I just don't understand top players in tetr io, like they "aim" the pieces so well it looks like they're teleporting the pieces to the exact spot, meanwhile me triple tapping to move it and making me slow
@@waidi3242 yeah its a measure of how efficient you are in your inputs, so that you can use the minimum amount of keystrokes to land your piece (which is faster)
@@justinhoang6293 yes but i don't understand how other players don't have to double or triple tap the direction (left and right) to move the piece when it's not far away. They just teleport there and idk how it's possible.
0 arr and speed are overrated. I insist on using 0 arr if you're already fast with your current arr, not when you're at a certain rank as sec said. I would say it's again about how comfortable are you with your setting and not about forcing you to use the fastest one just because it saves around 0.05 second avg per piece. Also never overprioritize speed over actual efficiency or timings. Settings just allow you to play faster if your fingers and your brain are ready for it. If it's just to place pieces more comfortably, I don't see that working at least in my case but if it works for you, then go for it. I also have to say I have nothing against 0 arr being used, I just feel like it's been used way too soon.
I am new and not familiar with the terms or anything. So basically, i am struggling with the handling. When I move, the pieces are always, erhmm, "slipped"? I spent fricking 2hrs figuring out my handling sensitivity but the pieces always end up 1 or 2 blocks away from my target spot. I tried play slower but no help. It feels like the tetriminoes don't stop right away when I release the button. it's like mouse acceleration in FPS games. Can someone help me figuring out what is the problem? Note: I played Tetris Effect for quite amount of time and am perfectly fine with its default handling settings.
I know this is 1 year ago but the whole idea of having non-zero arr and just timing when to stop is very inefficient AND slow at the same time. I'd recommend doing finesse regardless of your ranking, I was told to change my handling settings when I was B rank and it's one of my best tetris decisions. Tapping/sliding to a wall + tapping has a much lower chance of giving you misdrops and is usually faster as well.
noone will probably ever read this but i have a question. can you, and if you can would it be illegal to use a rolling-ish technique like in competitive NES tetris instead of relying on DAS or hypertapping playstyle? maybe not on a single button but with 4, mapped to the same key so you can simply roll as many fingers over the buttons as the distance you want your piece to go? would it work and would it be considered cheating?
@@Cookie-zn8lx you could roll your fingers over 1-4 keys depending on where you want a piece to go which is really fast and basically error proof instead of pressing one key 1-4 times which is slow as hecc or holding and releasing it which is very easy to mess up.
@@Cookie-zn8lx yeah that's true but i feel like it would still be alot more consistent and i'm just curious if it would work and if yes if it'd be considered cheating
DCD 1F-2F lol. Am i the only player in the game who has DCD to 10? If i have it lower, after harddroping a piece the next pieces appear DASed to the wall cause i dont raise my fingers after pressing rotation keys. I need the pieces to appear in the middle of the board so I can do finesse, i dont understand how everyone else doesn't do this.
I use 0 ARR, 10.8 DAS, 2 DCD and inf SDF. I am by no means an X-rank player, but my 40L PB sprint speed is 2.35 pps, TL speed varies between 1.45 to 1.6. Maybe that won't bring me to top 1, but I am still in the top 7%
@@zhungamer how do people play at 0 ARR? to me It makes no sense cos 0ms delay implies that the piece teleports to the walls of the board in one frame. how would you move the piece accurately if it does that?
@@jfdkfajsksadjlfa2218 two things, 1.) my DAS is high and my DCD is non-zero (currently 2), so some of my advice doesn't really hold (people typically use 0 DCD for "DAS retention" but I hold the directional keys as I hard-drop but other people often tap then release) so my DAS is 10, but 2.) two-step finesse ("0G 60 Hz SRS Movement Finesse"). My current 40L PB has a 83.17% finesse rate, so if you get used to 0 ARR with reasonably high finesse (at least 70%), your timing stops to depend on ARR frames, and your hands won't hurt, and can be more accurate than with ARR-based movement
VERY GOOD VIDEO 25PI25
quality video as always from sec!!!!!!!!!
we all love secs videos
so true
Mhmm
My controls: chill
My controls with "cold hands" :mdmdmdmdmd
i just made my first sub 2minute 40lines with your advices ! thanks !
hope you r under 1 min soon :)
Omgggggg I have been explaining all of this in 2 languages so many times in the last year, this video is amazing!!!!!
great video bruv
pirates haves high arr
Thank you I needed this video so bad! 😭
why do my pieces keep moving after I let go of my arrow keys?
I just don't understand top players in tetr io, like they "aim" the pieces so well it looks like they're teleporting the pieces to the exact spot, meanwhile me triple tapping to move it and making me slow
finesse gets pieces to their target as fast as possible
@@justinhoang6293 wait is that a thing that helps people? i thought it was just statistics
@@waidi3242 yeah its a measure of how efficient you are in your inputs, so that you can use the minimum amount of keystrokes to land your piece (which is faster)
@@justinhoang6293 yes but i don't understand how other players don't have to double or triple tap the direction (left and right) to move the piece when it's not far away. They just teleport there and idk how it's possible.
@@waidi3242 arr set to 0 i think so it teleports to the side
damnnn i wish i had knew this before lol, good video 👍
Thank you for the video 😃 it was very helpful
0 arr and speed are overrated. I insist on using 0 arr if you're already fast with your current arr, not when you're at a certain rank as sec said. I would say it's again about how comfortable are you with your setting and not about forcing you to use the fastest one just because it saves around 0.05 second avg per piece.
Also never overprioritize speed over actual efficiency or timings. Settings just allow you to play faster if your fingers and your brain are ready for it.
If it's just to place pieces more comfortably, I don't see that working at least in my case but if it works for you, then go for it.
I also have to say I have nothing against 0 arr being used, I just feel like it's been used way too soon.
I would say 0arr helps on starting to get use to finesse instead of dropping based on timing, which I often do before I switched to 0arr.
I am new and not familiar with the terms or anything. So basically, i am struggling with the handling. When I move, the pieces are always, erhmm, "slipped"? I spent fricking 2hrs figuring out my handling sensitivity but the pieces always end up 1 or 2 blocks away from my target spot. I tried play slower but no help. It feels like the tetriminoes don't stop right away when I release the button. it's like mouse acceleration in FPS games. Can someone help me figuring out what is the problem?
Note: I played Tetris Effect for quite amount of time and am perfectly fine with its default handling settings.
I know this is 1 year ago but the whole idea of having non-zero arr and just timing when to stop is very inefficient AND slow at the same time. I'd recommend doing finesse regardless of your ranking, I was told to change my handling settings when I was B rank and it's one of my best tetris decisions. Tapping/sliding to a wall + tapping has a much lower chance of giving you misdrops and is usually faster as well.
Finnesse vid pls
I piece finnesse and columns 4 to 6 are lethal to me
great video
yayayayay my fav youtuber
yo everyone my das is 8F
ok bacchess
noone will probably ever read this but i have a question. can you, and if you can would it be illegal to use a rolling-ish technique like in competitive NES tetris instead of relying on DAS or hypertapping playstyle? maybe not on a single button but with 4, mapped to the same key so you can simply roll as many fingers over the buttons as the distance you want your piece to go? would it work and would it be considered cheating?
but why
@@Cookie-zn8lx you could roll your fingers over 1-4 keys depending on where you want a piece to go which is really fast and basically error proof instead of pressing one key 1-4 times which is slow as hecc or holding and releasing it which is very easy to mess up.
even if u could do that u wouldnt benefit from it in tetrio
just take ur time placing tetriminos. its not like the gravity for tetriminos is as fast as the one in nes tetris
@@Cookie-zn8lx yeah that's true but i feel like it would still be alot more consistent and i'm just curious if it would work and if yes if it'd be considered cheating
Can you make a video on jstris to tetrio handling?
i dont think it warrants a video you just use the formula tetrio das = jstris das - jstris arr
When you’re das is 4.2 with 0arr and max sdf
1:28 how you drop that piece and move it pls i wanna know nobody tells me
he says it in the vid, set sdf to max
DCD 1F-2F lol. Am i the only player in the game who has DCD to 10? If i have it lower, after harddroping a piece the next pieces appear DASed to the wall cause i dont raise my fingers after pressing rotation keys. I need the pieces to appear in the middle of the board so I can do finesse, i dont understand how everyone else doesn't do this.
but how do i go into settings?
cool video sec
Thanks man
thanks
i always thought sdf was soft drop framrs :/
yes
Man, im in u rank and my ARR is still the far from 0
mine is 4.8f
Where tf are the settins
In the home page, click config (home page is after the log-in screen) and then go to handling (inside config)
@@lololololol1342 Thx man. I am just dumm
@@___txbi___1562 late reply but np :)
am i the only one that has it at a slower interval yet still does 1.5pps?
I use 0 ARR, 10.8 DAS, 2 DCD and inf SDF. I am by no means an X-rank player, but my 40L PB sprint speed is 2.35 pps, TL speed varies between 1.45 to 1.6. Maybe that won't bring me to top 1, but I am still in the top 7%
@@zhungamer how do people play at 0 ARR? to me It makes no sense cos 0ms delay implies that the piece teleports to the walls of the board in one frame. how would you move the piece accurately if it does that?
@@jfdkfajsksadjlfa2218 two things, 1.) my DAS is high and my DCD is non-zero (currently 2), so some of my advice doesn't really hold (people typically use 0 DCD for "DAS retention" but I hold the directional keys as I hard-drop but other people often tap then release) so my DAS is 10, but 2.) two-step finesse ("0G 60 Hz SRS Movement Finesse"). My current 40L PB has a 83.17% finesse rate, so if you get used to 0 ARR with reasonably high finesse (at least 70%), your timing stops to depend on ARR frames, and your hands won't hurt, and can be more accurate than with ARR-based movement
I use 0.1 arr LMFAO
only the pros play with 0 DAS and 0 ARR
but no one plays with 0das
@@speechless1883 bots
@@JustinRed624 0 or 1?
@@speechless1883 well then I guess you just aren’t a pro smh my head
@@pravin26 "smh my head" shaking my head my head right now my guy?
VERY GOOD VIDEO 25PI25