He put a lot of work into making and designing that product. I wouldn't be offended if it never goes onto thingiverse. Ppl expecting everything for nothing. Pay the man for his work
Yo HOUND! There are '.50cal foam paintballs' that are the same diameter as nerf elite darts that are small enough you can load multiple of them in one shell. Thus making it a shotgun. You should really try it out!
Is that a sling attachment at the bottom of the front end of the barrel? I did not see that option on the Shellington site. If so, did you add yourself? Could you link me to where you got it?
@@HOUNDsArmory Thanks for replying! Did you eventually add a sling to it? If so, what was the other attachment point? I finally "pulled the trigger" (pun intended) and picked one up from their site. Your video really helped sell me on it. Now that you've had it in your armory for some time, any change in thoughts? I'm trying to do a cowboy load out with dual hammershots and looking for other things to help improve it. Do you have any recommendations for bandoliers since the one Shellington has on its site only works with Spring Thunder rounds? Keep up the great work!
@@arnelcano799 Of course I love talking to people in the community. That's so exciting you picked one up. I'm still very happy with the blaster still. I added another one of those hooks to the stock though it took some modifying of the files before I printed them. As far as bandoliers I haven't used any. There are some printable caddies for the shells that works well. I be leave anything that fits a shotgun shell of similar diameter (18mm) should work. I've seen lots of people on the discord using stock holders. I picked one up but found it was a little hard to get the shells out.
About how far are you from your targets? I'm super keen on getting a accurate and reliable 'western' rifle that can handle some combat. It looks awesome, and ill have to watch for it to go official so I can grab it up and bring it to nukelanta. :D
I'm about 20 yards from those targets. I took this to nukelanta and was very happy with how it preformed though I did have to change springs to meet the fps cap.
I saw this on the shellington website after watching this video. It was $200, do you have to have a 3d printer and stuff like that? Or does it come disassembled and you have to toss it together then you’re good? Thanks in advance to anybody that answers!
How long do the 3D prints take? I don’t have a 3D printer myself but my library can do 3D prints for free but has a 3 hour limit. Would it be possible to do separate parts over a few days with that time constraint?
@@HOUNDsArmory Ah ok, also I’m just thinking of just buying the thing outright instead of printing it so did you buy it or did your print it because if you bought it I have a question.
I'm still waiting for them to send me the files (ordered the hardware kit). You might really enjoy the Springthunder btw. Makes a huge mess of rival rounds and is so much fun to reload
I have had some trouble with that. Mostly because I printed my first batch in gray for a larp (to simulate steal cased amo) Now I only use bright orange shells and they are much easier to find. Any I miss usually get picked up during dart sweep.
![[REVIEW] Spring Thunder | SUPER COOL NERF SHOTGUN!](http://i.ytimg.com/vi/RFaQHbXZG6g/mqdefault.jpg)
Just ordered my hardware kit cant wait to build one!!!
mines coming in about a week, seriously hyped as fuck
It's so much fun!!
THE RIFLEMAN!
That intro though... that was smooth.
So cool 😎
Am i the only one, who always waiting them to flip it?)
There is a different designed lever that lets you flip it t2 style!
I love it! It's an amazing blaster! I have had the pleasure of using it and it's incredible! So much fun!
I just need to get mine together but adulting is getting in the way
give you self a good evening to do it. It's a fun build!
Groovy
This is Screaming to be reviewed by Judd the Aussie Nerf Cowboy.
Great review I will be watching to see when the files are available
I agree Judd needs to get his hands on one!
@@HOUNDsArmory i have the files just waiting for the hardware to show up it is comming
He put a lot of work into making and designing that product. I wouldn't be offended if it never goes onto thingiverse. Ppl expecting everything for nothing. Pay the man for his work
I don't mind the system that he has with the beta test were you get access to the files when you buy the hardware kit.
@@HOUNDsArmory sweet!
699 subs nice
Yo HOUND! There are '.50cal foam paintballs' that are the same diameter as nerf elite darts that are small enough you can load multiple of them in one shell. Thus making it a shotgun. You should really try it out!
I'll have to get my hands on some
I’ve bought one from shellington blasters now it’s released for roughly $200. Will it come preassembled?
I am not sure you should double check with shellington.
@@HOUNDsArmory ok. Thanks anyway
Bow down to the.... Bow down to the King
That intro was what got a like about me, holy shit
Is that a sling attachment at the bottom of the front end of the barrel? I did not see that option on the Shellington site. If so, did you add yourself? Could you link me to where you got it?
It is a frame hanging hook I found at lows. it works great as a sling swivel though it is not a perfect solution.
@@HOUNDsArmory Thanks for replying! Did you eventually add a sling to it? If so, what was the other attachment point?
I finally "pulled the trigger" (pun intended) and picked one up from their site. Your video really helped sell me on it. Now that you've had it in your armory for some time, any change in thoughts? I'm trying to do a cowboy load out with dual hammershots and looking for other things to help improve it. Do you have any recommendations for bandoliers since the one Shellington has on its site only works with Spring Thunder rounds?
Keep up the great work!
@@arnelcano799 Of course I love talking to people in the community.
That's so exciting you picked one up. I'm still very happy with the blaster still. I added another one of those hooks to the stock though it took some modifying of the files before I printed them.
As far as bandoliers I haven't used any. There are some printable caddies for the shells that works well. I be leave anything that fits a shotgun shell of similar diameter (18mm) should work. I've seen lots of people on the discord using stock holders. I picked one up but found it was a little hard to get the shells out.
Cool
Can I buy one of these?
Because these are so dope and cool
Do you want to commission one or just get your hands on a hard wear kit?
Absolutely beautiful
Looks like a much easier prime than a modified slingfire. Awesome video man!!
About how far are you from your targets? I'm super keen on getting a accurate and reliable 'western' rifle that can handle some combat. It looks awesome, and ill have to watch for it to go official so I can grab it up and bring it to nukelanta. :D
I'm about 20 yards from those targets. I took this to nukelanta and was very happy with how it preformed though I did have to change springs to meet the fps cap.
I thought it looked really familiar. :P
What spring did you end up using, for future reference?
@@zrac1731 I used a random (maybe nightfinder) spring and a deploy spring. I’m going to be looking a better solution though.
All shellington blasters are super accurate
I new here
I saw this on the shellington website after watching this video. It was $200, do you have to have a 3d printer and stuff like that? Or does it come disassembled and you have to toss it together then you’re good? Thanks in advance to anybody that answers!
I think you can get both the kits, which you print the blaster your self and assemble, and the full blaster which comes preassembled.
@@HOUNDsArmory ok thank you for the help! you just got a new sub 😊
@@ResetYourKid Thank you! If you need anymore help with this blaster please let me know.
HAIL TO THE KING
How long do the 3D prints take? I don’t have a 3D printer myself but my library can do 3D prints for free but has a 3 hour limit. Would it be possible to do separate parts over a few days with that time constraint?
Some of the larger parts took over 12 hours if not closer to 20 hours to print.
Question, can you remove the grid handle because I want it to look like (as close to) a real Winchester rifle.
There are a few different hand guards but you do need one of them to hold the barrel and magazine together.
@@HOUNDsArmory Thanks for the reply, so in you opinion what is the most realist hand guard?
@@mrfunni1858 i havent looked at the files enough to say. You could also tweak the design your self, obviously just for personal use though.
@@HOUNDsArmory Ah ok, also I’m just thinking of just buying the thing outright instead of printing it so did you buy it or did your print it because if you bought it I have a question.
@@mrfunni1858 I almost always print my blasters myself.
I'm still waiting for them to send me the files (ordered the hardware kit). You might really enjoy the Springthunder btw. Makes a huge mess of rival rounds and is so much fun to reload
Try emailing Gdop and see if he will send you the files.
Did you get the kit yet?
@@Dr.Dumbshit yes I did. Didnt finish building it yet tho
Where do you get the files?
@@tasteless_5915 you currently can only get the files when you buy a hardware kit.
It's so nice. Currently building my indra. Might have to do one of these.
In your experience have you ever had any trouble recovering shells once they've been ejected?
I have had some trouble with that. Mostly because I printed my first batch in gray for a larp (to simulate steal cased amo) Now I only use bright orange shells and they are much easier to find. Any I miss usually get picked up during dart sweep.
When this is fully out would you do this build as a commission? Also did you get the Box 3 and 4?
I would totally take a commission for one of these blasters! I only picked up the first box so far.
what the hell is this and how do i get it ?
link to shellington blasters in the description