Thank you. Always wondered which was the 'right way round' and, much as I try, I don't always instantly get the physics of engineering. Explanations like these are really helpful- now I have a better conceptual understanding. Look forward to watching your other vids! Cheers from the UK
It’s nice to know that when I failed a test in fluid power course on tool identification, that indeed in industry, what they called a slotted adjustable on the test, is in fact, A CHANEL LOCK WRENCH. Thank you for winning a bet for me. Now only if the internet results for pictures match this fact…
I'm a musician, among other things, so I have an appreciation for the music of the opening. BUT, it's waaaaaaaaay too long for this forum. I click on this site because in the 3 seconds after my Google query, it seemed like the shortest dist from ignorance to knowledge. The tutorial does just that and the guy delivering it does a good job conveying the info mostly straight forward. Excellent work. I'd give it 4 stars. I'd suggest shortening intro to 1/5 or 1/6 of present length. I'd like to see that.
I think some people like to pretend they have a TV show with an opening and I've seen people with much longer ones... I agree in this format it's not such a good thing...
I agree that most of the time, people use them because they're too lazy to get the right wrench, but as a vehicle alignment tech, I have seen some absolutely wild tie rod nuts. Wrong hardware, rusted, rounded, you name it. I use adjustables quite a bit, and this video was quick and to the point with great info and an easy way to remember. Thank you!
You're welcome. Now that you know how adjustables and channel lock type pliers work, you can try using them both ways so you can see the difference in how much harder they grab the fastener. With regards to the channel locks, when used the correct way, you barely have to squeeze the pliers in order for them to 'bite'. Have a great 4th!
You can use the adjustable wrench in either direction without worry. You can tell because it’s got the same angles as a standard open end box end wrench for being able to use in a tight spot. If you are going to put cheater bars or a come along on the wrench (don’t) then yeah make sure the force is on the top jaw. If you’re using correctly it won’t break on you in either orientation as long as it’s worth anything.
I would hate to follow behind you replacing all the bolt and nuts you rounded the corners off from using adjustable wrenches backwards, it has to be in the thousands.
Very helpful vid, Ty. I was considering a change from Channellocks, so I took a look at the Knipex factory on-line tour. Looked good until the final third of their show. Their narrative changed from about tool quality to them congratulating themselves for their European social agenda application. For me it's about tool quality and not about paying for America's enemies' lifestyle. (So, I'm staying with Channellock blue.)
Great question. 'Channel Lock' style pliers are designed to rotate things. Grabbing something to pull isn't necessarily what they are designed to do, however you can make them work. Some pins are difficult to 'grab' because the pin material is harder than the pliers making it difficult for the jaws of the pliers to hold the pin. If you can grab the pin and rotate at the same time you are pulling, that technique works best because it breaks the friction that's holding the pin in the pin bore. If the pin has a head on it, even better because it allows you to get a better purchase on the pin. 'Hooking the head of the pin, or making certain that one of the jaws of the pliers is grabbing the head, ensure that the pliers will retain the grip on the pin. Just be careful not to mar the pin too badly to where it can't be used again. Thanks for the question and have a great day.
Good morning Goran. I'm assuming when you said 'blocks' you meant 'locks'. I'm not quite sure what style adjustable you are using, however I'll assume you're using the type that adjusts with a worm gear. If that's the case, you may have an inexpensive adjustable or it might not adjust because there is still some force on the work gear. The next time it locks up on you, tap the moveable jaw on something to relieve the pressure on the worm gear. Since the gear is so small that your trying to rotate, you don't have that much leverage, so any additional forces on that gear will make it tough to rotate. Good luck,
I have also recorded in mind, procedure as MID,, which equals to movable jaw in direction of rotation. I am 70 years old and Indian. I use tools for DIY only. I am engg graduate of 76 batch. Now enjoying Retired life happily, along with grand children in India.
We Indians are accustomed to British tone and not at all US tone while hearing English. When I heard you, I understood every word and procedure despite you are from Penn. Probably you had British ancestors. I see lot of Holywood films on TV. But every time I need a Headphone. Still I fail to understand 100%. May God always with you.
That's incorrect. There's the same amount of pressure on both jaws. The fixed jaw is twice as strong as the moveable jaw. Look at the contact points. The way you are using the adjustable wrench the leverage advantage is against the weak jaw. Test 2 wrenches in a press and see which way holds up the best. The press will need a pressure gauge.
I'm going to have to respectfully disagree with you. There's no argument that the fixed jaw is significantly stronger than the moveable jaw. I can't speak to the value of 2x as strong, and I'm sure you don't have the science to substantiate that claim either. And, I don't have to test them in a press to know which way the tool functions best. You can simply speak to manufacturers of these types of wrenches who design them to understand that they are designed to have forces applied in a specific direction. Use them as they weren't intended and they just don't have the same strength; it's just that simple. You can easily test this with channel lock style pliers. Try gripping a piece of 3/4" OD alum round bar with the jaws one way and then try to use them the opposite way. In the direction they are designed to be used, the jaws will naturally bite down on the material and grip it securely. Flip the pliers around and the pliers will rotate on the soft piece of alum without the jaws gripping the material. And thanks for the pro-tip with the pressure gauge, I would have never thought of that.
I agree with you about the pliers. I don't have access to a press or I would make a video and test them. The reason the manufacturers are wrong might have to do with tradition. That's the way most people use them. Or maybe they want to sell more wrenches, especially after someone uses a cheater on it.
@@johnpapa8681 With regards adjustable wrenches, keep in mind that the only reason the moveable jaw is there is to keep the fixed jaw on the fastener. The majority of the forces, when used as intended, are applied to the fixed jaw. I encourage you to perform your own test to see for yourself.
@@billetproofdesigns5609 what you are saying about the jaws isn't possible. The same amount of force will be on both jaws. What would cause there to be a difference?
Thank you. Always wondered which was the 'right way round' and, much as I try, I don't always instantly get the physics of engineering. Explanations like these are really helpful- now I have a better conceptual understanding. Look forward to watching your other vids! Cheers from the UK
You're welcome. Glad we could help and better put that tool to work for you.
Glad we could help explain. Makes a big difference in the field, especially with really tight fasteners.
wow I didn't know about placing the adjustable jaw in the direction of rotation, thanks for that!
No problem, thanks for watching!
Same here. I am not handy at all, and I came here to see how to use pliers. Thanks for the video!
Thank you! This is the third video I watched and the most straight forward. Much appreciated!
You're welcome!
It’s nice to know that when I failed a test in fluid power course on tool identification, that indeed in industry, what they called a slotted adjustable on the test, is in fact, A CHANEL LOCK WRENCH. Thank you for winning a bet for me. Now only if the internet results for pictures match this fact…
Haha! How 'bout we split the winnings? Good luck!
I'm a musician, among other things, so I have an appreciation for the music of the opening. BUT, it's waaaaaaaaay too long for this forum. I click on this site because in the 3 seconds after my Google query, it seemed like the shortest dist from ignorance to knowledge.
The tutorial does just that and the guy delivering it does a good job conveying the info mostly straight forward. Excellent work.
I'd give it 4 stars. I'd suggest shortening intro to 1/5 or 1/6 of present length. I'd like to see that.
👍
I agree. I hate TH-cam vids with long intros. I think most people, myself included, fast forward that part. It adds nothing.
Agree. 20 seconds of music is about 15 seconds too long. Good video though with good info.
I think some people like to pretend they have a TV show with an opening and I've seen people with much longer ones...
I agree in this format it's not such a good thing...
I agree that most of the time, people use them because they're too lazy to get the right wrench, but as a vehicle alignment tech, I have seen some absolutely wild tie rod nuts. Wrong hardware, rusted, rounded, you name it. I use adjustables quite a bit, and this video was quick and to the point with great info and an easy way to remember. Thank you!
I can only image the kinds of things you see working on the public's cars. I'm glad you learned something new. Take care and thanks for watching.
Thanks for the tip. I appreciate you sharing your knowledge. I'm a homeowner/ DIYer and I never knew this. Huh, I learn something new everyday 🙂
And that's what's important; never stop learning. Thanks for watching!
@@billetproofdesigns5609 Agreed 👍🙂. You're never too old to try ! You only stop learning when quit trying . Have a good one !
In crane repair the adjustable wrench is our go to tool.. we just can't be taking an assortment of wrenches along with our other tools up with us.
THIS IS A VERY INFORMATIVE VIDEO...
We're glad you think so. Thanks for watching.
Thanks for your information
You're welcome. Now that you know how adjustables and channel lock type pliers work, you can try using them both ways so you can see the difference in how much harder they grab the fastener. With regards to the channel locks, when used the correct way, you barely have to squeeze the pliers in order for them to 'bite'. Have a great 4th!
Very helpful video i try it
You'll especially notice a difference when using channel locks the correct way. You almost won't even need to squeeze the handles.
Thank you, friend.
This also applies to pipe and open end wrenches.
You are 100% correct and thanks for saying this. The jaws of other tools are made similarly and the same principle can be applied.
Great vid
Thank you and thanks for watching! Hope it helps.
You can use the adjustable wrench in either direction without worry. You can tell because it’s got the same angles as a standard open end box end wrench for being able to use in a tight spot. If you are going to put cheater bars or a come along on the wrench (don’t) then yeah make sure the force is on the top jaw. If you’re using correctly it won’t break on you in either orientation as long as it’s worth anything.
👍
I would hate to follow behind you replacing all the bolt and nuts you rounded the corners off from using adjustable wrenches backwards, it has to be in the thousands.
Thanks!!
You're welcome! Thank you for watching.
Very helpful vid, Ty. I was considering a change from Channellocks, so I took a look at the Knipex factory on-line tour. Looked good until the final third of their show. Their narrative changed from about tool quality to them congratulating themselves for their European social agenda application. For me it's about tool quality and not about paying for America's enemies' lifestyle. (So, I'm staying with Channellock blue.)
nice and helpfull video
Glad to hear it. Thanks for watching.
Very nice
Thank you. Hope you learned something.
Nice
Thank you
How do you use channel locks to squeeze metal pins?
Great question. 'Channel Lock' style pliers are designed to rotate things. Grabbing something to pull isn't necessarily what they are designed to do, however you can make them work. Some pins are difficult to 'grab' because the pin material is harder than the pliers making it difficult for the jaws of the pliers to hold the pin. If you can grab the pin and rotate at the same time you are pulling, that technique works best because it breaks the friction that's holding the pin in the pin bore. If the pin has a head on it, even better because it allows you to get a better purchase on the pin. 'Hooking the head of the pin, or making certain that one of the jaws of the pliers is grabbing the head, ensure that the pliers will retain the grip on the pin. Just be careful not to mar the pin too badly to where it can't be used again. Thanks for the question and have a great day.
Hi,my adjustable wrench blocks every time after I use it. Is it the direction of use or I adjusted too tight? Can you help,please?
Good morning Goran. I'm assuming when you said 'blocks' you meant 'locks'. I'm not quite sure what style adjustable you are using, however I'll assume you're using the type that adjusts with a worm gear. If that's the case, you may have an inexpensive adjustable or it might not adjust because there is still some force on the work gear. The next time it locks up on you, tap the moveable jaw on something to relieve the pressure on the worm gear. Since the gear is so small that your trying to rotate, you don't have that much leverage, so any additional forces on that gear will make it tough to rotate. Good luck,
@@billetproofdesigns5609 thanks
thanks mate
You're welcome thanks for watching!
Super
Great
Thank you Priti
nice
Thanks!
wow!!
Hey Women use tools too you know!
Oooohhh yeah that’s right we don’t need a tutorial lol 😝
Very
Well alright!
And yet you're here watching the video aren't you?🤔
Only video, I could understand ( Good English tone) and procedure to use adjust and Waterpump pliers. God help you.
Thank you for the kind words and positive feedback. Cheers my friend.
I have also recorded in mind, procedure as MID,, which equals to movable jaw in direction of rotation. I am 70 years old and Indian. I use tools for DIY only. I am engg graduate of 76 batch. Now enjoying Retired life happily, along with grand children in India.
That's a good mnemonic device Shashikant. And hello from Pennsylvania.
We Indians are accustomed to British tone and not at all US tone while hearing English. When I heard you, I understood every word and procedure despite you are from Penn. Probably you had British ancestors. I see lot of Holywood films on TV. But every time I need a Headphone. Still I fail to understand 100%.
May God always with you.
That's incorrect. There's the same amount of pressure on both jaws. The fixed jaw is twice as strong as the moveable jaw. Look at the contact points. The way you are using the adjustable wrench the leverage advantage is against the weak jaw. Test 2 wrenches in a press and see which way holds up the best. The press will need a pressure gauge.
I'm going to have to respectfully disagree with you. There's no argument that the fixed jaw is significantly stronger than the moveable jaw. I can't speak to the value of 2x as strong, and I'm sure you don't have the science to substantiate that claim either. And, I don't have to test them in a press to know which way the tool functions best. You can simply speak to manufacturers of these types of wrenches who design them to understand that they are designed to have forces applied in a specific direction. Use them as they weren't intended and they just don't have the same strength; it's just that simple. You can easily test this with channel lock style pliers. Try gripping a piece of 3/4" OD alum round bar with the jaws one way and then try to use them the opposite way. In the direction they are designed to be used, the jaws will naturally bite down on the material and grip it securely. Flip the pliers around and the pliers will rotate on the soft piece of alum without the jaws gripping the material. And thanks for the pro-tip with the pressure gauge, I would have never thought of that.
I agree with you about the pliers. I don't have access to a press or I would make a video and test them. The reason the manufacturers are wrong might have to do with tradition. That's the way most people use them. Or maybe they want to sell more wrenches, especially after someone uses a cheater on it.
@@johnpapa8681 With regards adjustable wrenches, keep in mind that the only reason the moveable jaw is there is to keep the fixed jaw on the fastener. The majority of the forces, when used as intended, are applied to the fixed jaw. I encourage you to perform your own test to see for yourself.
@@billetproofdesigns5609 what you are saying about the jaws isn't possible. The same amount of force will be on both jaws. What would cause there to be a difference?
Nice