TO ANYONE WATCHING THIS VIDEO: Cutting on a table saw without a fence or mitre gauge like he does at 4:12 is extremely dangerous especially with unsupported overhanging ends like that. When you cut like he is doing in that clip, there is nothing to stop the workpiece from twisting and binding against the blade which causes kickback and is a very real hazard on an unsupported table saw cut. When a kickback happens the blade grabs onto the work piece, often tearing off a large jagged chunk, and flings it back at your face. It also pulls your hand in toward the blade. Many many people have, and continue to, lose fingers, hands, eyes, and more from making cuts like this. It is easily avoidable with a few basic precautions. In this case he should have used a mitre gauge, but really, the table saw was not a good choice, at all. A better option for this type of crosscut would be a mitre (crosscut) saw, circular saw, or just a simple hand saw. If you haven't been properly trained on a tool DON'T USE IT. Take 5 minutes to watch a TH-cam tutorial on how to use "x" tool so you at least know the major safety hazards. Get trained first and then use it. When mistakes involving power tools happen, they happen unbelievably fast and can cause serious carnage. Like, losing all of your fingers or parts of your eyes kind of carnage. Take care of your body. You only have one. Also, the cost for a surgery to reattach a single finger is about $60,000. Just keep that in mind as you're shoving an unsupported 2x4 through an 8" razor sharp carbide tipped blade spinning at 3,500 RPM.
If you want a handrail so bad you can make this and put it on a set of stairs from top to bottom, the longer the stair set the longer and heavier the rail will need to be.
Just made my kid's day after he shared this video and we made the rails (in CO, the materials cost $100) totally worth the smiles. Thanks dudes for sharing how to make. My son timed it too.. 22 minutes to make the pipe rails and 36 for the metal (metal is harder to cut and drill).
My dad made me a rail in 10 minutes and did not pay anything he just welded 2 metal plates to both Sides and done it is 150cm long and 6cm wide 12cm is the height
@@undialed, thank you so much for replying you made my day i love your videos i've been here from the start and i would really like to meet you in real life :)
TO ANYONE WATCHING THIS VIDEO: Cutting on a table saw without a fence or mitre gauge like he does at 4:12 is extremely dangerous especially with unsupported overhanging ends like that. When you cut like he is doing in that clip, there is nothing to stop the workpiece from twisting and binding against the blade which causes kickback and is a very real hazard on an unsupported table saw cut.
When a kickback happens the blade grabs onto the work piece, often tearing off a large jagged chunk, and flings it back at your face. It also pulls your hand in toward the blade. Many many people have, and continue to, lose fingers, hands, eyes, and more from making cuts like this. It is easily avoidable with a few basic precautions.
In this case he should have used a mitre gauge, but really, the table saw was not a good choice, at all. A better option for this type of crosscut would be a mitre (crosscut) saw, circular saw, or just a simple hand saw.
If you haven't been properly trained on a tool DON'T USE IT. Take 5 minutes to watch a TH-cam tutorial on how to use "x" tool so you at least know the major safety hazards. Get trained first and then use it.
When mistakes involving power tools happen, they happen unbelievably fast and can cause serious carnage. Like, losing all of your fingers or parts of your eyes kind of carnage. Take care of your body. You only have one. Also, the cost for a surgery to reattach a single finger is about $60,000. Just keep that in mind as you're shoving an unsupported 2x4 through an 8" razor sharp carbide tipped blade spinning at 3,500 RPM.
yeah, I was legitimately scared something like this was gonna happen at 7:19 when he was cutting the metal and the blade started stalling
I just saw it
even though I skate and you scoot
i love this channel
At the end of the day everyone is just doing something that makes them happy
So you dont hate scooter riders right?
@@caseydinarte3897 i don't hate scooters because I was one XD
multyplexer multiplexfer we are the exact same lol
Same
I just got back from home depot with almost the exact same ingredients...AND THEN found this video! Perfect tutorial, thanks guys and girl!
I like how the title says “handrail”.
#clickbait
But technically can’t a hand rail be along the ground to help people walk?🤔
undialed Nah, then would be call a footrail
More of a flatbar
If you want a handrail so bad you can make this and put it on a set of stairs from top to bottom, the longer the stair set the longer and heavier the rail will need to be.
@@jdrippystackin I never said I wanted a handrail.
Just got done building the one with the mettle it’s amazing and I can finally lean how to bring thanks so much
Dude videos like this are sick, do more!! (make a ramp:)
Coming soon we got it covered
he alredy did
Step one : crack an egg in a bowl.
Step two:put the bowl in the microwave for 45 seconds.
Step three: take it out of the micro wave and eat it.
I looked up how to make eggs in the microwave and this came up.
Your welcome, now you can eat your eggs while you shred
Bruh
Great rails !!
I gotta pick one model for my son. I feel like the metal one might be more durable..
Thanks for making this project easy to follow.
Can you provide what size wood pieces you bought and thickness of pvc tube you used! Thanks they both turned out great on the video.
Dude this is going to be so helpful thank you
It’s so easy Anne cheaper than buying a rail
Love how you're using a countersink to literally drill thru the metal. Championbrah
I thought you guys skateboarded until buddy busted out the tail whip
Just wanted to drop that same comment.
I made two of these! very cool!
best channel hand's down
Just made my kid's day after he shared this video and we made the rails (in CO, the materials cost $100) totally worth the smiles. Thanks dudes for sharing how to make. My son timed it too.. 22 minutes to make the pipe rails and 36 for the metal (metal is harder to cut and drill).
Glad he got to build something for his personal enjoyment. It’s also great seeing supportive parents!
My dad made me a rail in 10 minutes and did not pay anything he just welded 2 metal plates to both Sides and done it is 150cm long and 6cm wide 12cm is the height
Thanks guys I built the metal rail and it is awesome 👍👍
The dude who explained the building process deserves a Grammy
BRO THANKS i finally can build a good rail under 50 bucks love the vids keep it up
I don’t know scooter can grind on pvc until noww
I watched this video multiple times and each time at the start I see kendra and keep thinking she’s a Halloween prop lol
scooters are the best!
Cool Scooter Boiz scooting "handrails"... Such wow!
yeah this video is so cool!!
Get it on!
I love these types of videos make more please
Lol damn this man lives life to the extreme! Cutting wood on a table saw like this man is can be what u would say not safe lol
Cool yeaaaahhhh awesomeness....
Seriously, cutting metal with a woodsaw
They ride scooters. What do you expect?
Etienne Theriault what's that supposed to mean?
That is exactly what was going through my mind... amateurs lol
you have a pair of 350s as your profile pic stfu
are you acoustic, there was a metal blade on it. you can literally see the wood blade in the background
So gnarly
please make a video "how to make a small quater" or something like this
good video. a suggestions. start the drill BEFORE applying pressure to your material - you're asking for a broken bit
Great bro like the rail!!!Thanks
Pvc pipe is really good 😂😂 for being Plustic
going to be building a couple of these this weekend.. luckly no grinders were harmed in making this video! :)
I LOVE UNDIALED HOPE YOU GUYS HIT A MILLION SUBS! IM YOUR BIGGST FAN
Thanks you so much!!
Hopefully one day
@@undialed, thank you so much for replying you made my day i love your videos i've been here from the start and i would really like to meet you in real
life :)
Hi Clayton I just got into scootering and i hope that someday I will be able to achieve what you can do
Just ride as hard and much as you can:)
Thats my boi
Thanks I made one
That cool
im a true fan ahah still watching this vid in 2020 @undialed
This video helped me very much
Love this vid
Love your vids
Best channel
i have been waiting for thus boyz
Can someone tell me the exact things you need like the size of the rail and nails and other things
FaZe Sme11y fr
Damn 50 bucks I gotta try that myself
Lit
🔥 I made one another way but I might check this method out
What one is better for skating
Fill the hole at the end of the wood with wax blocks
Can you explain the reasoning for doing this? To help the end not bend?
It’s just so you have a place to put wax
For so we’re close to put it
his song in the car LUCID DREAMS
I love undialed
Haha at :05 "Kendra is holding the pvc pipe" while holding abs pipe.
i mad a shorter one of these and mine wasnt as stable while grinding but it really does work
Thx
I am going to make one of these but I need to know if the PVCs were metal
If your not planning on grinding the whole rail the wood on the sides will get in your way so if you make this rail keep that in mind
Imma make dis
Lit af 🔥
what are like the sizes of things you need and the screws and stuff
Does the pvc rail work with skate boards
Nice “handrail”
I made my rail yesterday from 2 by 4 and from plastic.
What size wood did you buy for the body? And do these rails work for skateboards too?
what did you put on the rail to make it smooth
It rhymes with your name
how long are the pieces of wood at the bottom
Dope video boys😈🛴
Thanks dude
nice vid
1:49 flexing the car
thx alot im gonna made a sick rail now
Nice 👍🏽
pls make a tutorial for tailwhrips
ty i love u
Yo undialed not that you’re gonna see this but as a dude who has never scootered before do you think I would be able to shred that first try?
Possibly. They are something good to learn on, just alittle tall for a beginner. I think you would be fine
I want to see more fingerboarding
Every time i look at a thumbnail i see :0
Does using pvc pipe make it sketchy or harder to grind
I got you're helmet
Best helmet on earth, straight up
Here before the video
can you guys list all the supplies plz
for the shot gun rail
0:23 he looks like tony hawk😂
And Stacy Peralta mixed together
The scooter counter part
What are the metal things called. I've been looking for a while and cant find it.
Ask us how to make a bank or a quarter! Great video btw!!!
Coming soon don’t worry
Yay! 😁😄😁
Do the pipes break easy??
thats what im saying
Can u use a skate board with this?
Tag us in videos of you shredding your new rail @UndialedTV on Instagram
Tilt x Undialed Collab has dropped on the www.undialed.co Website:)
Nice i made IT
Clips on the gram now ?
Can you skate on it too?
What are the dimensions for the supports?
Man I thought this was for skating!! Sweet though
Cutting steel with timber saw?
i cant find anywhere what that right angle shaped metal is called that goes on the grins rail can someone tell me
Does the metal or plastic slide better?
metal
@@linusjohnsen1791 thank you
What 1 is better?
More fingerboard vids pls
What material of metal do u need?
Why did you do the double pvc pipe
Which rail is better
Came here looking for instructions on making a DIY handrail for my front steps 😆
please do a tutorial on how to focus the camera next!