Please note Low Swr is good and high return loss is also good ! Apologies for the confusion !
3 ชั่วโมงที่ผ่านมา +4
10:27 what? return loss has nothing to do with the loss of the transmission line (such as coaxial cable). loss that occurs in a transmission line is called attenuation. return loss is a measure of how much of the RF signal that's being generated is reflected back to the source and it indicates an impedance match or mismatch within a system. high return loss is desirable in case of loads such as antennas because it indicates that most of the RF energy is getting used up at the load rather than reflected back. while you can measure coax attenuation with devices such as portable VNAs, and even the with RigExpert VNAs, it's wrong and misleading to say that return loss is an indication of cable attenuation. no offence but your presenters should be more careful while talking to a wide audience about things they don't fully understand.
In TDR mode is the measurent starting from the analyser end as i bought some ultraflex 7 from you last week n theres a break in it n dont want to throw the whole lot away? Its on the outer the break i know that .....
Guys while this is a very nicely presented video, the standard falls well below of what the norm is for the channel. I counted at least 4 bum steers that could confuse someone new to Amateur Radio. 1.Return loss, 2.RX chart and resonance, 3. Coax VF- only needed for some functions, 4.Calibration - Needed at times to null out coax to obtain a true reading. I think Dave does a great job presenting and enjoy really seeing him in these videos. I just dont want to see newbies perhaps viewing it out of context. I love Rigexpert gear and wholeheartedly recommend it to anyone.
Please note Low Swr is good and high return loss is also good ! Apologies for the confusion !
10:27 what? return loss has nothing to do with the loss of the transmission line (such as coaxial cable). loss that occurs in a transmission line is called attenuation. return loss is a measure of how much of the RF signal that's being generated is reflected back to the source and it indicates an impedance match or mismatch within a system. high return loss is desirable in case of loads such as antennas because it indicates that most of the RF energy is getting used up at the load rather than reflected back.
while you can measure coax attenuation with devices such as portable VNAs, and even the with RigExpert VNAs, it's wrong and misleading to say that return loss is an indication of cable attenuation. no offence but your presenters should be more careful while talking to a wide audience about things they don't fully understand.
100% correct
swr is a complex subject
You got it wrong a higher return loss is better not lower return loss.
In TDR mode is the measurent starting from the analyser end as i bought some ultraflex 7 from you last week n theres a break in it n dont want to throw the whole lot away? Its on the outer the break i know that .....
I didn't see 4m on the predefined bands? I take it that it will still test that band if you key it in?
hi dave thank u for the talk on the rig expert interesting piece of kit have a nice Xmas and new year 73s all the best Andy m6aia
Guys while this is a very nicely presented video, the standard falls well below of what the norm is for the channel. I counted at least 4 bum steers that could confuse someone new to Amateur Radio. 1.Return loss, 2.RX chart and resonance, 3. Coax VF- only needed for some functions, 4.Calibration - Needed at times to null out coax to obtain a true reading. I think Dave does a great job presenting and enjoy really seeing him in these videos. I just dont want to see newbies perhaps viewing it out of context. I love Rigexpert gear and wholeheartedly recommend it to anyone.
I picked up on the return loss higher is better not lower, every newbie will be going for low return loss now.
I prefer looking at the smith chart.
low swr is good obviously, its the the other way around with return loss higher is better not lower as you mention in the video . 73
Rookie mistake. 73, G1DRP
🙂👍