I am very familiar with shredder principles which I have learned from technical papers written by the mechanical engineers at Newell Industries Inc. who was one of the pioneers of the car shredder in the 1950s. Sharpened cutters must be made from "tool steel" which is hardened and ground to a knife edge. However this metal is brittle and it can be damaged by severe impact (the change in pressure divided by time). Even when running at low speeds, shredding thick steel items like cars can approach the impact limit of tool steel and the sharp edges would be chipped and broken off. The entire cutter wheel could be subject to fracture. However manganese steel is not pre-hardened and remains rather plastic except for the surfaces that come in contact with the material being shredded and this pressure produces localized hardening commonly known as "work hardening". As the hardened surface wears away, new metal is exposed and the work hardening process repeats. manganese steel shredders can tolerate a lot of wear before needing replacement. That's why you will notice that the cutter wheels in the shredder in this video are worn down but still useable. Also, cars that have gone through the "pre-shredder" still must be finally processed by a high speed hammermill which is all manganese steel.
Think of the amount of energy it takes through the entire process of recycling a car back into just molten steel ready to pour. its way more than just digging up raw ore and processing it did in the first place.
I can see the flaws with this type of shredder- you see how steel cable gets wrapped on the teeth? The double roller shredders are self cleaning. Also- the steel used on this one has worn badly. Rounded it. The best is the one youtube that eats it ALL - engine blocks included.
You know, i saw that. The cables/ wires, wrapped around it. So i thought to myself and said; Self, how do they get those cables/ wires off of those big ass rollers? And myself said; hmmmm? Dont really know? But i'll be damned if i would go in there with a torch and burn em or grind em off! And myself said back to me; damn right! Dont want that shit poppin off wrapping around my arm or flyin into my face! And myself said back; {HELLZ YEAH!} BAG DAT...
You are not a shredder expert. But there are some issues with all shredders. But the panning ripsteel design is well recognized as the design to do this task. And hold up well..but when you become a shredder expert your comments can be considered..
How would anyone literally feel if I were to get into a mini-van or panel van, put my cloth and disposable diapers in there with me while I was wearing nothing but disposable diapers? Would I be allowed to be crushed and then pre-shredded in the crushed mini van? I am asking due to "death with dignity" and if I actually can to that yard could I get into a vehicle?
We build this pre shredder under the panning patent of 1958 and our ripsteel design for under 1 million..sales@shredderhotline.com where we build shredders since 1966
very good video. very clear intonation, good camera shots and an amazing strong shredder!!
They should have another shredder under this one to make the big chunks into small chunks.
Sir,Know more information in Whatsapp:+ 86 15107149073
Imagine how well it would work with sharp cutters.
Those cutters look like manganese castings which are "work hardened", but they won't will not maintain a sharp edge.
I am very familiar with shredder principles which I have learned from technical papers written by the mechanical engineers at Newell Industries Inc. who was one of the pioneers of the car shredder in the 1950s.
Sharpened cutters must be made from "tool steel" which is hardened and ground to a knife edge. However this metal is brittle and it can be damaged by severe impact (the change in pressure divided by time).
Even when running at low speeds, shredding thick steel items like cars can approach the impact limit of tool steel and the sharp edges would be chipped and broken off. The entire cutter wheel could be subject to fracture.
However manganese steel is not pre-hardened and remains rather plastic except for the surfaces that come in contact with the material being shredded and this pressure produces localized hardening commonly known as "work hardening".
As the hardened surface wears away, new metal is exposed and the work hardening process repeats. manganese steel shredders can tolerate a lot of wear before needing replacement. That's why you will notice that the cutter wheels in the shredder in this video are worn down but still useable.
Also, cars that have gone through the "pre-shredder" still must be finally processed by a high speed hammermill which is all manganese steel.
that beat dope asf mane.
Do you care what's inside the vehicles when you put them into the shredder?
Think of the amount of energy it takes through the entire process of recycling a car back into just molten steel ready to pour. its way more than just digging up raw ore and processing it did in the first place.
It really isn't.
I can see the flaws with this type of shredder- you see how steel cable gets wrapped on the teeth? The double roller shredders are self cleaning. Also- the steel used on this one has worn badly. Rounded it.
The best is the one youtube that eats it ALL - engine blocks included.
You know, i saw that. The cables/ wires, wrapped around it. So i thought to myself and said; Self, how do they get those cables/ wires off of those big ass rollers? And myself said; hmmmm? Dont really know? But i'll be damned if i would go in there with a torch and burn em or grind em off! And myself said back to me; damn right! Dont want that shit poppin off wrapping around my arm or flyin into my face! And myself said back; {HELLZ YEAH!} BAG DAT...
@@robwilsn3219 lol. Yep..makes you wonder how much less metal is processed because of inferior machines. Time is money!
You are not a shredder expert. But there are some issues with all shredders. But the panning ripsteel design is well recognized as the design to do this task. And hold up well..but when you become a shredder expert your comments can be considered..
Love to see this....
should be, "Erecto, we have a hard on for recycling"
I want to be inside one of those cars with 30 packs of disposable diapers, wearing only my diaper!
Why not put them through a roller complete after depoluting then shred them
Sir,Know more information in Whatsapp:+ 86 15107149073
2:53 - Lada Samara
2:49 - Lada Nova
Can you provide full details of pre shredder with cost and contact details too.
On yashwantsurve01@gmail.com
1:40 - Nissan Sunny 1987
Отлично я бы туда работать пошол
How would anyone literally feel if I were to get into a mini-van or panel van, put my cloth and disposable diapers in there with me while I was wearing nothing but disposable diapers? Would I be allowed to be crushed and then pre-shredded in the crushed mini van? I am asking due to "death with dignity" and if I actually can to that yard could I get into a vehicle?
2:48 ваз 2105-2107
2:53 это девятка
Gde mogu da kupim takvu seckalicu
Sir,Know more information in Whatsapp:+ 86 15107149073
1:04 - Renault 11!!
Nice. ♡ T.E.N.
We build this pre shredder under the panning patent of 1958 and our ripsteel design for under 1 million..sales@shredderhotline.com where we build shredders since 1966
An old Opel Ascona?????? A classic which people look after and want to have it??? Unbelievable what you did!!!! 😡
Quality made in Kassel, Germany