Hello, maybe you can help me. I assembled clutch but its not pressed like on your video 26:35. It's not working, had assembled by your video, any ideas?
@@Andrey_Tarariew Or you have made a mistake or you have a wrong part, maybe the disk clutch is too thick. This clutch is quit simple, you should see what is wrong. When you pull the clutch you feel the tension of the springs or is solid?
@@Andrey_Tarariew That means something is wrong, if you have a solid feel for the clutch something is not ok. The bolts of the clutch with the springs are original?
Hi! Could you specify bearing type and number? Thanks
Hi! Bearing model is 16006RS.
🤝
Hello, maybe you can help me. I assembled clutch but its not pressed like on your video 26:35. It's not working, had assembled by your video, any ideas?
Or you have made an error or the fork is worn out and it is not pulling enough.
@@lznicu I restored all this parts. And them is in good condition
@@Andrey_Tarariew Or you have made a mistake or you have a wrong part, maybe the disk clutch is too thick. This clutch is quit simple, you should see what is wrong. When you pull the clutch you feel the tension of the springs or is solid?
@@lznicu on pulling clutch is absolute solid. I checked that is placing correct and not replacing during assembling
@@Andrey_Tarariew That means something is wrong, if you have a solid feel for the clutch something is not ok. The bolts of the clutch with the springs are original?