These videos are interesting, but knowing the needle size/ type and the settings used would make them very much more useful. As an owner of a PUK 5.0, the point and shoot bit is not an issue but sometimes finding the ideal setup is!
Hi! We will keep this in mind. To work safely, it's best to start with low settings for power and impulse time and to increase stepwise. More info about work projects and settings can be found here: lampert.info/en/workshop-news
Hello, we are happy to assist you further, please send us your contact details at mi@lampert.info and we will get back to you. Thank you. Kind regards from the Lampert-Team
Thank you, please unscrew by hand and replace the chuck with a new one which is available as spare part through our dealer network. Please let us know if you need further assistance at mi@lampert.info. Kind regards from Germany
Hello! The machine only welds with Argon gas connected, because Argon is necessary to shield the welding area. It is necessary to set the gas flow around 2l/min on the regulator.
These videos are interesting, but knowing the needle size/ type and the settings used would make them very much more useful. As an owner of a PUK 5.0, the point and shoot bit is not an issue but sometimes finding the ideal setup is!
Hi! We will keep this in mind. To work safely, it's best to start with low settings for power and impulse time and to increase stepwise. More info about work projects and settings can be found here: lampert.info/en/workshop-news
Hello, we are happy to assist you further, please send us your contact details at mi@lampert.info and we will get back to you. Thank you. Kind regards from the Lampert-Team
puedo soldar calibres muy delgados en oro con esta maquina?
gracias por la ayuda.
Please contact us via support@lampert.info to clarify your questions in detail
Is that welding gold?
Merci, thats correct.
Sim ka Kitna price hai
could you use this for sterling silver as well?
Hi! Check our our showroom for all application possibilities: www.lampert.info/en/showroom/
How do change the chuck on puk 2
Thank you, please unscrew by hand and replace the chuck with a new one which is available as spare part through our dealer network. Please let us know if you need further assistance at mi@lampert.info. Kind regards from Germany
Rate
Thank you for your interest - please contact us directly on www.lampert.info/en/contact/ or check out the price lists on our product websites.
I need help, inconnected the argon gas my machine does not weld.
Hello! The machine only welds with Argon gas connected, because Argon is necessary to shield the welding area. It is necessary to set the gas flow around 2l/min on the regulator.
Hello Sir, please contact us at mi@lampert.info and we are pleased to assist you. Kind regards from the Lampert-Team
@@LampertWeldingpuk 5.1 makinem daha fazla is ve kararma yapmaya başladı makine yaklaşık 3 yıllık ne yapmalıyım
Tienes el pedal en venta?
Price kiya h iska
Thank you for your interest - please contact us directly on www.lampert.info/en/contact/ or check out the price lists on our product websites.
Bonne video 👍
👍👍👍👍
Thank you for your interest - please contact us directly on www.lampert.info/en/contact/ or check out the price lists on our product websites.