no I use a Jam Hub system it is really inexpensive been using it a while you can get 5 separate mixes...i use it for vocals, drums, 2 keyboards and bass...had it a few years now its a real good option for small churches with a 2 to 4 piece band
If these are passive (no pre-amp) why would one sound "louder"? -- unless the Behringer circuitry is causing some sound reduction. A straight-through signal should be the same volume. Perhaps you can describe your set-up and give a comparison of volume loss or gain when you bypass the Unit?
0:31 - "This is the Behringer P1" (Literally says "PM1" when he turns it over). This is so people don't get it confused with the actual P1 and wondering why they need 9volt batteries. In case anyone is curious, Behringer has 4 options currently for in ear monitoring; P1 - Stereo (or mono) belt-pack wired monitor (which can also be thread mounted to a mic stand). Requires 9 volt batteries. P2 - Mono belt-pack wired monitor. Requires AAA batteries. PM1 - Mono belt pack monitor. Designed to work with amplified signals, but can still work straight out the mixer in low noise environments. P16 - ULTRANET mixer/monitor. Used in conjunction with any compatible ULTRANET device (Such as; X Air Mixers, X32 mixers, M32 mixers, Wing Mixers)
the monitor output of my PRESONUS 24.4.2 mixer is plug 1/4, I have the cable .. but I only hear one side .. what should I do .. ??? I just bought 2 elite core
So when I go to a gig all I need is the pack, my earbuds, and the cable to connect to the djs mixer?? I’m new to iems so I’m trying to find out how to connect my stuff to someone else.
Do you think that this is a good set up if I'm playing out at different places, with different sound guys, with different equipment/ set ups? Because all this little pack is doing is taking place of the ol skool floor wedge right?
100% I have the Behringer P2 (allows xlr or 1/4") while the design is a little cheap and delicate, it enables me to not use a floor monitor anywhere that I play. Space saving and also prevents me blasting guests who may be seated near stage at corporate music events. I'm curious if Elite is any better or worse at the cheaper price point. I love being able to eliminate my wedge on stage. Also means less gear for me to carry.
If you use a Wireless IEM system you would already have a belt pack with a headphone output and a volume controller which means these units would not be required.
Hi can u use the pm1 on mixer phones output? With an xlr to quarter inch jack stereo? Just like ur cheap iem setup review using that elite core pack? Same wire and same setup?
I bought one of it and used it recently. The volume is too soft and even my wedge sounded way louder. I did turned up the volume knob for both mixer board and pm01 to max, however it's still very soft. My IEM is Shure 215. Any advice?
Use a headphone amp like the HA6000 or HA8000 (if multiple band members) then send it from there to the PM1. Or you can get the P2, but that requires batteries. For a battery free system I would use a HA6000 along with multiple PM1s 👍
@@theotandiara5869 Typically, to get more volume you either need a pre-amp with a powered headphone output and/or a lower-impedance headphone set. This unit does not boost your signal, just makes your setup more convenient. These units are not amplifiers.
can you connect xlr out from bass combo to xlr in PM1 and then mini jack from line out to line in laptop sound card? Will it be too loud for a laptop and not a mixer?
Because these devices are unamplified stereo devices and are designed to be run from a headphone amplifier. This is how I use it with TRS to XLR cables out of the headphone amp. It uses a standard XLR as a stereo connection (not to spec). The headphone amp stays in my rack. They are not meant to plug in a normal balanced output from your mixer but I do know many people that do it and just crank the volume on their output. To do it, you either need to use a custom stereo cable to get left and right from 2 outputs on your mixer, or use a mono adapter in the headphone jack to get the same mono signal to both ears.
I dont like these because they aren't powered. The PM2 is powered but sites were selling them for over $100 bucks and I said forget it. I bought the mackie mix8 to send out to multiple people and a voice recorder instead.
If you have an x32 desk or another digital desk you can mix the tracks on your phone and these devices work perfectly with just an overall volume control.
Do you use IEM Packs? If so, What kind? Let me know in the comments!
no I use a Jam Hub system it is really inexpensive been using it a while you can get 5 separate mixes...i use it for vocals, drums, 2 keyboards and bass...had it a few years now its a real good option for small churches with a 2 to 4 piece band
Herman Union I’m going to check this out
If these are passive (no pre-amp) why would one sound "louder"? -- unless the Behringer circuitry is causing some sound reduction.
A straight-through signal should be the same volume.
Perhaps you can describe your set-up and give a comparison of volume loss or gain when you bypass the Unit?
Hi can this be plugged into through an output socket on a snake box or does it go straight to the main desk? Thank you
0:31 - "This is the Behringer P1" (Literally says "PM1" when he turns it over).
This is so people don't get it confused with the actual P1 and wondering why they need 9volt batteries.
In case anyone is curious, Behringer has 4 options currently for in ear monitoring;
P1 - Stereo (or mono) belt-pack wired monitor (which can also be thread mounted to a mic stand). Requires 9 volt batteries.
P2 - Mono belt-pack wired monitor. Requires AAA batteries.
PM1 - Mono belt pack monitor. Designed to work with amplified signals, but can still work straight out the mixer in low noise environments.
P16 - ULTRANET mixer/monitor. Used in conjunction with any compatible ULTRANET device (Such as; X Air Mixers, X32 mixers, M32 mixers, Wing Mixers)
Thanks for turning me onto this Mike. I’ve been hating on the 1/8” extensions. I bought this kit right away. Right on 💪🏻
the monitor output of my PRESONUS 24.4.2 mixer is plug 1/4, I have the cable .. but I only hear one side .. what should I do .. ??? I just bought 2 elite core
So when I go to a gig all I need is the pack, my earbuds, and the cable to connect to the djs mixer?? I’m new to iems so I’m trying to find out how to connect my stuff to someone else.
Do you think that this is a good set up if I'm playing out at different places, with different sound guys, with different equipment/ set ups? Because all this little pack is doing is taking place of the ol skool floor wedge right?
Yup...that’s one of the reasons I got it as a portable setup so I can take my sound with me
100% I have the Behringer P2 (allows xlr or 1/4") while the design is a little cheap and delicate, it enables me to not use a floor monitor anywhere that I play. Space saving and also prevents me blasting guests who may be seated near stage at corporate music events. I'm curious if Elite is any better or worse at the cheaper price point. I love being able to eliminate my wedge on stage. Also means less gear for me to carry.
Thank's you really helped me to make a decision on buying one of them
Can you run this through an irig?
Behringer x32 is the budget model. I have mackie boards. I also have mixed on A&H digital boards and had Midas on site
Will they be enough if I'm taking the XLR cable of my vocals floor monitor and put it in one of these?
Should be
Yes
does behringer have this with 4 headphone out?
Hello where did you bought that headphone extender? I can't find some because mostly the products are the same as the IEMs jack.
Guitar center
Can you use a wireless mic system to make these wireles? Like a kevler adt 2.0?
If you use a Wireless IEM system you would already have a belt pack with a headphone output and a volume controller which means these units would not be required.
Hi can u use the pm1 on mixer phones output? With an xlr to quarter inch jack stereo? Just like ur cheap iem setup review using that elite core pack? Same wire and same setup?
Yup!
@@Johnmike thanks mike
that Mackie 1202 is a classic !!!
r u still using these ??
yup but in the studio for headphone mixes
I bought one of it and used it recently. The volume is too soft and even my wedge sounded way louder. I did turned up the volume knob for both mixer board and pm01 to max, however it's still very soft. My IEM is Shure 215. Any advice?
Use a headphone amp like the HA6000 or HA8000 (if multiple band members) then send it from there to the PM1. Or you can get the P2, but that requires batteries. For a battery free system I would use a HA6000 along with multiple PM1s 👍
If i useIf I use the HA400, can I get the maximum sound?
@@theotandiara5869 Typically, to get more volume you either need a pre-amp with a powered headphone output and/or a lower-impedance headphone set.
This unit does not boost your signal, just makes your setup more convenient. These units are not amplifiers.
can you connect xlr out from bass combo to xlr in PM1 and then mini jack from line out to line in laptop sound card? Will it be too loud for a laptop and not a mixer?
That would be a stretch...but it could work...the only real way to know is to try it
The pm1 is mono our stereo?
Mono
I think they need to be powered. Passive doesn’t give enough gain to me.
The p2 is battery powered
Don't forget they are designed to be used with a headphone amp such as the HA8000.
Thanks for the information.
Im using the behringer pm1, why am I only hear in the left channel of my headphones?
Because these devices are unamplified stereo devices and are designed to be run from a headphone amplifier. This is how I use it with TRS to XLR cables out of the headphone amp. It uses a standard XLR as a stereo connection (not to spec). The headphone amp stays in my rack. They are not meant to plug in a normal balanced output from your mixer but I do know many people that do it and just crank the volume on their output. To do it, you either need to use a custom stereo cable to get left and right from 2 outputs on your mixer, or use a mono adapter in the headphone jack to get the same mono signal to both ears.
Open it and turn the mono/stereo switch
@@mrwolfebeatbox can you open the elite core ?
What happen if you send to PM1stereo signal from XLR cable?
It will just come in stereo...the mono adapter is a solution only for those that use split audio signals
I dont like these because they aren't powered. The PM2 is powered but sites were selling them for over $100 bucks and I said forget it. I bought the mackie mix8 to send out to multiple people and a voice recorder instead.
It’s in Amazon now for $39 amzn.to/2Qm4eAG
P2 is battery powered and loud
If you have an x32 desk or another digital desk you can mix the tracks on your phone and these devices work perfectly with just an overall volume control.
Mackie 24/8 all day...... LOL
No, but my church wants to go to personal mixer system such as Aviom, behringer