Thanks for these tips, when I bought my first DA polisher last month and it really didn't do anything. It wasn't until I learned the included pads where NOT intended for cutting/compounding that I bought better pads. I was under the impression the compound mattered most so I bought Meguairs UC, still the "better" pads where all right they did some but I wasn't satisfied with my time spent getting little results removing light oxidation/water spots. I could spend 10 mins working a section and it was hardly noticeable compared to the area I hadn't worked on my Honda's paint. I bought this pad and it has made the process 4-5x's fast I actually feel like I'm accomplishing something with my time now, and that the money and hours spent previously where not wasted.
I just used this pad with Koch Chemie M302 on a white Subaru Forester, and wow. Your right. Huge improvement. Important note: keep the pad clean, and switch to new pad occasionally.
These pads are excellent for paint correction. I used these with Jescar compound on a 15 year old car and the finish I achieved was phenomenal. You could probably use this with 3D One and still get great results.
Absolutely! 3D One on a 50/50 pad Stellar results on a black Toyota 4Runner. I have a bad habit of using too much polish. Had to really clean up the pad between passes.
@@craig.encinitas Do they make Uro fiber pads geared more for cutting? I believe I've seen ones meant for polishing and the 50/50 pads but not ones geared for more cutting...not that I think it matters because if those 50/50 pads and high quality correction cream can't do, nothing can.
I love how informative and useful Brian’s videos are! With all my tinkering of different things, I should bring my car to Apex to fix it the right way! 😂
Huge part of my arsenal with 3D1. I keep a lot of other combinations I’ve seen you work with. Like a golf bag, sometimes you a driver or a putter and all the woods and irons in between. I’m hooked on Sonax perfect finish and now the Angelwax line., Perfect polish has a place with the right customer too.
Amazing pads.. I heard about them on one of your videos and I bought to try and I was super impressed.. If I have a car with light scratches I use this pad with sonax cut and finish and it works amazing.. If car is bad shape I go with cut max and then second step perfect finish and some of polishing Lake Country pad... Thanks again sir.. You are the best...
Ditto! I have the Maxshine M15 and both of the Buff and Shine Euro Fiber two Combo Pads (Cut and Polish) + the 3D One. Absolutely love them! All thanks to Apex Detail recommends.
@@tundrawhisperer4821 Check out their website and videos on the full line. There is the 50/50 black/white color blend pad and then a complimenting black color only polish pad. I didn't realize it was available either until I saw a combo box called the Buff and Shine Reflection Artist. I have not expensed for the box set but did buy 2 of each microfiber pad so I can clean and dry one between panels. Great results on my latest C6 Centennial Corvette. Both are so very simple to use.
Brian, your method has been adopted by myself and have taught it to my shop and staff. I absolutely can't thank you enough for this. It has improved our turn around times, improved customer satisfaction ratings, and lowered our operation cost. HUGE THANK YOU FOR THE INFORMATION YOU SHARE
Just tried this pad using G9, worked great with Sonax 04 06 on troubled areas of my 06 Pontiac Vibe.Protected with TW hybrid ceramic, very pleased. Glad to hear you're planning on bringing Mail Call back. Hats off Sir.
Thanks Brian. So glad I invested in these pads. Working on a very neglected black work van today with "ghosting" from vinyl decals. 😣 Gonna give Meguiar's Ultimate Compound a go. Lot of real estate to cover but super flat panels!! 👍
Polishing...cutting...and finishing.... Probably for me the area where I feel most exposed and most confused.. So many polish and compound options...so many pad types and manufacturers. Do I experiment or do I stick with one brand and become proficient. Even more complex given as a weekend warrior I'm not polishing on a daily basis. Then you throw in the different paint types the different clear coats and the level of correction needed from swirls to scratches. So thanks for a little more information to help in deciding what's the best path to take
-3D One, Urofiber 50/50 pad. -Hex Logic White polish pad. -TACsystem Total One Essential primer polish -TACsystem One Step Master White Ford Edge came out gleaming! The finish came out so reflective and blindingly glossy in the afternoon sun. 💫 ☀️ 😎
Yes!! This is the video I needed today. A vendor just gave me one of the Uro Fiber pads for free (part#592MFP). I can't wait to go use it. I've only ever used lake country foam pads before for paint correction.
Great video Brian, it was your first video review on these pads that made me go out and purchase them. Have used them many times since then and absolutely love using them in one step scenarios. I just want to say thanks as always and hope you have a great Fathers Day weekend.
Thank you so much for your input and explanation of products, with chemicals and pads! I really enjoy watching your videos and have learned a lot and got better in detailing because of you
just had my first go with urofiber using ex0406[sonax perfect finish DA version] with a makita forced rotation polisher. I'm a literal first timer and I'd just been using a basic foam pad and the difference was remarkable, taking out about 25% more surface scratches and even diminishing medium/deepest scratches. With the forced rotary the microfiber grabs and isn't as smooth as the foam but its worth the trade off with results. The pads are machine washable as well, but I think I'll hand wash
That’s what I’m talking about loving it I just purchased the 3D one and I purchase few different pads and special the urofiber I have a black 2015 just want took things up had some dogs and cats jump on it and they not even my pets but anyway love your work I will try this out as soon as I can thanks again
u had all ur apex detailing family at HELLO!!great video and awesome tutorial video again buddy. after almost 4 years of being a true subscriber I can finish ur voice over sentences. lol.im sure I speak for every1 in the family that we r better informed,detailer,etc from ur videos,texts,emails,etc .once again thank you so very much. most people don't realize how difficult to make videos,respond back 2 us and let's not 4get running a successful detailing shop.b well stay safe and hydrated good friend
Thanks Brian! Great examples for getting results. Haven't been able to get hold of the EuroFiber pads yet, only 1 supplier here in Australia. Can't wait to try them though as they look the goods. Cheers mate 👍
Excellent video! Answered a bunch of questions I've had wrt the urofiber pads. I am a enthusiast, thanks in large part to your channel, and am toying with the idea of getting a more serious polisher. I have a torq 10fx and... yea, it takes forever to do correction on paint.
Could you recommend or do a video on how to clean/protect German cabriolet hoods on their vehicles such as Audi/Mercedes. This area seems very difficult to get clear successful information on in how to approach and what to use. Just an idea. Thanks 👍
How well does this pad work with sonax cutmax and sonax perfect finish? I'm doing my new 2021 dodge ram rebel next weekend and those are what I will be using. Great video and keep it up, thanks!
Amazing amount of info in this video! You're fantastic at sharing your expertise! How many of these pads do you use for an entire car while blowing them out? Also, how can I tell how hard or soft the clear coat is when working on a particular vehicle? Thanks!
Just used these on my black f150 a few weeks ago for the first time. I found they clog up really quick was my only complaint. I just did a 1 step with 3D one. If I was being really picky there were a few spots where I could have gone over with a polishing pad but for the most part fantastic results with just a torque 10fx da polisher. What do you use to clean them when you are done with job? I blew them out but should I just clean them like I would a microfiber pad?
Great video ...one question i noticed you use d.a polisher more over the rotary do you prefer the d.a more now? I know you said in the past the rotary is superior
Hey B, thank you for these videos you give out so much knowledge. I have a question, on a previous video you mentioned if a customer was in the budget for a multi step and a 2 step. Is a multi step considered a sub 1 correction where you would use a finishing pad after using a euro fiber yet using the same one step polish? Thanks in advance B!
On a Japanese car, mazda 46v soul red that’s a tri coat or tinted clear coat, super soft but gorgeous, would you have any suggestions on correcting a lighty swirled up clear? It seems to haze easily, I needed to jewel my test spot on a slow rotary to clear the haze. Thought Id do some research before continuing. Tool is a 15mm DA, the shinemate you recommended. Any suggestions on pad and compounds? Thanks
Hey man, love your videos. Im just about to.use the uro pad with 3d one to do a single stage... How long does a single 2x2 pass take ( what rate are you moving the polisher) you say a rate of 1"/sec? That seems really slow? How many passes do you do per 2x2?
Brian, what would you think about using the uro-fiber pads with Sonax CutMax and Perfect Finish on new black VW paint? I was also considering investing in a bottle of the Rupes Uno Protect. I have an 8mm Das-6 V2 DA by the way.
I know this is an old post about these uro fiber pads but I hope you respond. How do you clean them as you go panel to panel? I find it gets matted down maybe becoming less effective. I’ve tried air and pad washer. Thanks In advance
Currently polishing my f type and uro fiber with polish angel master compound is doing a perfect job removing all marring with no haze, and my 2 year old zipang coating, almost good enough to one step. I’ve found some compounds don’t work well with the uro, jescar compound for eg leaves a lot of haze but on a lake country mf cutting pad it doesn’t
Do you clean the pads before the 1st use? I've been meaning to pull the trigger on these Urofiber pads for a few weeks now and I think this video has pushed me over the edge.
Complete newbie here. Is it okay to follow up the Turtle Wax sio2 polish and wax with another polish? Or possibly even Carbonite 845? My plan would be to switch from a urofiber to a finishing foam pad. I didn't know if building the two on top of each other would be bad or if it just is completely unnecessary. Thanks in advance for any help!
Brian, great video. I use these pads often but find they are difficult to get into smaller areas as they are thin and not flexible on the backing plate. Sometimes I will switch over to an orange foam pad, but the cut isn't as good (- It might be good if the pads were a little thicker and more flexible for rounder body panels. Your thoughts?
Hey guys just a quick question. I tried these pads on my rotary buffer and they don't do so well compared to firm foam pads from 3D or rupes these Euro microfibers are total garbage so my question is are these ment to be used with da only or is there a way to use them efficiently with rotary as well thank you
Hey Brian, i love your vids and value ur opinion....i currently use the harbor freight da polisher as most newbees like myself do but ive done a few corrections and feel the need to get a better polisher, possibly a 15” throw. Any suggestions for me would be greatly appreciated! Thanks as always for the great content
Question for anybody that maintains these pads. I used a small bit of tide cold water and diluted it heavily with water to clean out the pads after a correction. I know microfiber doesn't like those detergents that have dyes and perfumes added. Are my pads going to be effective after that? I guess I could wash them again using IPA, Dawn and APC this time. Anybody know if I'm just overthinking it? Will I still get the same performance after I do the second clean? Thanks
Hi i am planning to use Urofiber with 3D One as my compound stage 1. I was just wanting how many pads do i require with 3D one for 1 car? do i need multiple?
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
Thanks for these tips, when I bought my first DA polisher last month and it really didn't do anything. It wasn't until I learned the included pads where NOT intended for cutting/compounding that I bought better pads. I was under the impression the compound mattered most so I bought Meguairs UC, still the "better" pads where all right they did some but I wasn't satisfied with my time spent getting little results removing light oxidation/water spots. I could spend 10 mins working a section and it was hardly noticeable compared to the area I hadn't worked on my Honda's paint.
I bought this pad and it has made the process 4-5x's fast I actually feel like I'm accomplishing something with my time now, and that the money and hours spent previously where not wasted.
I just used this pad with Koch Chemie M302 on a white Subaru Forester, and wow. Your right. Huge improvement. Important note: keep the pad clean, and switch to new pad occasionally.
Your enthusiasm is contagious. Your detailing/polishing wisdom is worthy of a PH. D. Cheers have a great weekend
These pads are excellent for paint correction. I used these with Jescar compound on a 15 year old car and the finish I achieved was phenomenal. You could probably use this with 3D One and still get great results.
Absolutely!
3D One on a 50/50 pad
Stellar results on a black Toyota 4Runner. I have a bad habit of using too much polish. Had to really clean up the pad between passes.
Craig Encinitas I second that opinion as well.👍
@@craig.encinitas Do they make Uro fiber pads geared more for cutting? I believe I've seen ones meant for polishing and the 50/50 pads but not ones geared for more cutting...not that I think it matters because if those 50/50 pads and high quality correction cream can't do, nothing can.
Happy to see the Hybrid Solutions with the 50/50 pad. Going to give that combo a shot on a new/used car for my daughter.
I love how informative and useful Brian’s videos are! With all my tinkering of different things, I should bring my car to Apex to fix it the right way! 😂
Huge part of my arsenal with 3D1. I keep a lot of other combinations I’ve seen you work with. Like a golf bag, sometimes you a driver or a putter and all the woods and irons in between. I’m hooked on Sonax perfect finish and now the Angelwax line., Perfect polish has a place with the right customer too.
Amazing pads.. I heard about them on one of your videos and I bought to try and I was super impressed.. If I have a car with light scratches I use this pad with sonax cut and finish and it works amazing.. If car is bad shape I go with cut max and then second step perfect finish and some of polishing Lake Country pad... Thanks again sir.. You are the best...
My favorite pads on my favorite channel.. life is good man.. Liked before it even started! Thanks Brian! 👍👌✌
Ditto! I have the Maxshine M15 and both of the Buff and Shine Euro Fiber two Combo Pads (Cut and Polish) + the 3D One. Absolutely love them! All thanks to Apex Detail recommends.
Al Tillman there’s two types of uro 50/50 pads? Thx
@@exceldetailAbsoltely fantastic! I don't have a single complaint.
@@tundrawhisperer4821 Check out their website and videos on the full line. There is the 50/50 black/white color blend pad and then a complimenting black color only polish pad. I didn't realize it was available either until I saw a combo box called the Buff and Shine Reflection Artist. I have not expensed for the box set but did buy 2 of each microfiber pad so I can clean and dry one between panels. Great results on my latest C6 Centennial Corvette. Both are so very simple to use.
Al Tillman Okay, thank you for that info. What are your go to compound and finishing polishes? Thx
really great video as always Brian, every time I learn something new from you. Thanks a lot my friend 👍🏻
Another really informative video. I learn everytime. Thank you for your time and effort to make these videos.
Brian, your method has been adopted by myself and have taught it to my shop and staff. I absolutely can't thank you enough for this. It has improved our turn around times, improved customer satisfaction ratings, and lowered our operation cost. HUGE THANK YOU FOR THE INFORMATION YOU SHARE
Just tried this pad using G9, worked great with Sonax 04 06 on troubled areas of my 06 Pontiac Vibe.Protected with TW hybrid ceramic, very pleased. Glad to hear you're planning on bringing Mail Call back. Hats off Sir.
Thanks Brian. So glad I invested in these pads. Working on a very neglected black work van today with "ghosting" from vinyl decals. 😣 Gonna give Meguiar's Ultimate Compound a go. Lot of real estate to cover but super flat panels!! 👍
They are the best pads that I have used.
I have some OPTI-PAD euro micro fiber pads and they work exceptionally good
Like you I use these a lot. I do all my paint enhancements & 1 steps with these. They work very well with AIOs. Thanks again for a great video.
Our canvas for today :), Your the best Brian, this video is just Fantastic!!!
Thanks! Tons of info there!
I have found Griots Correcting creme works nicely with the Euro pads
yes i confirn.....I try it on my hood
Have try direct sunlight and it is safe ?
Polishing...cutting...and finishing....
Probably for me the area where I feel most exposed and most confused..
So many polish and compound options...so many pad types and manufacturers.
Do I experiment or do I stick with one brand and become proficient.
Even more complex given as a weekend warrior I'm not polishing on a daily basis.
Then you throw in the different paint types the different clear coats and the level of correction needed from swirls to scratches.
So thanks for a little more information to help in deciding what's the best path to take
-3D One, Urofiber 50/50 pad.
-Hex Logic White polish pad.
-TACsystem Total One Essential primer polish
-TACsystem One Step Master
White Ford Edge came out gleaming! The finish came out so reflective and blindingly glossy in the afternoon sun. 💫 ☀️ 😎
Yes!! This is the video I needed today. A vendor just gave me one of the Uro Fiber pads for free (part#592MFP). I can't wait to go use it. I've only ever used lake country foam pads before for paint correction.
Great info Brian! It’s good to find out what the KING uses in his shop.
Thanks Brian great video, I was about to do a course on polishing but due to this pandemic it got cancelled 😭😭😭. Thanks again and stay safe 👍👍👍
Great video Brian, it was your first video review on these pads that made me go out and purchase them. Have used them many times since then and absolutely love using them in one step scenarios. I just want to say thanks as always and hope you have a great Fathers Day weekend.
Yep love the uro fiber pads👌🏼 I buy them often 😀
They will be a staple in my arsenal for many years to come..
Thanks Brian educated again, I have the euro fiber fifty fifty , now I can use it properly.
Thank you so much for your input and explanation of products, with chemicals and pads! I really enjoy watching your videos and have learned a lot and got better in detailing because of you
Great to see another video with that pad and other suggested products 👍🏼
The urofiber pads is like a Swiss Army knife. A great tool to have in your arsenal 👍
And very EASY to clean!!!!
just had my first go with urofiber using ex0406[sonax perfect finish DA version] with a makita forced rotation polisher. I'm a literal first timer and I'd just been using a basic foam pad and the difference was remarkable, taking out about 25% more surface scratches and even diminishing medium/deepest scratches. With the forced rotary the microfiber grabs and isn't as smooth as the foam but its worth the trade off with results. The pads are machine washable as well, but I think I'll hand wash
That’s what I’m talking about loving it I just purchased the 3D one and I purchase few different pads and special the urofiber I have a black 2015 just want took things up had some dogs and cats jump on it and they not even my pets but anyway love your work I will try this out as soon as I can thanks again
u had all ur apex detailing family at HELLO!!great video and awesome tutorial video again buddy. after almost 4 years of being a true subscriber I can finish ur voice over sentences. lol.im sure I speak for every1 in the family that we r better informed,detailer,etc from ur videos,texts,emails,etc .once again thank you so very much. most people don't realize how difficult to make videos,respond back 2 us and let's not 4get running a successful detailing shop.b well stay safe and hydrated good friend
That... was a great video.👍
Thanks Brian! Great examples for getting results. Haven't been able to get hold of the EuroFiber pads yet, only 1 supplier here in Australia. Can't wait to try them though as they look the goods. Cheers mate 👍
Excellent video! Answered a bunch of questions I've had wrt the urofiber pads. I am a enthusiast, thanks in large part to your channel, and am toying with the idea of getting a more serious polisher. I have a torq 10fx and... yea, it takes forever to do correction on paint.
always great info.i love those URO Fibers!!!
Love your videos simply the best thank you brian
Could you recommend or do a video on how to clean/protect German cabriolet hoods on their vehicles such as Audi/Mercedes. This area seems very difficult to get clear successful information on in how to approach and what to use. Just an idea. Thanks 👍
I' ve been using the Griot's microfiber pads with great success, especially with the ubersoft GM clear.
Those were very similar to the Uro-Fiber Finisher.
Awesome info, great video
How well does this pad work with sonax cutmax and sonax perfect finish? I'm doing my new 2021 dodge ram rebel next weekend and those are what I will be using. Great video and keep it up, thanks!
Thanks for the great video. This is great. I got the 3d one and the eurofiber pads. Any brand you would recommend for the jeweling?
Brian how many urofiber pad you recommend for an avarege size car using with 3d one and using compressor to blow the residue after each pass?
I made my F10 with 4 pcs of 5" and 4pcs of 3", but i need to buy 2 more 3"
I am beginer and i use 3" more than 5"
Informative! Thanks B!
Amazing amount of info in this video! You're fantastic at sharing your expertise! How many of these pads do you use for an entire car while blowing them out? Also, how can I tell how hard or soft the clear coat is when working on a particular vehicle? Thanks!
Just used these on my black f150 a few weeks ago for the first time. I found they clog up really quick was my only complaint. I just did a 1 step with 3D one. If I was being really picky there were a few spots where I could have gone over with a polishing pad but for the most part fantastic results with just a torque 10fx da polisher. What do you use to clean them when you are done with job? I blew them out but should I just clean them like I would a microfiber pad?
Loving the Urofiber pads thanks to you man! Hope all is well my friend!
All is good. Be safe!
@@apexdetail85 you as well!
Greetings, which one gets more shine with microfiber pads or soft finishing foam? Thanks for your time
Thanks Brian nice video very informative.
Hi Brian, great video, how many uro fiber pads would you typically go through todo one car?
Would this pad work well with Sonax Cut and Finish?
I already started my euro pad collection! 😬
Great video ...one question i noticed you use d.a polisher more over the rotary do you prefer the d.a more now? I know you said in the past the rotary is superior
Awesome video.
Hey B, thank you for these videos you give out so much knowledge. I have a question, on a previous video you mentioned if a customer was in the budget for a multi step and a 2 step. Is a multi step considered a sub 1 correction where you would use a finishing pad after using a euro fiber yet using the same one step polish? Thanks in advance B!
does perfect finish work good with these?
Excellent work thank you for knowledge and can you do one with foam pads also please
You answered my questions in the video...🚗 👍🏻
Great video as always. Have you ever used CSI products?
Yes....not a fan.
On a Japanese car, mazda 46v soul red that’s a tri coat or tinted clear coat, super soft but gorgeous, would you have any suggestions on correcting a lighty swirled up clear? It seems to haze easily, I needed to jewel my test spot on a slow rotary to clear the haze. Thought Id do some research before continuing. Tool is a 15mm DA, the shinemate you recommended. Any suggestions on pad and compounds? Thanks
Hey man, love your videos. Im just about to.use the uro pad with 3d one to do a single stage... How long does a single 2x2 pass take ( what rate are you moving the polisher) you say a rate of 1"/sec? That seems really slow? How many passes do you do per 2x2?
Thanks as always Brian
What’s your favorite ceramic coating?
uro pads plues 3D complund is real.magic 👌❤
What’s your favorite thing for putting on for protection after the 3D One?
Are you putting on a clean pad between different compounds
Brian you mentioned on soft black paint you may need to use a finishing pad. Can you use 3D ONE with the urofiber and finishing pad?
Brian, what would you think about using the uro-fiber pads with Sonax CutMax and Perfect Finish on new black VW paint?
I was also considering investing in a bottle of the Rupes Uno Protect.
I have an 8mm Das-6 V2 DA by the way.
I know this is an old post about these uro fiber pads but I hope you respond. How do you clean them as you go panel to panel? I find it gets matted down maybe becoming less effective. I’ve tried air and pad washer. Thanks In advance
I have a question about these microfiber and eurofiber pads.
If you have to clean them in between panels , do you have Prime them again ? Thanks
How would it work with 3D Speed?
Currently polishing my f type and uro fiber with polish angel master compound is doing a perfect job removing all marring with no haze, and my 2 year old zipang coating, almost good enough to one step. I’ve found some compounds don’t work well with the uro, jescar compound for eg leaves a lot of haze but on a lake country mf cutting pad it doesn’t
Is this a good pad to correct Oxidized Single Stage white 1996 Tacoma? Great videos!
Great video!
So using the bmw as an example how would rupes uno protect perform with uro pads?
Cheers from down under!
Hi Brian. I was wondering if you had to prime the uro fiber pad
Great video as ever, in the UK 3D one, is not common, what would you recommend? Scholl, Mernzerna, Koch and Sonax compounds are readily available.
Sonax Cut and Finish
Hello from Malaysia Brian! Can i use this combo on soft and sticky paint like honda?
Do you use a pad conditioner or wet these before you put polish on?
What would you set is a better all rounder rupes yellow wool or uro pad?
Do you prefer the black pad or the white pad for finishing?
Do you clean the pads before the 1st use? I've been meaning to pull the trigger on these Urofiber pads for a few weeks now and I think this video has pushed me over the edge.
Complete newbie here. Is it okay to follow up the Turtle Wax sio2 polish and wax with another polish? Or possibly even Carbonite 845? My plan would be to switch from a urofiber to a finishing foam pad. I didn't know if building the two on top of each other would be bad or if it just is completely unnecessary. Thanks in advance for any help!
Would this pad be ok with 1 step paint? Thanks Brian
Love urofiber pads!!!
Which of the boss cream would you combine with this pad?
What do you like for finishing pads ?
Brian, great video. I use these pads often but find they are difficult to get into smaller areas as they are thin and not flexible on the backing plate. Sometimes I will switch over to an orange foam pad, but the cut isn't as good (- It might be good if the pads were a little thicker and more flexible for rounder body panels. Your thoughts?
When I get into tight areas...I make sure I have an over sized pat attached. I trace the backing plate and cut a quarter inch larger.
Awesome!!!😎
Hey guys just a quick question. I tried these pads on my rotary buffer and they don't do so well compared to firm foam pads from 3D or rupes these Euro microfibers are total garbage so my question is are these ment to be used with da only or is there a way to use them efficiently with rotary as well thank you
Hey Brian, i love your vids and value ur opinion....i currently use the harbor freight da polisher as most newbees like myself do but ive done a few corrections and feel the need to get a better polisher, possibly a 15” throw. Any suggestions for me would be greatly appreciated! Thanks as always for the great content
Maxshine M8 Pro
How about a 15mm option?
Have you used any of the 3D spider pads?
Question for anybody that maintains these pads. I used a small bit of tide cold water and diluted it heavily with water to clean out the pads after a correction. I know microfiber doesn't like those detergents that have dyes and perfumes added. Are my pads going to be effective after that? I guess I could wash them again using IPA, Dawn and APC this time. Anybody know if I'm just overthinking it? Will I still get the same performance after I do the second clean? Thanks
Will these pads work ok with a short throw polisher like the Griots G9?
Hi i am planning to use Urofiber with 3D One as my compound stage 1. I was just wanting how many pads do i require with 3D one for 1 car? do i need multiple?
Great vid
Hey brian do you not have to prime the Urofiber?
How would you clean these pads??
Hey Brian! I cannot get into these. They keep ghosting. Am I doing too large an area?