJ Split Audio Lead Construction ( part 2 )

In this Video ,I show you how to make a slpit Audio lead ,so you can use DiscDj with a Mixer and mix from deck 1 to deck 2 using a Mixer and cueing using head phones, in Part 3 I will show you how well this app works with full mix using a power amp.
If you enjoy this video please leave a thumbs up and any comments or questions you may have.
Please subscribe to my channel for more videos and click on the Bell to be notified of new videos uploaded
Thanks For Watching.

[@bunnysuperville]

Thank you for this video

[@videomentaryproductionschannel]

Your welcome, anything I can do to help

[@bunnysuperville]

@@videomentaryproductionschannel would two pairs of 2 RCA Male to 3.5mm stereo headphone jack. Then connect those headphone jacks to adaptor that can take the 2 jacks to 1 jack? It sounds confusing

[@videomentaryproductionschannel]

Ok, what you do is get your mixer it has to deck inputs each deck has a left and a right channel for stereo, to make your cable work from a tablet, with headphones out socket which is a mini jack socket, you will need, two sets of RCA plugs male ok on each set, at one end there should a Red and a Black, RCA male plug on the other end of each set just stripped wires, on one of the sets you have Red wire and white wire, white= left ,Red= Right, in normal stereo, but to make them into mono, you need to put Red & White together and solder them, and the screen from both put those together and solder , now do the same to the other set , when there both done up to that point, get your mini jack plug, open it up, you will see two tabs one is left one is right channel , ok now get set one of your RCA leads with the ends that you soldered and get the Red white wires and solder them to eather one of those small tags on the mini jack plug, and do the same with the other set, solder on to the other tag, now get both screen wires from both sets and solder them to the earth tag on the mini jack plug, before you do any soldering, don't forget to put the cover from the mini jack on the cable first hope this helps, best regards Barry

[@bunnysuperville]

@@videomentaryproductionschannel noted, will do, thank you for your assistance

[@djking7360]

I need this cable