LOGIC PRO: VEP AU3 1 Instance - MIDI Ports with 16Ch

[@yaoguangtang1759]

Very thanks! Finally,I could use multi-ports for VEPRO in LOGIC.

[@JenyaShteinbergComposer]

Thank you so much! It helped me a lot.

[@norvintu-wang9047]

thank you! didnt know AU3 is working for logic (not full support as i can tell it only can run up to 127 channel per instance, but still better than 16 channel per instance in AU2 haha:) thanks for sharing

[@musicchoi8752]

Thank you for very helpful video. Can I ask one Question? In my Logic Pro, there are only 8 midi ports. How can I change this to 16 or 48? Thank you. Regards

[@virtualorchestration]

Of course you can go up to 48 ports. First of all in Vienna Ensemble Pro go into the preferences and set the MIDI ports up to 48.
Then in Logic Pro open the Vienna Ensembel Pro AU3 plugin and on the right top corner, click on the wheel and there set the 48 MIDI ports again. Close and reopen the plugin, now you have 48 MIDI ports
www.vsl.info/en/manuals/vep7/vep-plugin

[@musicchoi8752]

@@virtualorchestration Thank you. Thank you very much!
I've tryied to find how to do this for this week.
Now I think I need to look for one more thing, multi timbral independent volume control and automation! I'll find it!
Thank you and have a good day!

[@hovhannisyanprod9024]

Hell My Friend
How does the routing work? Can you perhaps make a short video about it?
I have 1 instance with let's say 8 ports. I don't need more per instance
But how is this properly routed in logic in the mixer so that when I use the various instruments that I have loaded in Vienna, I can also send them individually in logic in the mixer tracks when playing as channels so that I can also send a bus on each individual track or can load a plugin or an EQ
whatever
At the moment everything is coming out of one track for me and that's really stupid
Is there a solution for this and how do you do it?
Thank you very much for your answer

[@virtualorchestration]

Hello, watch th-cam.com/video/OV7lIxDRhfs/w-d-xo.html

[@GiulioPirondiniMusic]

AU3 is phenomenal! Actually it WAS. On my old MacPro 2010 everything worked just fine.
But then I’ve switched from Intel to M1 .
AU3 doesn’t work anymore with logic on M1 Silicon Mac (Logic will stuck searching plugin at start)!
Be aware!!

[@fabio_composer9768]

ciao , io ho un problema con il plug in au3 quando lavoro in LOCAL sul MAC e non capisco come mai . quando uso in LOCAL la VEP (MAC) e carico AU3 in logic ,non trasmette nessun segnale, nessun suono, mentre il plug in vienna ensemble pro funziona benissimo . se carico sempre AU3 e la VEP la faccio girare su un PC WIN esterno funziona . non capisco , cosa mi sfugge ? sbaglio qualcosa ?

[@virtualorchestration]

Salve Fabio, hai configurato in questo modo il Channel Strip in Logic Pro? www.vsl.info/en/manuals/vep7/notes-for-logic-users

[@fabio_composer9768]

@@virtualorchestration si ma continua a non funzionare , non arriva alcun impulso da logic verso la VEP con au3 . con il plug in vienna ensemble pro si invece .

[@CristianoAlberghini]

@@fabio_composer9768 Se hai configurato o come nel mio video o come da manuale VEP e non va, prova a scrivere a VSL. Devo comunque aggiungere che il modo più sicuro di non perdere eventi MIDI con Logic Pro e VEP è usare il Plugin VEP collegato ad 1 istanza con massimo 16 Canali MIDI e avanti così per ogni gruppo di 16 Canali MIDI. Questo però comporta che bisogna aprire più istanze VEP e quante aprirne dipende dalle risorse del Computer.

[@fabio_composer9768]

@@CristianoAlberghini ok grazie , ho scritto a VSL.vediamo cosa mi rispondono . la cosa che mi risulta molto strana è che se carico la VEP su un pc slave funziona tutto benissimo . se invece la uso in locale sul mac non funziona . questo mi sta facendo impazzire :)

[@virtualorchestration]

@@fabio_composer9768 Forse dipende dalla configurazione della rete.. dovrei vedere per capire meglio.. intanto attendiamo risposta da VSL

[@bhavearth]

with this technique i guess in logic mixer can't we create the individual tracks so that we adjust each volume and dynamic expression

[@CristianoAlberghini]

Yes, to have audio channel strips you have to create them by associating the audio outputs of Vienna Ensemble Pro with each channel strip in Logic

[@DallasCrane]

How do you get Logic to show MIDI ports in track options in later versions?

[@virtualorchestration]

Hi, I have Logic Pro 10.7.4 version and following the same procedure as in the Video, as soon as I insert the VEP Pro AU3 Plugin, on the left (Track: Inst 1), the Midi IN and OUT Ports and Channels automatically appear.
If you want to send me some photos to better understand the problem, please write me at [e-mail]

[@paulcristo]

What type of computer was used for this demo?

[@virtualorchestration]

Mac Pro 2019 - 3,2 GHz Intel Xeon W 16 core - RAM 96 GB 2933 MHz DDR4 - AMD Radeon Pro 580X 8 GB, I imported the MIDI from a programming I did with Cubase Pro several years ago on a Mac Pro 2013 - 8 Core 3,0 Ghz Xeon E5 - RAM 64 GB 1866Mhz (VSL libraries)

[@daviddln1987]

Thank you! How many ports can we use per instance?

[@virtualorchestration]

4 to 8 ports, but in Logic sometimes the note off is not sent correctly (I use only 1 instance)

[@daviddln1987]

@@virtualorchestration Thank you.