Starting an awesome new Air Arms project. Refurbishing the stock...
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- How to camo paint a stock. This is a one off Air Arms unregulated ultimate sporter in a very rare s410 biathlon stock. I will be bringing a few more custom rifles onto the channel in the coming months to cover a broad range of budgets from the budget entry level right through to the high end target rifles. Which will be the most accurate?
i cover how i prepared it for paint and the processes involved. i left a few fails in as well... i think i might do my hft500 next?
I'm not sure which scope to run on this when it is finished, im tempted by the new falcon endura s40i ffp but not sure yet. the new T50i is proving very popular as well.
#airarms
#optisan
#camo
#falconoptics
#arken
Thanks for showing us how you did that, it looks terrific and l agree with you that the green looks much better as the finished colour 👍.
It looks cool the wrong way around, I love a bit of green 😆
This sounds a great direction to go in, a great post and looking forward to your future videos 👍
Lots in the pipeline mate, I've some mad plans for some budget builds too,which whilst I love the fancy rifles,I do love a sleeper...
Brilliant video good to see how you tackle things and the ideas, iv had a s510 for a few years iv fitted a Laines regulater in it not a easy job but not difficult but super stable after getting it set up, looking forward to see what you do next
I've had a load of regged s series models,this one has been perfect since day one so I've left it well alone. It's desperate for a service now but I don't think I'll go the reg route tbh. It'll be useful for the channel having a few regged Vs unregged options .
😉
@@tillysgunstocks I like it have a few iv managed to keep it simple one springer and one pcp, if it's been good from day one your very lucky mine changed the point of impact through the charge nothing a good service can't fix on a gun that ago 👍
Superb vid.. A refreshing change
I want one! Going to keep an eye out for a tatty stock to have a go with
They come up every so often mate. Tbh decent complete mprs are pretty valuable nowadays.very sought after..
Air Arms sit up and take note !!
top job Mukka 👌
I love it mate, turned out great and looks and feels mega
Another great Video. Always make things look easy. Sign of a great craftsman 👌
Nice work! I did a similar job on an Evanix stock using leylandii cuttings. First coat in a dull brown then a blue/green tinted grey main colour through the mask of cuttings. Lastly a coat of matt lacquer. Why not put some pics up on an AGF thread and I'll post some too.
Nice job
Well worked on.looks good
nice work , those mag holes in the fore end looks to me a easy damaged part of the foreend
Yep they definitely look a bit fragile, don't think they would hold up to a good thrash on the hft circuit 🤔
Looks great 👍🏼👍🏼
Cheers mate, it'll do for the moment 😉
Nice job.
Cheers mate 😉
Can you paint one up with some snakes, spiders, & small drop bears for the Aussie market? 🤔
🤮 sticking them nasty spiders to it to paint around... No thanks 😆
What you have done looks great, I too prefer the feathered look to the camo edges rather than the harsh lines using stencils. Is the clear sealer okay for laminate stocks as well? I don't think the internal services on my Effecto PX5 stock are sealed, so would be nice to do something.
Morning mate, if it's laquered laminate, I'd be more inclined to give the inlet a gentle key up, remove any overspray/high spots and work in a good few coats of tru oil. That won't need Painting over the top. Tru oil is more a varnish than an oil and perfect for cleaning up Inlets 😉. As always pay good attention to any areas that might hold water.
@@tillysgunstocks Yes, it is a lacquered laminate, unless I choose to rub it down completely. Have to fix the air leaks first though! Thanks for the advice, much appreciated. 👍
👍😉
Do you shoot competitively?
My shooting club competes with air rifles but they don’t even own any competition air rifles or have anyone that competes in the air rifle discipline.
There’s actually just three competitive shooters in the entire country (the Netherlands) that compete on an international level, these three shooters are female juniors, with just one of them planning to compete in the olympics.
I shoot with .22 sharp (pistol 12.5m and carabine 25m) to keep my club and KNSA membership and the rest of the time I shoot a .25 pcp pistol (non competitively) at varying distances.
Hi mate, there's certainly a lot of Dutch lads and a few women that compete in International hft. I've a lot of customers over there and have shot with many over here 😉
Have a look for hft clubs... You might be surprised or my geography is really bad 🤣
@@tillysgunstocks
Just had a look and I had no idea hft was a thing, I was only looking at the official KNSA (the official shootings association) listings and they only organize competitions in the olympic discipline (12.5-25 meters).
@@MightyRude it's pretty big mate. Loads of great people too. You'd enjoy it for sure!
I have an early brocock compatto with the black synthetic / plastic stock, can i use the same green paint straight onto it? Cheers
A few years back, a friend of mine painted a few tac stocks. I can't remember exactly but I seem to remember he found a particular primer for car bumpers/plastic panel work . That seemed to adhere well enough. It would be worth investigating some like that over normal etch primer I would think 🤔
Where can you find those stocks?
They're pretty rare nowdays mate. Maybe try the factory see if there's any knocking about?
Its not the ultimate ultimate as its not regged. My s510rus outshoots hft500 and xti50.
When will you start doing your laminate hamsters again
I'm starting another small batch next week mate😉
@@tillysgunstocks ah right ok fantastic. For the HFT500?. I was just wondering if you could recommend someone that does the adjustable lever other than rowan. They are good but so expensive 🎯🔫