Carlos awesome tutorial great outcome I love it awesome for new comers and mobile detailers that do this on a daily base as always be safe God bless William from extreme optimum auto detailing pr
Initial insight would be a VERY strong recommendation to wear some type of respirator. It may not SEEM LIKE you're inhaling a lot of chemical, but the reality is if you're a detailer and atomizing products like this or even with a Tornador (another tool altogether) I would HIGHLY recommend you wear some personal protection gear.
Very nice work. Not a detailer but like doing my own vehicles. That is a very fine/neat application of the product and end result is just AWESOME. Question on the product, is it diluted before placing in container?
Thanks for the great idea bro. I just started a mobile detailing service in New Mexico and I’m looking for something that’ll make my job a little bit easier and faster.
I had one for minor work but no idea for detailing but I thought there not recommend for 1-6gal compressors, how is yours working with that 6gallon compressor???
@@serranosmobile Me and my boy watched one of your videos where you tells us how to regulate it and what psi to use for No over spray! Thank You definitely gunna set my son up, God Bless You and thank you for answering all our questions!!!
Carlos, a couple questions, the small spayer how do you fill it and with what and is it diluted? Also your biz are you running with a tax ID, or biz license?
Um sir I don't even know your channel, how can I give credit to something I have never seen. Many detailers out there using this method. You are not and im not the first one to use this method.
@@tee-fullcleaningmobiledeta2939 I don't see any patents or legal paperwork that claim that was your idea. In addition, don't be egoistic, it's not like companies are suing each other for bringing out new ceramic coatings each year. Can not steal someone's idea if it was not unique or revolutionary. Stop bashing on other people and live your life.
I will always love my go to product. At this time cost wise this superior is killing it. But I will keep playing with both. If I can dilute my Maguire's it will be my go to :)
Do you run that on your same air compressor as your vortex/Tornador gun? Do you have to go reset the pressure at your tank and bleed off pressure? Or do you have some kind of regulator at the detail tool that keeps the pressure low?
@@serranosmobile I finally grabbed one of these and gave it a try, and I must say I LOVE it. Easy to use, applies evenly with a great finish, and saves a TON of product over what I was doing with a spray bottle. Thanks for the great tip!
Hello sir, can you tell me how many gallons and cfm is your compressor? I have a 1 gallon ryobi and after 2 or 3 squeezes i lose pressure and excessive product goes everywhere
serranos mobile awesome thanks for your feed back I use the Honda eu so it’s pretty quiet. Out here in California sometime we get complaints for loud equipment in certain city’s.
I'm thinking about getting the same detail gun at Harbor freight, I've seen them, looks awesome man. I had a question. Do you think the 3 gallon air compressor is enough psi to use this or should I go with a 6gallon air compressor thats pushing over 110 psi? Any feedback would be appreciated brother
I’ll have to try this stuff. I have used Vinylex on my interiors and tires for 25 years. A little hard to find but totally worth it. Non greasy and lasts a really long time. Haven’t found anything better.... yet.
Amazon has it and you can find it on eBay. Sometimes higher end BMW or Mercedes dealerships parts departments will have it but really expensive there. Don’t get it confused with Lexol leather care, it’s made by them but Vinylex is strictly for rubber, vinyl and plastic.
No sir not at all, well in my judgment, I have been using this method for years. Depending product is what creates the over spray and also the psi plays a huge roll
i can see a lot of people that are going to copy this including me so basically now we have the tornado and now this whats next? covering car with wax with this and clear coat
The gun is cool but I feel like it's just cumbersome compared to spraying a mf, wiping on, then wiping off really quick. Worrying about the hose, setting up the gun's canister etc just doesn't seem worthwhile time wise. Also keep in mind, you're aerosolizing a chemical, and even though you're outside you will breathe that in, your health is number one brother. It is really cool though, looks fun too.
I just got that same gun the other day. Used it a couple of times for tires. Holy hell that will fog a three car garage with the doors open real fast. Just got two tires and wheel wells done and I couldn't take it lol. This must be for mobile people only. Not ones inside
@@serranosmobile first time around I did use cover all straight from the bottle. Then I switched it to hyper dressing at 3:1... Which looks really good on the tires. I might not have it set right. The pattern is set to wide, air flow all the way open at 50 PSI and not sure where the fluid one is at. Probably open.
@@serranosmobile my engine is very dirty and i wanted to use the muscle magic degreaser on my engine and when i was finish i wanted a nice shine on the engine cause they said to use wd40 i want to hear from a professional
@@serranosmobile everyone called me a idiot, I’m making more work cause it gets all over the windows lol 😂 it sprays clean! People are annoying man, good stuff and super nice on mud terrain tires!
bro be careful, this cover all dressing is solvent base, go to their website specifically says , do not use on engine bay , solvent base. now aqua gloss is water based .
th-cam.com/video/r8BUHnwyLls/w-d-xo.html - here is a video showing this same technique being used from 5 years ago, 2 years before you posted yours. Carlos didn't steal anything. This is common knowledge in detailing. Air + Product = Atomized.
th-cam.com/video/r8BUHnwyLls/w-d-xo.html - here is a video showing this same technique being used from 5 years ago, 2 years before you posted yours. Carlos didn't steal anything. This is common knowledge in detailing. Air + Product = Atomized.
How can it be stolen if you didn’t invent the product. We are in the detailing industry and it clearly says “Cover all” so why not try it on the interior!??. They way I see it he’s getting more hype about it is because he knows how to presents the product.HATER🤣🤣🤣
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
Carlos awesome tutorial great outcome I love it awesome for new comers and mobile detailers that do this on a daily base as always be safe God bless William from extreme optimum auto detailing pr
Just started my detailing business and your videos have been very helpful! Keep up the great work. Your tips are greatly appreciated 👍
Thank you so much
Carlos serrano, your spoiling me man. I went and picked the air detailing gun today. Tomorrow it's gonna b cover-all spray.
@@stevepettner3693 let me know what you think
@@serranosmobile, sure will bud.
Engine bays are the best with this tool! Glad you finally bought one! I’m sure it’s helping with your hand!
Big time bro
Thank you for this video. Great idea. I am going to have to play around with it. I'm still curious about the overspray.
Thanks Brotha. Thanks for the tip. Gonna use that idea with Carpro Perl
I literally just went and bought this after this video. I can’t wait to get it home and start dialing it in. This is an awesome idea👊🏽
Hey brotha what a great idea. I might check this out for our business
been thinking about getting one after watching Garry Dean’s video. His products are so easy, versatile and price effective.
Nice
Did you have to buy an adapter for the gun to connect to the compressor?
Yes
Recently purchased a new adapter that is compatible with 4 other fittings
Where can I get that adapter?
@@wilfredgomez2632 which one boss
Been doing this for a few years now works great especially for applying tire dressings
Yes :)
What tire dressing are you using through this?
@@serranosmobile oyes amigo lo diluyes o solo lo pones así directo a la pistola
@@luisr.m.9498 directo
@@serranosmobile sale gracias
Gracias Carlos. Excellent idea.
De nada
I appreciate your videos and you’re obviously very knowledgeable. My ask is can you do links to all the products?
Thanks for everything
Slowly getting better at posting links
Oreily carries the coverall
Harbor freight for the gun
Coverall isn't sold in gallons?
I don't see it on website
This is amazing! I use at least 1 can of Coverall a month. I’ll be heading to harbor freight very soon. Thank you.
Your welcome 🙏
Hey Carlos. Any homemade ideas for bug remover for vehicles. Love your chaanel
Dawn dish soap
@@serranosmobile thanks.
Great video. Just seeing about these sprayers but I appreciate you taking the time to video. Keep grinding.
Thank you so much 👏
Initial insight would be a VERY strong recommendation to wear some type of respirator. It may not SEEM LIKE you're inhaling a lot of chemical, but the reality is if you're a detailer and atomizing products like this or even with a Tornador (another tool altogether) I would HIGHLY recommend you wear some personal protection gear.
I agree. Wear a respiratory my man!! We want you to stay healthy!
Amazing! Another great informative video !
I’ve just started my detailing business and all your videos helped me so much bro!
God bless your journey 🙏
Very nice work. Not a detailer but like doing my own vehicles. That is a very fine/neat application of the product and end result is just AWESOME. Question on the product, is it diluted before placing in container?
Yes so this one is already diluted and ready to spray. If you wish to get less shine yes add more distilled water into the product
Thanks for the great idea bro. I just started a mobile detailing service in New Mexico and I’m looking for something that’ll make my job a little bit easier and faster.
This is the perfect 💡
Serrano, what’s a good size compressor for vortex, air dressing tires n engine ???? only need compressor those jobs
Rigid 4.5
I had one for minor work but no idea for detailing but I thought there not recommend for 1-6gal compressors, how is yours working with that 6gallon compressor???
Worked well now I have a rigid 4.5
@@serranosmobile Me and my boy watched one of your videos where you tells us how to regulate it and what psi to use for No over spray! Thank You definitely gunna set my son up, God Bless You and thank you for answering all our questions!!!
Did you have to thin it down any and if so to what ratio? Could you get the same results from an aitbrush?
No i just pour into canister its dilued already
Carlos, a couple questions, the small spayer how do you fill it and with what and is it diluted? Also your biz are you running with a tax ID, or biz license?
Tax ID sole proprietor, using aqua gloss 4:1 or anything water based
@@serranosmobile coo, appreciate it bro. Goodnight God bless
WOW BRO! You are a genius thanks for sharing with us your secret! Im gonna try on tires. i just bought a gallon size Cover all.
You will love it
@@serranosmobile You stole this idea off my page...I posted this years ago..You should at least give me credit
Um sir I don't even know your channel, how can I give credit to something I have never seen. Many detailers out there using this method. You are not and im not the first one to use this method.
@@tee-fullcleaningmobiledeta2939 I don't see any patents or legal paperwork that claim that was your idea. In addition, don't be egoistic, it's not like companies are suing each other for bringing out new ceramic coatings each year. Can not steal someone's idea if it was not unique or revolutionary. Stop bashing on other people and live your life.
Do you like it better than the Professional Line Meguiars Leather Cleaner/Conditioner you typically used?
I will always love my go to product. At this time cost wise this superior is killing it. But I will keep playing with both. If I can dilute my Maguire's it will be my go to :)
The finish I'm getting from this product is pretty good. Not oily nor shiny
Do you run that on your same air compressor as your vortex/Tornador gun? Do you have to go reset the pressure at your tank and bleed off pressure? Or do you have some kind of regulator at the detail tool that keeps the pressure low?
I lower the psi
Do you have to clean the gun after every use?....or when you have to clean it, what items do you need to do that?
I clean 1 a week. I usually use dawn dish soap work warm water. If not ill pour some glass cleaner to clean it
OK sounds great! Thank you! I'm doing my first interior job today. You and Detail Groove helped alot
@Marty Rodriguez let's goooooooo, have fun and i expect you to tell me hope your 1st interior went
@@serranosmobile you got it
Quick question...can you use it on tires
Do you dress tires with this method too? If so what dressing are you using?
I have, dressing is from Drive Auto Appearance
Just to b certain.. can it be used on leather interior?
Definitely
Good idea. Do you have to clean it between every use and/or when changing to different products? How hard it is to clean it out?
After use I clean it fill with water close the lid and push trigger to flow out products. After every product I would reccomend to flush out
@@serranosmobile I finally grabbed one of these and gave it a try, and I must say I LOVE it. Easy to use, applies evenly with a great finish, and saves a TON of product over what I was doing with a spray bottle. Thanks for the great tip!
Thats awesome!!! God bless!!! Thank you for the opportunity
Just bought one. Definitely gotta turn down the PSI lol it’s spraying so much. Spreads like smoke.
@CLEFAN18 that's correct I now use a better gun
Awsome Thnks for the knowledge
Thank you
Hello sir, can you tell me how many gallons and cfm is your compressor? I have a 1 gallon ryobi and after 2 or 3 squeezes i lose pressure and excessive product goes everywhere
I have the 4 gallon rigid
4.5 cfm
@@serranosmobile ok then I'm definitely going to upgrade. Thank you
Your welcome
Pretty cool!
Thank you
What kind of air compressor do u recommend for this application?
I have a 6 gallon air compressor rigid
How is the noise level on that one. I do mobile so trying to find one not so loud?
@@melhaliburton9713 with my generator on I guess i dont here it but there is some low noise ones. The generator I use is the 8750 predator
serranos mobile awesome thanks for your feed back I use the Honda eu so it’s pretty quiet. Out here in California sometime we get complaints for loud equipment in certain city’s.
I here you on that
Could you make another video using doing tire shine and what size air compressors
I sure will
serranos mobile thanks
U can get the gallon the aqua gloss same product just concentrated
That's correct I have a gallon 🔥
What chemical do you use with the sprayer again? Thank You
Drive auto appearance lux cockpit conditioner
What products are you running through this for interior? Tires? Engine bays?
Aqua gloss
Is this Cover All high gloss, semi gloss, california version, or aqua gloss?
California version
I'm thinking about getting the same detail gun at Harbor freight, I've seen them, looks awesome man. I had a question. Do you think the 3 gallon air compressor is enough psi to use this or should I go with a 6gallon air compressor thats pushing over 110 psi? Any feedback would be appreciated brother
I say get the rigid 4.5
@@serranosmobile ok sounds good. Thanks brother for the response! 👍🏽
I would think with a low price you would have multiple spray guns with different products to change them out quickly
Definitely a great idea
Did u put it in the spray gun str8 or did u dilute it b4 u put it in the spray gun?
straight out the bottle. out the bottle you at 1:1 dilution
@@serranosmobile oh ok so its already at 1:1 dilution out the bottle ? An ready to use ?
Great video , can you post name of the spray gun from haebor freight ? Thanks
4oz detail gun
is that aqua gloss?
I honestly think it is. Maybe tweaked a bit
It is, just in a consumer packaging. I just watched a video Superior put out about it.
This is one yes but you can also order the gallon of aquagloss
Hi question whats the psi your using to spray the interior
35
Thank you so much i do love how you explain you work so now you have a new follower thank you so much
Thank you 🙏🏻
What’s your dilution when using it on interior?
4:1
do you clean the gun after using it or can you keep reusing it?
I clean after day ends
Hot water
@@serranosmobile thank you sir!
Could just roll down the window all the way if you are worried about overspray.
Thats correct 🙏
The Cover All is the Aqua Gloss correct?
Yes sir 👏
@@serranosmobile Thanks for the speedy reply. You've help me out alot. That Serrano's Sauce is the truth! lol
Thank you 👏
Is this the same as Aquagloss?
Yes just diluted for consumers
@@serranosmobile thanks
Can i use 303 in the air spray gun?
yes
How long does cover all lasts?
I think a good 2 weeks
Are you useing a new product for 2022 or are you still useing this cover all ?????
Still using it I don't switch often
Great video... and info. Bro.. saludos good keep blessed your channel , detail and family... can way to see you on naranga color
Thank you brother
I’ll have to try this stuff.
I have used Vinylex on my interiors and tires for 25 years.
A little hard to find but totally worth it.
Non greasy and lasts a really long time.
Haven’t found anything better.... yet.
Where do you order it from
Amazon has it and you can find it on eBay.
Sometimes higher end BMW or Mercedes dealerships parts departments will have it but really expensive there.
Don’t get it confused with Lexol leather care, it’s made by them but Vinylex is strictly for rubber, vinyl and plastic.
Ese mismo líquido trabaja como tire shine o ocupa uno diferente ?
Tire shine tambien
@@serranosmobile gracias
@@serranosmobile trabaja mejor que el aqua-gloss
i got a 24 litre compressor , would this be ok and would i need a regulator bud?
I think you should be fine
@@serranosmobile thanks bud ... i need a 0.8mm one ?
Do u dilute with water
This one is already diluted, the gallon is not and you will need to dilute
@@serranosmobile i swear ure the only detailer that answers so quickly.
Lol I have phone 24/7
i struggle to get the cap off what do you use
Nothing I just force it off 🤣
@@serranosmobile that shit be hard sometimes 😂
@@SoyChukii bro yes🤣
*$ALUTE BRO KEEP KILLING IT MUCH SUCCESS N KEEP WINNING ANY UPDATE ON THE 24X18 MOBILE DETAILING SIGN YET?*
No update yet 😭😭😭
Email me @ cserrano95@gmail.com
Won't the over spray get all over the paint and have a blotchy look
No sir not at all, well in my judgment, I have been using this method for years. Depending product is what creates the over spray and also the psi plays a huge roll
Too dope bro👍
🙏🙏🙏
i can see a lot of people that are going to copy this including me so basically now we have the tornado and now this whats next? covering car with wax with this and clear coat
Ooooh not bad a idea
Great video
Thank you bro
Do you dilute?
You definitely can
Using 3/8 air hose?
No clue but I think it is
Need one in my life 😅😜
hurry
for sure...937Clean is always looking to take my game to the next level. Good post
🙏🏻
Great video! how much coverall do you put in sprayer and how long does it last? Can you put other detail sprays in there?
I filled it up with product and very little is used. Yes you can water based only
Do you always his vehicle door sills with that detail gun and drag the hose across the front bumper when you detail an engine? LOLOLOL Fired.
Yes fired 🤣🤣🤣
Good stuff
Thank you 🙏
You have a great spirit , keep that up it's a rarity these days
Thank you 👏
@@serranosmobile *WHAT SIZE COMPRESSOR DO U HAVE BRO?*
@@GRISTLEPodcast 6 gallon
Dang this is cool
Very
The gun is cool but I feel like it's just cumbersome compared to spraying a mf, wiping on, then wiping off really quick. Worrying about the hose, setting up the gun's canister etc just doesn't seem worthwhile time wise. Also keep in mind, you're aerosolizing a chemical, and even though you're outside you will breathe that in, your health is number one brother. It is really cool though, looks fun too.
love the feedback, and yes to some its more of a hassle and thats totally understandable
GOD BLESS BRO!
Thank you for this amazing tip
God bless you, hope you enjoy it i know I do :)
@@serranosmobile I'm starting with the cover all tire care 1st if I like that then I'll go to the interior products
@@baircichlids5350 o nice if you ever use coverall in the detail gun it creates a lot if smoke or overspray as some call it
@@serranosmobile Yeah that's definitely stepping up your game Question what about the dash when you get close to the windshield
@@baircichlids5350 I spray unto a microfiber towel and apply
I just got that same gun the other day. Used it a couple of times for tires. Holy hell that will fog a three car garage with the doors open real fast. Just got two tires and wheel wells done and I couldn't take it lol. This must be for mobile people only. Not ones inside
U use aquagloss?
@@serranosmobile first time around I did use cover all straight from the bottle. Then I switched it to hyper dressing at 3:1... Which looks really good on the tires.
I might not have it set right. The pattern is set to wide, air flow all the way open at 50 PSI and not sure where the fluid one is at. Probably open.
more fish eye lense videos! it looks great
🙏
can i spray that shine on my engine bay after i clean it
Yes
@@serranosmobile my engine is very dirty and i wanted to use the muscle magic degreaser on my engine and when i was finish i wanted a nice shine on the engine cause they said to use wd40 i want to hear from a professional
Use muscle magic then dry engine then dress it you will be fine
@@serranosmobile what is that you're spraying on your door
Aquagloss
Man I posted this on detailing for money and everyone was talking crap to me lol but it works perfect
O trust me I was hanged 🤣🤣🤣
@@serranosmobile everyone called me a idiot, I’m making more work cause it gets all over the windows lol 😂 it sprays clean! People are annoying man, good stuff and super nice on mud terrain tires!
Preach it 🙌
Hola Buenas Tardes Que Modelo Es la pistola de usted DoNDE pUEDO Comprar una Que tenga un Buen dia usted
Es de harbor freight
You can make a drinking game out of this video. Take a shot anytime he says "uh"
Haha yes
Uh msorry 🤣🤣🤣💀
Very cool idea though man! I'll give it a try
@@mofojones2758 yes for sure boss
Man! I gotta look into that! That means I gotta get an air compressor 😫
You should!
@@nopeboat5383 rigid 6 gallon
bro be careful, this cover all dressing is solvent base, go to their website specifically says , do not use on engine bay , solvent base. now aqua gloss is water based .
Do you apply primer first? 🤔 Haha jk yeah this is a much faster method
🤣🤣🤣☠
Que es lo que le pones adentro?
Aqua gloss interior dressing
Sorry bro that cover all. The vid was running while my daughter called me so I started it late, so I restated the video.
Do you know if the Cover Allis safe on leather and dashes?
I use it on them. 0 issues till this day
@@serranosmobilethank you my friend
I am new to these products. Can you tell the differend between Cover All and Aqua Gloss please?
@@charlespropes1340 coverall in this video is their consumer product, aquagloss is their fully conncentrsted conditioner
@@serranosmobileso are they basically the same?
There's a sucker born every minute. I'm sure he probably saw this on Tiktok..lol
U never know 🤣
Whole set up is a mess. Also looks like you did nothing to that door because your lighting is horrible due to your location (outside)
Thank you so much 🙏🙏
Yes working outside is tough 🤣🤣🤣 saving up for a bad ass camera. Any one you recommend
I tuned in to this tube for information on Superior Dressing and you went onto something else from harbor freight. . Feel I wasted my time. Sorry.
no worries thank you for watching
😂😂😂😂 what a gimmick, smfh...
You can get the same results by spraying the rag and whipping things down, all while saving on product...
Let's goooo thank you for the feedback 🙏🏻 this helps others as well. So thank you 🙏🏻🙏🏻
Damn bro you stole my idea
th-cam.com/video/r8BUHnwyLls/w-d-xo.html - here is a video showing this same technique being used from 5 years ago, 2 years before you posted yours. Carlos didn't steal anything. This is common knowledge in detailing. Air + Product = Atomized.
Nooooooo🤦🏻♂️🤣
Yes🤣🤣🤣🤣🤣
You Absolutely stole my idea...you even use the same gun I used
Dane im sorry sir 😳
Its an amazing tool thats why I have used this for quite some time
th-cam.com/video/r8BUHnwyLls/w-d-xo.html - here is a video showing this same technique being used from 5 years ago, 2 years before you posted yours. Carlos didn't steal anything. This is common knowledge in detailing. Air + Product = Atomized.
How can it be stolen if you didn’t invent the product. We are in the detailing industry and it clearly says “Cover all” so why not try it on the interior!??. They way I see it he’s getting more hype about it is because he knows how to presents the product.HATER🤣🤣🤣
@@nickrobles7858 stole my idea....if you saw someone do it before just tag that person and give them credit.
First
Thank you boss
Terrible finish, looks greasy and worse than before!
Let's gooooo love the feedback 🙏🏻 thank you for being here
What a waste
Thank you for your feedback 💪🏾💪🏾💪🏾🙏🏼🙏🏼