The piston of the engine has been fixed in to the wrong direction. Though I corrected it, I couldn't remember to correct it when editing. Pleese appologise for the inconvenience you faced. 🙏
You guys are amazing restorers of motorcycles! Now relax and enjoy watching a Great Channel *"Sailing Into Freedom"* it's full of Aussie humour and you'll get the piston the right way, in the next restoration project!
Yes piston wrong and it's not a proper head gasket as it should have a copper or metal rim on the inside also they used the same bearings seen a bit of rust or some thing on them and they went in to easy
@@raymondlidy5918 TBF, especially with NOS, there's a chance of minor surface rust. And ease of bearing insertion is a general theme on this channel. Secret off camera freezer for parts?
Awesome job, wish I had such a good memory 😄, I still never get to see you hone out the cylinder bore or put the new rings on, would be interesting for many people who want to learn how it's done, I assume that you do hone the bore 😉, thank you, great videos that I highly recommend.
Salut curieusement les 125 tzr et les TZR80RR et TZR50RR même pièces à peus prêt même l'entraîneur de compte est pareil ravis bon boulot comme d'habitude , je suis un grand passionné phase 1 pour la TZR80RR et la TZR50RR j'en possède une rare
The piston position is fine. If you are in the northern hemisphere, the arrow points to the exhaust port, if you are in the southern hemisphere, the arrow points towards to the reed valves. 😂
congratulations ❤️ Sir I would like to give us the brand or the good quality that you use, as pienture of engines and accessories and oil ... ext thank you very much
Back in 1992 the fun of finding out how to pin the power valve open, no power no power, 7k rpm ooooh shit, we never had the solenoids fitted here in the UK as at 17 you were limited to 12bhp
The piston of the engine has been fixed in to the wrong direction. Though I corrected it, I couldn't remember to correct it when editing. Pleese appologise for the inconvenience you faced. 🙏
Hello
Sir mere pass ek discover h uska restoration katana h
We have tzr too at malaysia
අය්යෙ Yamaha TW200 එකක් Restore කරමුද ??? Contact කරගන්න විදිහක් තියනවද ???
sir you have any contact number for business related discussion
Nice restore, glad to hear you corrected the piston direction. One other thing, you should soak the new clutch plates in oil, for at least an hour.
Or, at least, oil the disks one by one
And it should be better to uninstall the bearings with an extractor (never use the hammer with bearings)
I like to soak clutch plates in oil for at least overnight
I had that bike when i was a tear away kid years ago, sweet little bike, waiting on the rest of the bikes revival :)
this is the only youtube channel
... that i never skip...
Yes , piston was fitted on the wrong position but you are a PRO , Very good job . I will start doing a restore on mine too .
Мы тоже используем abro, в России в Хабаровске
no apology needed, your work is excellent and I love your videos! Thumbs up from the UK!
Sensacional, ficou novo!!🇧🇷👏👏
La flecha que está en el pistón, en las motos 2 tiempos va para el lado del escape, muy buenos videos amigo 💪😎⚙️
Iba a decirle lo mismo🤣
सर आपके पास तो अद्भुत कला है जीनियस हो आप मुझे आपकी सभी वीडियो बहुत अच्छी लगती है
Шикарно все подробно показывает, лайк👏
You guys are amazing restorers of motorcycles! Now relax and enjoy watching a Great Channel *"Sailing Into Freedom"* it's full of Aussie humour and you'll get the piston the right way, in the next restoration project!
Excellent job.. සුපිරිම තමා
ඉක්මනට අර මයිනර් කාර් එකේ full restoration එක ඕන 🤩🤩🤩🤩🤩
आपका काम बिल्कुल अमेजिंग है
belo trabalho ficou muito bom , profissional com talento . brasil
เป็นคลิปที่ดีมากๆ
Ó timo trabalho o motor ficou lindo parabéns sou fã dos seus vídeos parabéns 👏👏👏
This is the best restoration diy i ever seen here in you tube great Job
Check my TH-cam please for these engines rebuilt
Здрасссссь!)))
Que genios!me gustaría ver una restauración de Suzuki fx o Yamaha Sigma !
Me gustaría uno de la Yamaha rxz135 2t, exelente video me gustó mucho tuve una tzr125 fue una de mis primeros avioncitos grandes recuerdos.
Great video fantastic job stay safe 🇬🇧👍🏻
nice work! what a cool bike!
10:30 hehehehe looks like he forgot about the piston direction arrow 😁😁😁
Excellent work👍😍
Motorzinho desse 2T e um ouro!
Como siempre buenos vídeos
Direction of piston is totally wrong
The direction arrow must be at ex port
I noticed it aswell
Let's hope they read the comments before the final video!
Yes piston wrong and it's not a proper head gasket as it should have a copper or metal rim on the inside also they used the same bearings seen a bit of rust or some thing on them and they went in to easy
@@raymondlidy5918 TBF, especially with NOS, there's a chance of minor surface rust. And ease of bearing insertion is a general theme on this channel. Secret off camera freezer for parts?
Banyak juga bagian yg terkesan asal-asalan aja masangnya mas, kayak gk ada seriusnya ngerakit mesin 😂
Great work looks good.
Parabéns show de bola.
Very good job buddy!!!!
You are doing great i like your videos keep it up.
Good job as always.
You did your job very well! I am also a person who likes repairing and restoring! I hope your videos will be useful to me and everyone! Thank you
Thank you very much!
නියමයි මචන්.
great engine :)
Awesome job, wish I had such a good memory 😄, I still never get to see you hone out the cylinder bore or put the new rings on, would be interesting for many people who want to learn how it's done, I assume that you do hone the bore 😉, thank you, great videos that I highly recommend.
Saludos desde México
Real master!
Todo perfecto enos el piston, la flecha que lleva en la cabeza siempre debe apuntar hacia el escape
Una consulta, esta bien poner tanto pegamento ?
@@senorpijon8356 si, el pegamento sobrante lo escupe al apretar los tornillos, si queda algo por dentro del boque no hay problema ya que no daña nada
Trabalho excelente dez de mais
Beautiful to watch.
Wrong piston direction... that arrow must set to bottom/exhaust... Engine will run like normal, but piston ring will not last long
Muito tope esse motor
Salut curieusement les 125 tzr et les TZR80RR et TZR50RR même pièces à peus prêt même l'entraîneur de compte est pareil ravis bon boulot comme d'habitude , je suis un grand passionné phase 1 pour la TZR80RR et la TZR50RR j'en possède une rare
Amazing video Brother
nice vasy ander sy saf the
You are a máster friend!!!!
Waw i love it 🤩👍👍,,
Next time please do a restoration video of Mopeds. Specially Piaggio Ciao... Superb video!!!! නියමයි බොක්ක
عمل رائع ومشوق
Nunca arrancoooo!!!
I am waiting for this bike full restoration video
Muito top!
2Stroke Never Die 💪
Waiting to see this full restoration vedio
.plz ASAP..
Piston installed wrong way. And most important thing don't use screw drive in gear to hold or tight nut. It causes to damage gear and make nose.
Muy buen video, pueden restaurar el motor de la tzr 250 1kt?
Excelente...
Chất như mới
substance like new
Restalraçao topl
10:39 Man Conversely, the piston should point towards the exhaust outlet port, not towards the suction valve
You're amazing! I can't remember at all, too much shit.
Sand blassting 😍👍
Интересно работаешь
Muito bom trabalho gostei da restauração só acho que vc exagera muito na cola
Bwhahaah, the piston is incorrectly installed!!!
th-cam.com/video/w5npGG2Xj3Q/w-d-xo.html
If you ever put a piston in and there's no arrow, the 2 small notches for rings to grip over are always at the back of the piston 👍
Waaooooo, very nice
Good rrdtaurscion, but I think the ratatouille stayed around, since the arrow points towards the intake, it should point towards the exhaust
superb
Nice...
TZRのレストア完了した走りの映像見せて~♥独学ですか?
Good👍👍
Dari barang berkarat menjadi mesin yang bisa dipakai
Muito legal
Jos mas
The piston position is fine. If you are in the northern hemisphere, the arrow points to the exhaust port, if you are in the southern hemisphere, the arrow points towards to the reed valves. 😂
Tt is a very good jop ,
Wow 🤩
congratulations ❤️ Sir I would like to give us the brand or the good quality that you use, as pienture of engines and accessories and oil ... ext thank you very much
GOOD 1
your video will be even more interesting to watch if the broadcast is up to the resistance of machine testing
Shouldn't the arrow on the piston points towards the exaustport ?
ใส่ลูกสูบผิดทางครับ
Top
👏👏👏👌
good
Good
Mui guapo el vídeo lo que el pisto va al revés
Do full bike restoration
👍👍
mal asunto o no lo a montado el mismo que a cerrao el motor o a cometido un gran error por lo demas todo de lujo
Lắp ngược Picton rồi kìa
Where do you live bro, nice job
Back in 1992 the fun of finding out how to pin the power valve open, no power no power, 7k rpm ooooh shit, we never had the solenoids fitted here in the UK as at 17 you were limited to 12bhp
The good old days m8 open the valve, bore up 1mm to 57.4 pure flyers until 97 onwards bikes, I've got sum dtr on my channel
Piston is backwards. Arrow is supposed to point towards the exhaust port always.
❤️👍
TZR bke eke full restoration video eka denne nathda...?