Als Werkzeugmacher bin ich immer wieder sprachlos wann ich deine bis ins kleinste detail, in perfekte handwerk angefertigte meisterleistung ansehe ! RESPEKT 👍👍👍
Das freut mich besondes, wenn solche Worte von einem Werkzeugmacher kommen :) Obwohl meine arbeitsweise und präzision sicher nicht vergleichbar ist mit jemandem, der das richtig gelernt hat
Sensationell, großer großer Respekt!! Welcher Vorteil ergibt sich den Klingenrohling zuerst zu härten und dann erst mit dem Grundschliff zu versehen? Mir wurde es andersrum gezeigt. Herzlichen Dank vorab und schöne Weihnachten! LG Jörg
Vielen Dank :) Gru dsätzlich mach ich das auch so, jedoch hab ichs bei foldern andersrum gemacht, um sicherzu gehen, dass ich keinen Verzug beim härten habe. Die Lagerlaufflächen und die Klingenspitze sollen ja perfekt zentriert und parallel sein
Nice work! Always coming here and then to your channel to see, if there is something new. BTW your first couple of videos I saw here, made me to give it a try by myself. Finished one so far, which I am very happy with, even if it`s far from perfect. But there will be more. It's a progress... ;)
Where do you buy your screws for your knives. I'm wanting to get into knife making myself and I want to make my 1st pocket knife but I'm having trouble finding screws to put it together.
Hey, great knife, is the bearing running on the titanium liners? Cause that will slow down the action. If you insert hardened steel washers 8 cents a piece, you wouldn't have this problem. In case it is already running on some harder material great job.
Thank you for the great work shared. I would like to ask about the disc saw you use to cut the liner. It would be great if you could post a link of a shop that can be bought
Thank you! It is a diamond cutoff wheel, which I bought at my local hardware store. Takes forever to cut with it through the liner but it works if you don't have a mill.
Awesome! Amasing knife. Now i see that you have a lathe. Pretty nice one. Few years ago i have same one. May i ask why you don't made some sort of knurling on a liner lock leaf and a flipper tale? (mabe this parts are named the other way)
Hi, what a nice work as always. I wish i was that talented for knife making I am Swiss too. But the french part of Switzerland. And i was just wondering: where do you buy your high carbon steel? I searched but wasn’t able to find anything else than normal S235 construction steel. That you can’t hardened If you can tell me, it will help me making my knives from something else than old kaltenbach saw blades… and they are a pain in the ass to drill through. Even unhardened 😂😂
Als Werkzeugmacher bin ich immer wieder sprachlos wann ich deine bis ins kleinste detail, in perfekte handwerk angefertigte meisterleistung ansehe ! RESPEKT 👍👍👍
Das freut mich besondes, wenn solche Worte von einem Werkzeugmacher kommen :) Obwohl meine arbeitsweise und präzision sicher nicht vergleichbar ist mit jemandem, der das richtig gelernt hat
@@rvdKnives Präsizionsmaschinen sind einersache aber echtes handwerk kann nicht jeder ! 👍
@@TaunusTV Danke 😍
Awesome work
Unreal work
Truely a thing of beauty. I love how you pay attention to all the little details.
Piękne wykonanie,świetnie musi leżeć w dłoni jest super!!!Gratuluję i pozdrawiam!
beyond perfect, what an amazing piece of art
Excellent craftmanship and design. Well done.
Such an awesome work of art!!! Thank you so much for sharing it with us! .....
Bob Gore from Minnesota, USA! 😎👍🏻🔨🔥🗡️
Thank you, Bob
Loved dama steel
It reminds me knives from Lee Bennet who makes knives in this way as well, excellent quality and great craftmanship. Good job.
สวยมาก งานละเอียดสุดๆ
Nice brother! Beautiful!
Жаль что раньше не видел подписка однозначно 👍👍👍
Me encantó tu trabajo, es una obra de arte, enhorabuena por tu canal, Un saludo
Very nice!
Jawoll! Schön geworden 👍
Отличные работы. Подписался на канал.
Sensacional. Parabéns 👏🏼👏🏼👏🏼👏🏼👏🏼
Sensationell, großer großer Respekt!!
Welcher Vorteil ergibt sich den Klingenrohling zuerst zu härten und dann erst mit dem Grundschliff zu versehen? Mir wurde es andersrum gezeigt. Herzlichen Dank vorab und schöne Weihnachten! LG Jörg
Vielen Dank :)
Gru dsätzlich mach ich das auch so, jedoch hab ichs bei foldern andersrum gemacht, um sicherzu gehen, dass ich keinen Verzug beim härten habe. Die Lagerlaufflächen und die Klingenspitze sollen ja perfekt zentriert und parallel sein
Hi, wo beziehst Du die Schrauben? Danke für das Video! Cooles Messer
Mazing job👍👍 wow.
Hut ab, geiles Teil !
Love it ❤️
Danke :)
Hi,
wirklich saubere Arbeit, mit viel Präzision,Gratulation!
Grüße Udo
Danke dir :)
Nice work! Always coming here and then to your channel to see, if there is something new. BTW your first couple of videos I saw here, made me to give it a try by myself. Finished one so far, which I am very happy with, even if it`s far from perfect. But there will be more. It's a progress... ;)
Thank you for checking out my channel! That sounds great, keep on trying :)
It will take me a while to finish the next one
Where do you buy your screws for your knives. I'm wanting to get into knife making myself and I want to make my 1st pocket knife but I'm having trouble finding screws to put it together.
The Titanium Screws are from TiConnectors
Hey, great knife, is the bearing running on the titanium liners? Cause that will slow down the action. If you insert hardened steel washers 8 cents a piece, you wouldn't have this problem. In case it is already running on some harder material great job.
It’s beautiful but where’s the deep carry pocket clip
Thank you!
The customer didn't want a clip 🙃
Thank you for the great work shared. I would like to ask about the disc saw you use to cut the liner. It would be great if you could post a link of a shop that can be bought
Thank you!
It is a diamond cutoff wheel, which I bought at my local hardware store.
Takes forever to cut with it through the liner but it works if you don't have a mill.
@@rvdKnives thank you very much for your answer!!
Gut gemacht.
Bitte sagen Sie mir, welche Art von Scheibe Sie zum Schneiden verwenden 1:28? Marke? Oder wo kauft man?
Danke. Viel Glück!
Hallo, das ist eine Diamant-Schleifscheibe. Gibts im Baumarkt :)
@@rvdKnives Danke.
Awesome! Amasing knife. Now i see that you have a lathe. Pretty nice one. Few years ago i have same one. May i ask why you don't made some sort of knurling on a liner lock leaf and a flipper tale? (mabe this parts are named the other way)
Thank you :)
I don't exacly understand, what you mean with knurling
@@rvdKnives I mean some cross hatching (dents, grooves) to make more comfortable grip.
Echt schönes Messer geworden, finde ich klasse, muss mich auch mal daran machen einen Plan zu zeichnen.
Hi, what a nice work as always. I wish i was that talented for knife making
I am Swiss too. But the french part of Switzerland. And i was just wondering: where do you buy your high carbon steel? I searched but wasn’t able to find anything else than normal S235 construction steel. That you can’t hardened
If you can tell me, it will help me making my knives from something else than old kaltenbach saw blades… and they are a pain in the ass to drill through. Even unhardened 😂😂
I always buy the steel from germany (nordischeshandwerk.de) or from schanzshop.de.
They have high carbon steel, howevsr I primarily use stainless
Wherever do you find literature on making these
Watch the series from ekim knives on youtube
Krass
bir tane hediye istiyorum❤
это просто охуенно!
🎊 ≋p≋r≋o≋m≋o≋s≋m
You are now exclusively making folding knives there will be no more fultangs
There will be fulltangs again ;)
@@rvdKnives Thank you for the answer the work is great