I have been dabbling home brewing for a year or 2 now. I just discovered you on TH-cam. Your videos are phenomenal!! So glad I found them. Thanks for the hard work!
All thriller - no filler! Appreciate the clear and concise directions! All these other guys get sidetracked into the minutia like they're explaining how black holes work. Thanks!
Tip: Stick the bottles you want to peel the labels off in a bucket of water for 4 to 5 days and the peel will just slide off. To keep it in the bucket submerged, fill the bottles with water. No more elbow grease!
You seem like a cool guy! Don't know why I have never seen your videos. Deffinatley subscribed!! You'd be good on radio, I think you have the voice for it!
I soak bottles in a solution of water and oxyclean. After the empties soak a bit, they peel right off easily. Thanks for the ideas. I have some to start bottling as soon as I finish blowing leaves.
this video was so helpful thank you so much. I've been searching youtube for bottling info and had a hard time. how can i i bottle without the cork and use a cap instead? i hope you see this. thank you in advance.
Charles, this was a good video. I have a tip for labels though. If you are reusing your bottles and want to have labels nicer than tape and marker, you can print them out on regular copy paper. Cut them to shape, then wipe down the back of the label with milk (cows milk... whole, 2%, skim; grade doesn't matter but it must be cows milk) then apply the label to the bottle. The lactose will hold it in place until it gets wet then it will slide right off. Very easy to clean up for reuse and no need to stock special label sheets. Cheers, mate!
tri goof off for removing labels a small bottle does a lot of labels move tape sticky stuff, gum.... but OK I ended up saving a few of these now after I subscribed and watched a lot of them and again I'm gonna thank you💜💜
Just personal preference. All of my bottles are used bottles. Now, that I make more than I drink, I'll probably have to order 3-4 dozen new ones soon, it's starting to hold up production..
I made some wine from wild grapes. It tastes ok but I don't think I let it ferment long enough . I put it into the fridge after racking. Is it position to take it out the fridge so it can continue fermenting for more time or is the yeast dead?
I want to bottle & cork some traditional Mead. I am doing 1 Gallon batches I want to test 1 bottle in a couple of months and test another in a year and I want to do a long term aging on the other 2 bottles. I hear that I need to keep the cork moist when storing and corks are only good for about 5 years. How do I choose a long term storage cork and is it best to store the bottle up right or on it's side?
Hi, I really enjoy your videos, based on your experience is the style corker you recommend for beginners or are there any others that you would also suggest? Thanks in advance and keep up the good work.
Depends on how many bottles you're planning to cork at one time. The hand corker is fine for the 1-gallon (5 bottles) batches. If you are making 5-6 gallon batches (25-30 bottles) then it will probably be an easier time of it to use a floor standing type like this: amzn.to/3dxhjV6
@@DIYFermentation thanks for your reply. I've seen reviews which said that a similar style two lever corker damaged or caused an indent to the top of the cork, have you ever experienced anything like that?
Im trying to reuse a case of screw top lid wine bottles. Can i cork them for short term personal use? Or should i reuse the screw top lid with a new gasket? Any info helps thank you in advance
The shape of the bottle has no effect on the wine. The color of the bottle may have an effect on the wine in bright environments, but since my bottles are stored in a relative dark location color (or lack thereof) is not an issue.
Ther's no set time. When the wine appears clear and there's no sediment at the bottom of the carboy, and hydrometer reading remain unchanged after taking readings several days aoart.
For some natural cork you need to sanitize them in a 1% metasulphite solution, then soak in warm water for 5-10 minutes. It really depends the corks you buy, so always read the instructions specific to those corks.
Did you add potassium metabisulfite and potassium sorbate to your batch before the video cause I see you did not put a pinch of metabisulfite in before capping
The wine bottles are recycled bottles shelf wine bottles from Walmart. They used to cost $2.48 and I used the wine for cooking. They now cost $2.98 and I now use a much better quality of wine for cooking.
Hello! I'm having trouble figuring out how to get 6 labels on one page like you have. It seems I can't duplicate a wine template design on Canva. How do you get all those labels one one page? Thanks!
I'm sorry to hear about your issues, however you may wish to contact Canva support concerning their wine labels. Other than illustrating that it is possible to produce wine labels, word processing configuration is not a area that this channel will support.
What I do is after thoroughly degassing, I immediately bottle and place a large cap or other cover over the bottle to let any remaining gas rise out, after a couple of hours usually overnite, I will then cork the bottles. After watching the corks for movement for another day, I'll usually then label, and cap the bottles and put them away for aging.
I think I'll stick with screw-tops. 😀 I found a solution to labels that don't want to come off, Avery have a range called 'Removable Labels', they work well, perhaps a little thicker than normal, they don't tear easily when you peel them off.
Great video. New to DIY wine making but feel like your videos are gonna be really useful. Quick question. When racking the wine a few days ago I transferred it from a carboy to a large bucket (all sterilised) however I poured the wine in to the bucket. Have I ruined it? It’s going to be everyone’s Christmas present so I’m really hoping not 😬. Thanks for the video
If you were doing your initial rack from primary to secondary, and this was within the 3 to 5 day period, then you be ok. If you are using campden tablets, then you might want to use that to help reduce oxidation. If this was a later racking, then there's the possibility that the degassing that would occurred during the pour may have displaced enough oxygen in the bucket (co2 being heavier than air). Add campden tablet(s) to be sure and hope for the best.
The best method of clearing your wine is time. Although it will not be covered on this channel bentonite is probably the most widely used substance for clearing wine.
Time is best and budget friendly of course, but If you want to clear it sooner then nature allows try Ritchies Kwik Clear. I always have a stash of this around and will work in 24 hours to great effect.
They still have them on Amazon: www.amazon.com/Home-Portugese-Double-Level-Corker/dp/B000FRWJNE/ref=sr_1_2?crid=16O446677LDWR&dchild=1&keywords=wine+bottle+corker&qid=1603595307&sprefix=wine+bottle+cor%2Caps%2C178&sr=8-2
In the case of that banana wine only twice times. From primary to secondary, and once before bottling. Normally my wines 3 or 4 rackings and plenty of time.
DIY Fermentation thank you 😊 making the cherry wine - I watched how you are back sweetening it, I will as well. I will keep this in mind and keep reminding myself to have PATIENCE 😂
Just thought I'd mention that, in my opinion, the easiest way to remove a label from a wine bottle is to soak the bottle in water that has had some baking soda dissolved in it. Let it soak for about half an hour and the label peels right off.
Mouthwash, or a shot of distilled spirits (I'm partial to scotch myself), should help with that. Pouring it in all by guarantees you oxidizing the wine. Additionally, I pasteurize my wines/meads now to further reduce any bacteria.
@@DIYFermentation and some wine making supplies are really difficult to find. Such as bentonite, dualfine, campden, hydrometer for wine, wine yeast, Crocker, enzyme etc…
This video is pretty informative and you really make it feel like a dad is teaching me how to do these things 😂.
You are a natural born teacher. Thanks for explaining everything very, very clearly!!!
Your videos are the clearest and the easiest to follow! Thank you for simplifying the process for me!
Thank you for watching.
and his voice is a pleasure to listen to.
I have been dabbling home brewing for a year or 2 now. I just discovered you on TH-cam. Your videos are phenomenal!! So glad I found them. Thanks for the hard work!
this dude is my kind of frugal. love it.
All thriller - no filler! Appreciate the clear and concise directions! All these other guys get sidetracked into the minutia like they're explaining how black holes work. Thanks!
I explain it like the novice that I am.
You seem to be a humble kind of man have fun drinking your wine sir
Thank you very much.
Such helpful videos, with great ideas. That finished product looks so classy and professional. Pretty amazing!
Thanks so much! More to come.
I really enjoy your videos because they are so much more "my speed" than others
Thank you. That's the whole point to my videos.
I'm now at this bottling stage and this video explains the process clearly! Thanks a million!
Glad it helped!
I'm enjoying these videos very much. Such a charming man and he's got some class but isn't a snob. Well balanced presentations 👍
Glad you like them, and thank you for watching
Tip: Stick the bottles you want to peel the labels off in a bucket of water for 4 to 5 days and the peel will just slide off. To keep it in the bucket submerged, fill the bottles with water. No more elbow grease!
Subscribing because I really enjoy your personality.
I just want to say thank you for helping us how to bottle wine and cork it.
Excellent video with full explanation
Glad it was helpful!
got yourself a new subscriber, i usually watch CS mead and more, but i found yours first. have a good day!
Well if I'm up against CS Mead, I better up my game a bit. Thanks for subscribing.
@@DIYFermentation you must be doing it right. I see 5 of your videos to 1 from CS Mead and More in my recommendations!
You seem like a cool guy! Don't know why I have never seen your videos. Deffinatley subscribed!!
You'd be good on radio, I think you have the voice for it!
Thank you for watching.
Thanks!
Thank you for the donation.
Great video! I bought the bottling wand last year with the pressure button for filling bottles. It's a life changer!
Totally agree!
I soak bottles in a solution of water and oxyclean. After the empties soak a bit, they peel right off easily.
Thanks for the ideas. I have some to start bottling as soon as I finish blowing leaves.
I might try that. Thanks.
Great video! Your vid really helped me understand the tools and the process.
Thank you for posting.
Thank you for watching. Once you understand the basics here on this channel, other more advanced channels can take it from there.
Good job keeping it simple, to the point and always keeping this hobby affordable 👍
Always!
this video was so helpful thank you so much. I've been searching youtube for bottling info and had a hard time. how can i i bottle without the cork and use a cap instead? i hope you see this. thank you in advance.
Charles, this was a good video. I have a tip for labels though. If you are reusing your bottles and want to have labels nicer than tape and marker, you can print them out on regular copy paper. Cut them to shape, then wipe down the back of the label with milk (cows milk... whole, 2%, skim; grade doesn't matter but it must be cows milk) then apply the label to the bottle. The lactose will hold it in place until it gets wet then it will slide right off. Very easy to clean up for reuse and no need to stock special label sheets.
Cheers, mate!
Thank you for the comment.
Again, thank you so much for these videos!!!❤
You did a great job of explaining the process.
Thank you for watching.
Thank You, that presentation was very well done.
When you explained the funnel i felt personally attacked. Thank God for this video, you are a life saver!
This is actually my favorite video.
Awesome, now I feel like I have to watch all of your videos
Glad you like them!
Great video and great sense of humor.!!!
Glad you enjoyed it!
Just the info that I need right now. CHEERS 🍻
Thank you for watching. This was one of my favorite videos.
tri goof off for removing labels a small bottle does a lot of labels move tape sticky stuff, gum.... but OK I ended up saving a few of these now after I subscribed and watched a lot of them and again I'm gonna thank you💜💜
Thank you, sir. I needed this.
Thank you so much!!!…this is everything I needed!!
Glad it was helpful!
Consider becoming a supporting member of DIY Fermentation by joining: th-cam.com/channels/yogN69ayejYnRaQC3eZsxg.htmljoin
Amazon , Brewdemon & Canva affiliate product information.
As an Amazon Associate & Canva Affiliate I earn from qualifying purchases.
My current winemaking setup:
BrewDemon Fermenter: www.avantlink.com/click.php?tt=cl&merchant_id=f34b031c-e43a-43a4-973d-24d17c9a727a&website_id=ebe44688-8c34-46de-b945-9406903c8ad6&url=http%3A%2F%2FBrewDemon.com
Wine Yeast Sampler: amzn.to/3F8gNtf
Hydrometer: amzn.to/3l2XbMS
Airlocks: amzn.to/36bpGlg
Wine Corks & Caps: amzn.to/3vgBA9w
Wine Bottle Corker: amzn.to/3zO4fVa
Stoppers: amzn.to/3673Tv1
Racking Cane: amzn.to/34YyP19
StarSan: amzn.to/356Tnot
Straining Bags: amzn.to/2VKkW4y
I love your labels.
Thank you.
Another excellent video sir. Thank you.
The video is very informative. Thanks.
Glad it was helpful!
I assume you prefer to cork over screw tops. What is your reasons? Do you buy new bottles or only reuse used bottles?
Just personal preference. All of my bottles are used bottles. Now, that I make more than I drink, I'll probably have to order 3-4 dozen new ones soon, it's starting to hold up production..
Great info corking had me nervous but you showed me how it’s done!
Glad I could help!
@@DIYFermentation I got those medium size bottles with the tops that clamp down I will start looking for bottle deals now!
Great job once again. I can’t believe you’re already bottling. I hope to be there in a month or two.
That banana wine cleared very quickly. It did not require degassing, and smelled great.
I made some wine from wild grapes. It tastes ok but I don't think I let it ferment long enough . I put it into the fridge after racking. Is it position to take it out the fridge so it can continue fermenting for more time or is the yeast dead?
Thanks heaps love from Australia 🇦🇺
Glad that you enjoyed the video.
Thank you sir, I'm getting close to starting to bottle and was always wondering how to do this!
Thank you for watching.
I want to bottle & cork some traditional Mead. I am doing 1 Gallon batches I want to test 1 bottle in a couple of months and test another in a year and I want to do a long term aging on the other 2 bottles. I hear that I need to keep the cork moist when storing and corks are only good for about 5 years. How do I choose a long term storage cork and is it best to store the bottle up right or on it's side?
Thank you again for another fantastic video
Your welcome.
I really enjoyed this video!! Very helpful. Thank you 😊
Thank you for watching.
New subscriber. Lot of great information. I appreciate you.
Thank you, glad that I can help.
Thank you so much it really appreciate your videos
Thank you for watching.
Absolutely Awesome Vid 😃
Thank you for watching.
LOVE YOUR CHANNEL! Thanks for sharing.
Thanks for watching!
Hi, I really enjoy your videos, based on your experience is the style corker you recommend for beginners or are there any others that you would also suggest? Thanks in advance and keep up the good work.
Depends on how many bottles you're planning to cork at one time. The hand corker is fine for the 1-gallon (5 bottles) batches. If you are making 5-6 gallon batches (25-30 bottles) then it will probably be an easier time of it to use a floor standing type like this: amzn.to/3dxhjV6
@@DIYFermentation thanks for your reply. I've seen reviews which said that a similar style two lever corker damaged or caused an indent to the top of the cork, have you ever experienced anything like that?
Yep, that indent is a real thing, for natural corks, it goes away after a few weeks, for artificial corks, well, it stays around for a while.
nicely done
Thanks! This one is actually my favorite video.
Very helpful! Have you done one with how to cap sparkling wine?
Not yet! I would probably use Otis style swing-top bottles when I do.
Im trying to reuse a case of screw top lid wine bottles. Can i cork them for short term personal use? Or should i reuse the screw top lid with a new gasket? Any info helps thank you in advance
Which ever method you use, be sure to properly sanitize them before hand.
Extremely helpful video.
Thank you for watching.
This is great. Does the shape or color of the bottle have any affect on the wine?
The shape of the bottle has no effect on the wine. The color of the bottle may have an effect on the wine in bright environments, but since my bottles are stored in a relative dark location color (or lack thereof) is not an issue.
Hi there. Loving your videos. When is best to degas? After primary fermentation or prior to bottling or neither? Thanks in advance.
Prior to bottling. No point attempting to degas after primary when the wine will continue to produce CO2 for several months.
Nice job! Thanks!
Thanks for watching!
Fantastic video
Nice video, easy to follow. Thank you
Thank you for watching. this was one of my favorites.
Interesting your video... my question is like this, how many day or month in the carboy before transfer to bottle?
Ther's no set time. When the wine appears clear and there's no sediment at the bottom of the carboy, and hydrometer reading remain unchanged after taking readings several days aoart.
For some natural cork you need to sanitize them in a 1% metasulphite solution, then soak in warm water for 5-10 minutes. It really depends the corks you buy, so always read the instructions specific to those corks.
A quick soaking is starSan is the method that I use. I should have stressed that in the video. But good advice, thanks for the input.
Should the corks be dry before corking? (From the sanitizer)
Great, thank you again.
Thank you for watching.
Nice information 🙏👍
Thank you, and I'm glad you found it helpful.
very helpful
Thank you, I had fun making this video.
Great videos! Thanks for making them.
Glad you like them.
Quality Sir thank you!
Thank you for watching.
@@DIYFermentation Always a pleasure Sir... Whilst I educate.
Gosh funnel was the first thing I thought of
Thank you....great video....
Thank you too!
Did you add potassium metabisulfite and potassium sorbate to your batch before the video cause I see you did not put a pinch of metabisulfite in before capping
No, this channel prefers a more natural approach. It no longer uses sulfites. I will instead use pasteurization to sabilize my wines/meads.
Thank you for this video. Where did you purchase your wine bottles?
The wine bottles are recycled bottles shelf wine bottles from Walmart. They used to cost $2.48 and I used the wine for cooking. They now cost $2.98 and I now use a much better quality of wine for cooking.
Hello! I'm having trouble figuring out how to get 6 labels on one page like you have. It seems I can't duplicate a wine template design on Canva. How do you get all those labels one one page?
Thanks!
I'm sorry to hear about your issues, however you may wish to contact Canva support concerning their wine labels. Other than illustrating that it is possible to produce wine labels, word processing configuration is not a area that this channel will support.
My bottles came in this week. How much time should I wait between degassing and bottling?
What I do is after thoroughly degassing, I immediately bottle and place a large cap or other cover over the bottle to let any remaining gas rise out, after a couple of hours usually overnite, I will then cork the bottles. After watching the corks for movement for another day, I'll usually then label, and cap the bottles and put them away for aging.
Great Video , thanks
Glad you enjoyed it
thats some pretty fancy stuff..
Thank you for watching.
I think I'll stick with screw-tops. 😀 I found a solution to labels that don't want to come off, Avery have a range called 'Removable Labels', they work well, perhaps a little thicker than normal, they don't tear easily when you peel them off.
Thank yo for your comment.
Great video. New to DIY wine making but feel like your videos are gonna be really useful. Quick question. When racking the wine a few days ago I transferred it from a carboy to a large bucket (all sterilised) however I poured the wine in to the bucket. Have I ruined it? It’s going to be everyone’s Christmas present so I’m really hoping not 😬. Thanks for the video
If you were doing your initial rack from primary to secondary, and this was within the 3 to 5 day period, then you be ok. If you are using campden tablets, then you might want to use that to help reduce oxidation. If this was a later racking, then there's the possibility that the degassing that would occurred during the pour may have displaced enough oxygen in the bucket (co2 being heavier than air). Add campden tablet(s) to be sure and hope for the best.
These videos are great! Thank you 🙏 😁
Glad you like them!
I've found rubbing alcohol one of the easiest ways to remove the existing label.
Did you do a tasting of the banana wine?
Hot water and an SOS pad (Brillo for you red states) works well after scraping off as much label with a sharp knife as possible.
Course steel wool and soap
sir which is the best wine clearing substance to clear to wine from cloudy to crystal clear....
The best method of clearing your wine is time. Although it will not be covered on this channel bentonite is probably the most widely used substance for clearing wine.
Time is best and budget friendly of course, but If you want to clear it sooner then nature allows try Ritchies Kwik Clear. I always have a stash of this around and will work in 24 hours to great effect.
Thank you for the video.
Thank you for watching.
I have trouble finding that corking tool. Is there an alternative?
They still have them on Amazon:
www.amazon.com/Home-Portugese-Double-Level-Corker/dp/B000FRWJNE/ref=sr_1_2?crid=16O446677LDWR&dchild=1&keywords=wine+bottle+corker&qid=1603595307&sprefix=wine+bottle+cor%2Caps%2C178&sr=8-2
How many times have you wracked the wine to get it clear
In the case of that banana wine only twice times. From primary to secondary, and once before bottling. Normally my wines 3 or 4 rackings and plenty of time.
Just subscribed great video
Thanks for the sub!
Thank you
You're welcome
How do you feel about wingtip bottles?
I don't know what those are.
I loved the video.
Thank you. Glad that you liked it.
Love your videos 😍 I have my first batch in primary 😁
Don't rush drinking it. Give it plenty of time.
DIY Fermentation thank you 😊 making the cherry wine - I watched how you are back sweetening it, I will as well. I will keep this in mind and keep reminding myself to have PATIENCE 😂
Just thought I'd mention that, in my opinion, the easiest way to remove a label from a wine bottle is to soak the bottle in water that has had some baking soda dissolved in it. Let it soak for about half an hour and the label peels right off.
Baking soda... that's interesting, I'll give that one a try.
honest question, if you suck on the hose, wouldnt you have many more chances of introducing bacteria from your mouth than when simply pouring it?
Mouthwash, or a shot of distilled spirits (I'm partial to scotch myself), should help with that. Pouring it in all by guarantees you oxidizing the wine. Additionally, I pasteurize my wines/meads now to further reduce any bacteria.
Did he say WordPerfect? That takes me back.
I haven't used WordPerfect in decades. It's MS Word.
nice vid bro👏🏻👏🏻👏🏻
thanks bro.
No problem
Hi Charles, thanks for a great video. What’s your thoughts on reusing screw cap bottles? 🙂
The topic came up during one of my livestreams and although I don't use them, I'm told that they can be reused.
Magnificent
Thank you for watching.
@@DIYFermentation I’m following your rules from Vietnam 🇻🇳
@@DIYFermentation and some wine making supplies are really difficult to find. Such as bentonite, dualfine, campden, hydrometer for wine, wine yeast, Crocker, enzyme etc…
Nice
Thanks
Cool.
Thank you for watching.
Auto-siphon. Not a bottling wand. But I bet you know that now. Lol
11:35 achoo?
Thank you for your comment.
Haha! A paper cutter, or a paper cutter!
Thank you for watching.