KAWASAKI BAJAJ CT 100 OVERHAULING PAANO MAG BAAK NG MOTOR OR OVERHAULING

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ต.ค. 2024

ความคิดเห็น • 108

  • @magztv5668
    @magztv5668 ปีที่แล้ว +1

    bozz salamat s mga videoz m ng dahil sau natuto aq ng qnti s pag auz auz ng motor.more video pra dagdagan p ang kaalaman q...TY

  • @geraldinebayos9730
    @geraldinebayos9730 3 ปีที่แล้ว

    deserve po ninyo million subs dahil po sainyo natuto akong mag overhaul ng motor thankyou po godbless

  • @abu-saadjma7499
    @abu-saadjma7499 4 ปีที่แล้ว +1

    Sir, maraming salamat sa mga kaalamang pinapakita nyo at kagalingan sa makina at bpa.
    Thank you sa n u jma po ng Cotabato City

  • @simplelifevlog-16
    @simplelifevlog-16 4 ปีที่แล้ว

    Gusto ko sana boss mgpagawa sa inyo ng motor badjaj ct 100, overhaul na at papalitan kung ano dapat palitan,.,napakalayo nyo nmn po sa cavite,. Maayos at malinis kayo mg gawa ng motor.,., pa shout out nmn boss sa mga nagaayos ng motor sana ayosin nila at dapat laminis ang pag gawa .,., good job boss lagi ako nanood sa chanel mo.

  • @jomaribiares1841
    @jomaribiares1841 4 ปีที่แล้ว +1

    salamat boss may na totonan nanaman ako palagi akong nanonood ng video mo pa shout out naman jan

  • @angelitamorate3594
    @angelitamorate3594 2 ปีที่แล้ว

    boss johnrey palagi po kming nanonood ng mga video mo po pa shout out naman morate family po naga city bicol po thanks po and more power.

  • @jepoytiglao5750
    @jepoytiglao5750 4 ปีที่แล้ว

    Galing nyo talaga sir..lahat ng motor maning mani lang sa inyo.

  • @tifhanienicoletorres4340
    @tifhanienicoletorres4340 4 ปีที่แล้ว +1

    Nice one 👍👍👍 sir malaking 2long saken tong videos mo my Bajaj din aqu nka stock na salamat pa shut out nlang tifhanie Nicole viernes ng saudi Arabia godbless

  • @charlesandrewramos1705
    @charlesandrewramos1705 4 ปีที่แล้ว

    Boss honda tmx 150 overhaul at wiring guide please. Galing ny mga vids mo. Godbless po!

  • @dongpeeworks9161
    @dongpeeworks9161 3 ปีที่แล้ว

    Boss salamat sa pagtururo mo mynalaman ako sayo same po tayo mekaniko ☝️🙌🙏

  • @pabstvvlog
    @pabstvvlog 2 ปีที่แล้ว

    Galing nyo idol salamt sa pag share

  • @ryancolle8281
    @ryancolle8281 4 ปีที่แล้ว

    Paps malaking tulong ang mga videos mo marami ako natutunan mga diskarte pagaayos ng mga motor.More power sa channel mo shot out mo aq from Santa rosa Laguna.Meron aq tanong sayo kc marami aq unit na motor honda lahat with side car pampasada ang gamit ko na langis ay kawasaki red 20W-50 ok lang ba yun walang masamang epekto sa makina?Kc dati ko gamit honda gold 10W-30.Salamat sayong kasagutan more power ulit sa channel mo.

  • @wintv3642
    @wintv3642 3 ปีที่แล้ว

    Maliwanag paliwanag, boss salamat❤️sa video mo

  • @mohayminmamasabayang4050
    @mohayminmamasabayang4050 3 ปีที่แล้ว

    Bo's gawa ka nman ng video Kung paano mag lagay ng bouble spring valve. Gusto ko Kasi e try sa bajaj100 ko. Salamat.

  • @ericsonpelayo8292
    @ericsonpelayo8292 2 ปีที่แล้ว

    Pgdting tlga s makina malupit tlaga c boss john,,pasigaw nmn Eric ng sta mesa

  • @MommyEuniceChannel
    @MommyEuniceChannel 3 ปีที่แล้ว +1

    Pang ilan beses kunang ulit ko sa ct100.. sana may bago ulit ct100 na papagawa

  • @reynaldoaldavejr6018
    @reynaldoaldavejr6018 4 ปีที่แล้ว

    Sir salamat sa vedio mo na bajaj kc may natutunan ako sayo...sir tanong ko lang anong sukat ba ng tools na pang bukas ng clutch housing nut...at stator pully

  • @dirtbaikar3578
    @dirtbaikar3578 3 ปีที่แล้ว

    sana sir maka gawa ka ng video mag baak ng motor ng ct100 na walang power tool ng ginagamitan ng compressor kasi marami samin walang tool na gayan. yan naman po ay request lng. isa na po ako sa mga subscriber and follower mo po.

  • @mohayminmamasabayang4050
    @mohayminmamasabayang4050 3 ปีที่แล้ว

    Gawa ka nman ng video Sir paano mag lagay ng bouble spring valve sa motor. Salamat.

  • @albertbeltran4375
    @albertbeltran4375 4 ปีที่แล้ว

    Salamat SIr., God Bless

  • @mohamedtuban1415
    @mohamedtuban1415 3 ปีที่แล้ว

    buss madang gabi poh

  • @kimberlyfernandez-f7y
    @kimberlyfernandez-f7y ปีที่แล้ว

    Pede puba Yung crank case ng old model ..Sa new model na bajaj 100

  • @arielmotoshop
    @arielmotoshop 4 ปีที่แล้ว +1

    Watching you boss

  • @hentjirodrigo
    @hentjirodrigo 2 หลายเดือนก่อน

    Idol ano ho bang brand ng engine bearings Ang mas mainam sa. CT 100 natin?salamat po ng marami.from negros

  • @williamordona3431
    @williamordona3431 2 ปีที่แล้ว

    Gud day po. Meron po b washer Ang nakalagay sa crankshaft

  • @samzerimar1344
    @samzerimar1344 3 ปีที่แล้ว +1

    Boss,panu pag nag stock up Ang kambyo ng Bajaj ct100?

  • @marklouisedamiano4105
    @marklouisedamiano4105 3 ปีที่แล้ว

    Sir may washer poba sa clutch hub ang ct100 2010 model

  • @ryanquinto8456
    @ryanquinto8456 3 ปีที่แล้ว

    Anung tawag dun sa tubo na maliit, ung daanan ng langus paakyat sa cylinder head,....

  • @koityubs1631
    @koityubs1631 4 ปีที่แล้ว

    Boss pwed nba pngbaklas ang 24 pcs 3/8 drive socket set. o ang 1/2 set ba?? Preply..

  • @kumokonani-ka5370
    @kumokonani-ka5370 5 หลายเดือนก่อน

    Boss ano number ng tools lahat para sa overhaul ng Bajaj CT 100.??

  • @wilmarodarbe5678
    @wilmarodarbe5678 4 ปีที่แล้ว

    Boss anung magnetto puller pra sa ct100.planu ko kasi bumili.kaya lng wala available tmx155 and xrm 110 lng daw.pwede ba yun

  • @almamaerivera3186
    @almamaerivera3186 ปีที่แล้ว

    My tanong ako de platino ba Ang Bajaj old model?

  • @jayjayreyes9210
    @jayjayreyes9210 3 ปีที่แล้ว

    Morning ser jhon.ask q lng po KC ung Bajaj q eh ball bearing na siya kaso bkit wla siya takip sa lbas.ik po ba patankpan q ung butas sa lbas.

  • @RiohardDeasis
    @RiohardDeasis หลายเดือนก่อน

    bos saan may makukuhanan crankis ng ng baja 100 kasi nabasag po yung crankis dahil sa kadina bos na butas

  • @tigbakaytv3900
    @tigbakaytv3900 4 ปีที่แล้ว

    👍

  • @joebertcabreta2547
    @joebertcabreta2547 4 ปีที่แล้ว

    thank you sir.

  • @wendilyntabuloc7868
    @wendilyntabuloc7868 4 ปีที่แล้ว

    Pa shout naman po idol
    Jericjoy

  • @Itayniakeylaeyl
    @Itayniakeylaeyl 3 ปีที่แล้ว

    Sir idol gandang araw po.. sir paturo naman po kung anu po tamang tune ng carburetor ng bajaj ct100 po yung new Model po. Yung fiber plastic po yung block.. napansin ko po kasi yung 30 kilometers ko po nakakakunsumo ng 30 pesos po na unleaded gasoline po.. parang matakaw po ata ay.. dapat ba sir gawin ko mas rich ang hangin po? Salamat po sir sa sagot..

  • @charlesjamessaga4167
    @charlesjamessaga4167 2 ปีที่แล้ว

    Bos,,, ano kaya problem ng rosi 110 binaak ko ang makina pero ayaw pumasok ang neutral at medyo matigas ikambyo,,,pero pag ginamitan ng allen 5mm dun sa tongel malambot nmn ang kambyo saan kaya yun bos jhonrrey,?

  • @boyetmelgar
    @boyetmelgar 4 ปีที่แล้ว +1

    Hi sir pa shoutout po...

  • @kingjustintzy9320
    @kingjustintzy9320 4 ปีที่แล้ว

    kpag ang timing chain po b ng ct100 ay umuugong na palitin n po ba yun o mahigpit lng sya kc bago pa po bajaj ct100 ko eh...kpag mabilis lng nman po sya umuugong

  • @frederichcabuslay8212
    @frederichcabuslay8212 4 ปีที่แล้ว

    Sir saan ka bumili ng iyung 8mm na pang 1/2 drive sa pneumatic impact?

  • @rexnicdao5148
    @rexnicdao5148 3 ปีที่แล้ว

    Boss magkano dapat budget pag magpa overhaul Ng bajaj ct100..

  • @simplelifevlog-16
    @simplelifevlog-16 4 ปีที่แล้ว

    Pwedw ba kayong pumunta dito cavite

  • @clarkjjenodia1501
    @clarkjjenodia1501 3 ปีที่แล้ว

    Lods magkano po ba ang kabilang cover nang makina lods

  • @crisjoy5865
    @crisjoy5865 2 ปีที่แล้ว

    Chef ano pong sirA s motor ko bajact100 piro ayaw ma crank po ano pong gagawin ko chef

  • @john2berto193
    @john2berto193 4 ปีที่แล้ว

    Boss patulong bakit sumasayad Ang timing chain sa crank case salamat sa sagot boss

  • @astrovirus2038
    @astrovirus2038 4 ปีที่แล้ว

    Boss mga magkano ho ang pag overhaul ng ganyan sa mga mekaniko

  • @jaimeong3351
    @jaimeong3351 3 ปีที่แล้ว

    Idol, nag overhaul din po ako ng ct100 ko gamit at tutorial mo,tanong ko lang po,natural lang po ba ung may kalog ang clutch housing ko? Ok panaman po clutch housing ko walang gasgas,nag tataka lang po ako bakit may play.kahit magpit na ung locknut

  • @emmantoyzblogz4842
    @emmantoyzblogz4842 ปีที่แล้ว

    Sir pag mag overhaul di naba kailangan Ng timing?

  • @EmmanuelLamadora
    @EmmanuelLamadora ปีที่แล้ว

    Paano ayusin yong clutch na Hindi nag function ok nman ang mga kambyo yon lang Hindi siya nag function pag pisilin ko yong clutch cable

  • @jomelalicos8287
    @jomelalicos8287 4 ปีที่แล้ว +1

    Good eve sir johnrey tanong ko LNG baka may idea ka po meron kc ako dtong ginagawa n ct100 n bajaj ang problems nya sir na ugong ang sigunda pero ung 1st 3rd at 4 th nya ok nmn smooth sya ung second gear lng tlga may ugong ano kaya solusyon dun sir di ko mahatulan n for overhaul kac smooth nmn ipasok kambyo ng second gear. E kaya LNG pag bitaw ng clutch may ugong tlga baka may idea k po sir salamat..

  • @hezeljohnmarcsolangon4679
    @hezeljohnmarcsolangon4679 3 ปีที่แล้ว

    Active pa ba si sir? San po sila sa cavite sir? Bago na piston at block at valve seal sir mausok na puti pa rin po

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  3 ปีที่แล้ว +1

      Candelaria quezom sir macdonlads highway po likod po nun palapaan motor shop

    • @hezeljohnmarcsolangon4679
      @hezeljohnmarcsolangon4679 3 ปีที่แล้ว

      @@palapaanjhonnreyp8792 layo pla sir ty sa reply sir ayos po video nila. Support po new subscriber po

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  3 ปีที่แล้ว

      Salamat po sir dmi pa nyan video last month at ilang nakaraan dmi po kayo idea notification bell sir all mo para po mag notification sa inyo uplod kong bago

  • @geraldinebayos9730
    @geraldinebayos9730 3 ปีที่แล้ว

    sana masagot nyo po ang motor ko po bajaj ct100 bakit po kaka start ko palang ng motor mainit na agad ang block at nakita ko usok sa mismong block ang init tlga nya, at bigla nalang nawala ang mga ilaw, at hindi na sya umandar ano po kaya dahilan? nag overhaul kasi ako tapos nag change gas ako ng unleaded..

  • @deobertfrancisco7577
    @deobertfrancisco7577 ปีที่แล้ว

    Saan po location ng shop nyu sir?

  • @jimsmotogarage
    @jimsmotogarage 4 ปีที่แล้ว

    boss ask ko lang po yung bajaj kopo kasi kapag kinikick mo sya ay hindi sumasama yung magneto ano po Kayang sira

  • @michaelgordo711
    @michaelgordo711 4 ปีที่แล้ว

    Sir my problema po ako sa motor ko bajaj ct100. Ung segunda nia pumapalya o umiislide. Tapos mhina din humatak segunda nia. Ano po kya problema nun sir?

  • @edgarmagbag9219
    @edgarmagbag9219 4 ปีที่แล้ว

    Boss anu kaya naging problema bakit ayaw mag kambyo kahit nakaclutch nman,nabangga kasi sa may kambyuhan,mild lang nman pagkabangga,tpos ayun ayaw n magkambyo,bajaj ct100

  • @nelsongenelaso7538
    @nelsongenelaso7538 4 ปีที่แล้ว

    Hi sir,,,,gandang araw,,,may makapal na putting usok na ang ct100, ano na po ang palitin,,,,tnx po..

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว +1

      patingnan nyo muna piston ring at valave seal

    • @Yimotovlog
      @Yimotovlog 4 ปีที่แล้ว

      Pwede po ba barena gmitn pang tanggal turnilyo

  • @wendellemmanuelaromin5654
    @wendellemmanuelaromin5654 4 ปีที่แล้ว

    Idol Anu Po kaya dahilan bkit nahihila ung magneto ng Bajaj ct 100 in and out 2mm or 3mm ang clearance idol.i hope matulungan mo ako idol

  • @bucongarian3887
    @bucongarian3887 4 ปีที่แล้ว

    Paps san ang pilot bearing dun?

  • @Mizrach-op5pi
    @Mizrach-op5pi 4 ปีที่แล้ว

    Bos tnong ko lang ano sira kpag piga mo ng clutch my kumakaluskos sa loob.sa clutch lining ba yun lalo na kapag maririlease k ng kambyo

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว

      Pwedeng clutch bearing Kung nauugung SEGUNDA overhaul Kung hd nman 628 bearing lng ulyun

    • @Mizrach-op5pi
      @Mizrach-op5pi 4 ปีที่แล้ว

      Bos thanks very big

  • @ariesamurao9478
    @ariesamurao9478 4 ปีที่แล้ว

    boss anonkaya sira ng ct100 ko ayaw umandar my gumagalas sa may clutch hausing

  • @edithadinolan2097
    @edithadinolan2097 ปีที่แล้ว

    Sir asa dapit imong location

  • @jeraldinovero6400
    @jeraldinovero6400 4 ปีที่แล้ว +1

    Ser tanung lng, ung 1/4 na air compresor,pwede na po b? Sa impact wrench

  • @donaldmungcal5789
    @donaldmungcal5789 4 ปีที่แล้ว

    Boss kapag nagpalit po ba ng bagong segunyal ng tmx 155, kailangan po ba na bago din ang magneto? hindi po ba mawawala sa balance yung segunyal?

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว

      hindi nman

    • @donaldmungcal5789
      @donaldmungcal5789 4 ปีที่แล้ว

      @@palapaanjhonnreyp8792 salamat po, balak ko po kasi bumili ng bagong segunyal ng tmx 155, gamitin ko na lang yung dati nyang magneto

  • @francisvangeest6360
    @francisvangeest6360 3 ปีที่แล้ว

    Magkano labor nyan boss pumakat kasi sproket ko

  • @jomaribiares1841
    @jomaribiares1841 4 ปีที่แล้ว

    boss ano tawag jan sa pinang babaak mo ng makina yang naka kabit sa may kumpresor at saan nakaka bili nyan

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว

      sa lazada meron nyan peumatic air compresor

    • @AnonyMous-fj2uv
      @AnonyMous-fj2uv 4 ปีที่แล้ว

      @@palapaanjhonnreyp8792 dna ba kailangan NG impact drive pag meron nyan boss?

  • @jeffreyborres7158
    @jeffreyborres7158 4 ปีที่แล้ว

    Paps good day po,ask ko lng po,pag hinahatatak ko po magneto ng ct100,e may play,natural lng po ba un,tnx and godbless po

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว

      Sadya Yun sir clearance

    • @jeffreyborres7158
      @jeffreyborres7158 4 ปีที่แล้ว

      @@palapaanjhonnreyp8792 sinilip ko po kc pag hinahatak ko e lumalabas sa housing ung bearing ng segunyal,d po kaya maluwag na po housing ng bearing,tnx and god bless po

  • @jerrysambahon1075
    @jerrysambahon1075 3 ปีที่แล้ว

    Sir maytanung po Ako may motor po Ako na Bajaj pag nagiinit po Yung Makina kosang namamtay Salamat po

  • @carlobarroga82
    @carlobarroga82 2 ปีที่แล้ว

    Magkano lahat sir nagastos mo

  • @AnonyMous-fj2uv
    @AnonyMous-fj2uv 4 ปีที่แล้ว

    Bos ask ako about ct100. Ano problem sir kung ayaw gumana kicker. Makick mo sya pero d nya macrank. Kung buksan mo ung sa timing chain makita mong d umiikot ung timing chain kapag kinick start mo. Pasagot boss

    • @palapaanjhonnreyp8792
      @palapaanjhonnreyp8792  4 ปีที่แล้ว

      ibig sbihin po nun ay clutch lining nayan

    • @AnonyMous-fj2uv
      @AnonyMous-fj2uv 4 ปีที่แล้ว

      @@palapaanjhonnreyp8792 OK thanks po. Ung sa boxer nmn boss bakit ung nut NG clutch housing e humuhigpit hanggang sa dna makick ung kicker. Pag buksan mo at icheck ung clutch housing ayaw maikot. Pag niluwagan mo nut nya OK na ikot na ulit clutch housing den makick na ulit

    • @akira011401
      @akira011401 4 ปีที่แล้ว

      magkano po gastos pa overhaul ng ct100? salamat in advance

  • @markjosephaquino9324
    @markjosephaquino9324 4 ปีที่แล้ว

    Ano sukat po ng bearing sa clutch po

  • @chetubiera6195
    @chetubiera6195 4 ปีที่แล้ว +1

    Paano magfull wave ng euro 110

  • @davealegado7210
    @davealegado7210 4 ปีที่แล้ว

    Boss, pwede ba ma 5speed or 6speed ang ct100?

  • @romerofernando8934
    @romerofernando8934 7 หลายเดือนก่อน

    location nyo po

  • @ronroldan5814
    @ronroldan5814 2 ปีที่แล้ว

    Ano yung baak?

  • @jungranil3216
    @jungranil3216 4 ปีที่แล้ว

    Pa-shout out po lods😁

  • @markjosephaquino9324
    @markjosephaquino9324 4 ปีที่แล้ว

    Paps

  • @vengelbicoltv1536
    @vengelbicoltv1536 4 ปีที่แล้ว

    Boss shot out po nman po name ko vengel serrano frm saudi dammmam

  • @lyssalabiaga5009
    @lyssalabiaga5009 4 ปีที่แล้ว

    Bos poydi ko msg tuon

  • @clarencecruz3703
    @clarencecruz3703 2 ปีที่แล้ว

    Sir pede po ba ko mag message sayo sa fb

  • @ronroldan5814
    @ronroldan5814 2 ปีที่แล้ว

    Ano yung baak?