How’s the power on that motor? It’s only got a 30mm stator so I think the torque and acceleration will be pretty low. It’s probably just e we pound for high speed but I don’t know how they are rating these for 2000-5000 watts at 72v. I am looking for big power motors so the 65mm stator LY motors look pretty good, huge phase wires on some of the versions they offer. But this motor is like 1/2 the price and maybe with 2 it will be enough. Let me know what you think. Thanks
Its not bad actually, my cousin is about 300lbs and he brought it up to 60 mph so far. Still getting comfortable with going fast lol but in speed 3, while cruising at lower speeds and he hits the throttle, you see the front end fully extend lol so i would say for the price its worth it.
@@johnsonkhew9277 thats the main thing im worries about with my build coming up. You will receive speed wobble on anything with small tires at high speed
Its still in my storage lol ive come to a realization that even if i finished it, it wouldnt have a place to ride it. Busy roads, shitty drivers, we dont even have a track on island anymore. I'll finish it one day, but right now these electric projects are quicker, easier, and require less thinking.
OK I understand it’s just, that build is a very unique one-of-a-kind. Personally, I think much cooler than just slapping in a 420 or up to a 700 off the shelf big engine, I think people would appreciate the build bc i’ve never seen a dirtbike engine of that size going to a minibike frame, thx for replying and keep putting out good content bro👍
Nice build bro can share the specs of motor hub volts and watts and controller as well TIA😉
Can you please share the links of what you used in the description? TIA
Where did u get the wheels set up?
where did you get that bag, and the stretch bracket
Where did you get the extension swingarm from bro ?
Nice build Jonny! May I know how many cm did you have to cut from the neck tube? Thanks!
@@kevincruz7290 thanks kevin! Idk how many cm i took off, but i know how many cm was left lol 5.5" or about 14cm.
Nice! I’ve been wondering how do you guys get batteries on Oahu? They make it so hard to get batteries shipped to Hawaii!
Naw the company just has to know the correct procedure to ship them, and we gotta pay the price too.
Hello, what is the height from the ground to the steering wheel?
know if the stock motor can handle 72v @ 10a? im going to try it I guess
Ive done 72v 30a line/90a phase to the stock motor lol ton of fun and tops out around 30ish lol watch out for one-way clutch, though. Fails easily.
I’m getting a motor for my fiido, do you still recommend this or are there better options you know? Thanks
Love it! You should do a FarDriver tuning video!
Thats a forbidden topic my friend 🤣
clean fiido, but whrd u get ur front light n back stem extender ?
Back stem extender? Headlight is from amazon
@@JonnyDuzzit its right below ur seat on the back
Can you post up some links to all the parts bro
How’s the power on that motor? It’s only got a 30mm stator so I think the torque and acceleration will be pretty low. It’s probably just e we pound for high speed but I don’t know how they are rating these for 2000-5000 watts at 72v.
I am looking for big power motors so the 65mm stator LY motors look pretty good, huge phase wires on some of the versions they offer.
But this motor is like 1/2 the price and maybe with 2 it will be enough. Let me know what you think. Thanks
Its not bad actually, my cousin is about 300lbs and he brought it up to 60 mph so far. Still getting comfortable with going fast lol but in speed 3, while cruising at lower speeds and he hits the throttle, you see the front end fully extend lol so i would say for the price its worth it.
The frame will break near the steering column 120%
Nope lol on q1s, not q1. Different bracing designs.
Can I get the details on the electronics and wheels?
Pretty sure I say it in the vid…
Hey man what swing arm was that you had on the Colman bike ???
It’s a Grom swing arm and rims
bro ,Have you ever experienced the front wheel swinging from side to side?
Not sure what you mean
Speed wobble?
Like speed wobbles , when I push the speed up .
@@johnsonkhew9277 thats the main thing im worries about with my build coming up. You will receive speed wobble on anything with small tires at high speed
Tyre chg to 3-8.00 + damper, same also
would you paint the rear extender?
The stretch? It is painted, hammered bronze.
@@JonnyDuzzit the extension arm? Looks grey to me.
@@JonnyDuzzit is the expanding of the hole needed? im installing one on a roadrunner tronic/ fiido q2
Whatever happened to the bt200x build?
Its still in my storage lol ive come to a realization that even if i finished it, it wouldnt have a place to ride it. Busy roads, shitty drivers, we dont even have a track on island anymore. I'll finish it one day, but right now these electric projects are quicker, easier, and require less thinking.
OK I understand it’s just, that build is a very unique one-of-a-kind. Personally, I think much cooler than just slapping in a 420 or up to a 700 off the shelf big engine, I think people would appreciate the build bc i’ve never seen a dirtbike engine of that size going to a minibike frame, thx for replying and keep putting out good content bro👍
Lets goooo.
Links ???
Hi maybe you should cut the fork for better look
What lol no
🥰🥰👍👍
🔥🔥🔥👏🏾
We go ride then’
LFG!