Taking a break from my Ferrari 308 build is not by choice. Sometimes there are just other priorities, like building an elevator to help get tires up and down in the shop. #langmuir systems #fusion360
I have a very similar shop with the same plasma table still haven't tried using the table or the new hypertherm xp45 someday I will figure it out! Great video thanks for sharing
I'm thinking a limit switch at the top and bottom would finish this thing off nicely so it always stops at the same spots. Just wire them in series with your up and down buttons up at the winch.
So your not just a pretty face but an elevator mechanic also. Kudos to you. You like to keep your content mixed up and that is another reason to have subscribed
Lou, that was pretty cool making that. Your very talented. Nice to see other projects on your channel besides the ferrari. Don't get me wrong, I do love that car. Looking forward to the next one.
Very nice design u made , but what about safety part if the winch cable breaks how are you going to save the free fall. Please share video for that too. What capacity winch have you used. I think if you two winches one up and one down both working in opposite directions then may be if one string breaks the other one would definitely save you.
@@LouTrottier I am thinking about making a garage. Attic lift using unistrut rails on the wall. I will have to build a wood base. Or bolt the tubing since I am not a welder.
@@LouTrottier I thank you very much Lou Trottier. If one that can take three people at a time can that be classified as a commercial one ? Sorry am asking a lot
excellent JOB! Doing a home version out of wood and unistrut soon like others have here on youtube. BTW, isnt that red bumper by your hook suppose to stop the hoist? Position it to max height, then install bumper so its against the hoop on the hoist (hoop=stop switch). Am I wrong here?
Your sir are tv host material 🙂👍
This was very entertaining to watch...
I wish I had one of these...
Thank you very much!
The joy of designing and building your own projects is priceless ..
thanks.
that plasma cutting system, awesome. Thanks for this video
👍
You're my freaking hero making it so awesome. Worth a subscribing
Thank you and welcome.
I’m rarely (as in: never!) called a hero....thanks Lou!
thanks for watching that far. You're awesome.
Great view of the Ferrari from the top ; ) That plasma cutter is the best...very jealous. Great vid and sense of humor/humour as always.
many thanks.
Very nicely done and a clever design. Don't underestimate your skills
thanks.
Great work, Lou … very well done!👍🏻😀
Thanks Mark.
I have a very similar shop with the same plasma table still haven't tried using the table or the new hypertherm xp45 someday I will figure it out! Great video thanks for sharing
Cheers. Thanks for watching.
You will like the XP45
This helped me a lot to built an affordable lift for my home. Thanks ..😄
you are most welcome. cheers.
Hey Lou, I liked the way you said, "Fantastic!" That was pretty funny. Great elevator design. Very pragmatic. Cheers!;)
thanks. cheers Lou!
Glad I could be your hero.
:)
I'm thinking a limit switch at the top and bottom would finish this thing off nicely so it always stops at the same spots. Just wire them in series with your up and down buttons up at the winch.
thanks, maybe eventually once I work out all the bugs.
So your not just a pretty face but an elevator mechanic also. Kudos to you. You like to keep your content mixed up and that is another reason to have subscribed
Lol. I guess I’m that too!!
Nice. I would have watched an hour long version of this.
ah, thank you! cheers.
Its brilliant well done
thanks!
Lou, that was pretty cool making that. Your very talented. Nice to see other projects on your channel besides the ferrari. Don't get me wrong, I do love that car. Looking forward to the next one.
thanks man, appreciate it.
Liked and subscribed! Love your welding bench. ;) Fun shop
thank you!!
Good design and economic
Thanks.
Looks great!!!!
Thanks!
That looks amazing
it works well!!
عبقري متمكن في صنعته
thank you!
Hahah. Watched till the end.😄😄
thanks!!
This is so me I’m getting plenty of ideas for my evil 😈 scientist lair
Lol. Thanks
Very nice design u made , but what about safety part if the winch cable breaks how are you going to save the free fall. Please share video for that too.
What capacity winch have you used.
I think if you two winches one up and one down both working in opposite directions then may be if one string breaks the other one would definitely save you.
Thanks. 1000lb capacity. No other videos planned right now but perhaps one day I will post an update video.
Don't worry, he's likely thought of everything, probably more than the CSA or ANSI could for elevating and overhead lifting devices.
Great project, thanks for sharing. Any chance you could provide a link to those casters on Amazon? Thanks!
A few people have asked and unfortunately the exact product is no longer available.
@@LouTrottier the ones you used have 2” wide wheels, right?
@@kevingearhardt5208 yes
great and inspiring, pls how do i get the most part of the component including the motor?
whatever I didn’t fabricate I got off Amazon.
Enjoying your videos, can u send me a link of those casters? Thanks in advance
www.amazon.ca/gp/product/B088667XFG/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Ok🤗🤗🤗
Cheers
My wife came down this morning and thought she caught me watching porn . I said no , I’m watching Lou !
Great job Lou ...
LOL, thanks!
good workmenship. But add atleast 2 fall arrester sir.
👍🏻
Great freakin job brother. Let’s start making some.STL files so we can 3D print.
LOLthanks, not sure about a plastic elevator though!!
@@LouTrottier No you said that you made some 3D printed tools.
@@first25q43 oh yes, you are correct.
@@LouTrottier I am thinking about making a garage. Attic lift using unistrut rails on the wall. I will have to build a wood base. Or bolt the tubing since I am not a welder.
@@first25q43 best of luck to you, can you get some pieces welded around you locally?
I like how you managed to get the word "girthy" into the video. You need to be very careful what you are referring to with a word like that...
I knew someone would comment, not surprised it was you pal.
Now, back to the Ferrari 😂
totally agree!
This is cool man I have liked this more. How much is involved if on once to do own at home
a home unit could be made much easier as it wouldn't have to carry as much weight i suppose.
@@LouTrottier I thank you very much Lou Trottier. If one that can take three people at a time can that be classified as a commercial one ? Sorry am asking a lot
@@reubenmalandu7490 I'm sure if you use it as a people mover it will need all kinds of certifications if used anywhere else outside your home.
@@LouTrottier thank you once again have a good day
Yeah Mon... I made it thus far...👍🏽
thanks for hanging in there. cheers Lou
My dad need a lift and cant afford the name brand makes do you make custom builds for private people my dad is a vet and we live un northern utah ?
sorry, it was a one off.
Safity ..down elevators conditions...children safe down elevators...how do you sensor
Sensor models and input output volt vac/VDC
sorry, i don't understand.
Ok sir recepect ...safity proximity children's...lift car down run conditions..sir
CiD
excellent JOB! Doing a home version out of wood and unistrut soon like others have here on youtube.
BTW, isnt that red bumper by your hook suppose to stop the hoist? Position it to max height, then install bumper so its against the hoop on the hoist (hoop=stop switch). Am I wrong here?
That is exactly what it is for a no I haven’t set it up yet. Someday. Cheers