Life Hack BMX to prevent flat spray the inside of tire with flex seal the spray that you can use to patch holes in boats and roofs etc.They sell it at Walgreens Also scotch guard on the bottom of shoes outsideof riding gloves and on your tires it keeps water from collecting\sticking Its magical
Ola, if they have it in Norway you should try Lava soap instead of the sand. It contains pumice (which is abrasive) and won't destroy your plumbing like sand eventually will.
So when you accidentally get your foot caught in between the tire and the bar end, it wouldnt hurts as much, or so that your toe cant actually go in. Im surprised there isnt a "bar end" that is actually made to go there. lol
If you keep popping tires because of your spokes... tape black electrical tape over the inside of your spokes than put your rubber protecter back on. Fixxed
Your landlord isn't going to like you washing all that sand down the drain. Kids, don't wash sand down your parents drains at home, it will eventually clog the drain.
This isn't really a bmx hack but I guess it could help maybe. To clean ur chain just get 2 old brushes sticky tape them together then make the chain spin and finally put the chain inbetween the toothbrushes ur chain is now clean.
rocks/dirt in your forks.. take wheel off then empty rocks/dirt out of your forks then put tape in the forks cover up the holes of the downtube of the forks
Hvis jeg prøver å sykle baklengs på bmxen da må jeg trå på pedalene, å jeg ser at ikke du gjør det Ola. Har noen et tips om hvorfor og hva jeg kan gjøre. Ola det ville hvert fint hvis du også svarte
pipe cleaners work better then the shoelace does. instead of glue on the rim use rubbing alcohol to clean your rim and install soft pads. and dont put anything like pop or that on your rim, some of them have salt in them, salt corrodes aluminium also if your pads are old then remove them and feel the surface if it feels hard and like glazed over sand it down till it feels soft and fresh again. keeps your brake pads lasting longer. instead of removing that spacer and slimming it down you can use a flange from a grip inside the crank arm on one side of your cranks. if you set it up right itll prevent your cranks from spinning but wont make pedaling feel bad. flipping your stem doesnt necessarily make your bars taller, some frontload stems are designed to give you rise, if you flip it itll drop the bars. my personal hacks. for gyro users, derailer inner wires work as inners for dual lower cable set ups and are thinner and thus smoother. regular old school housing is smoother then linear housing so for gyros dont use linear housing. you can use v brake noodles for the bends on your lower cables. for levers if it hits your hand when you pull the lever, you can take a torch and heat the lever up and bend it with the closed end of a wrench, go slow. you can also do this to personal the shape. for dual lower gyro cables you can take a second london mod or dual cable adapter, remove the barrel adjusters and run your brake cable housing through it. then bolt it to the front most cable guide on your frame. use the rear one as normal. nor you have a dual cable guide to keep your cables looking nice and out of the way. this plus the v brake noodle mod keeps the housing running along time, whe the winners break just buy derailer inners, they are thinner and easier to break but because there are two of them the load is split so they work for gyros, just dont mash on the brake really hard. however because they are thinner and smoother it also means you need less spring tension to make your brakes spring back, meaning you can feather the break easier for manuals. meaning you only ever need 2 fingers at most. derailer inners are usually like 2$ or less in north america for basic ones. you can also get fancy teflon coated ones for even smoother brakes. if you notice you get alot of flats, take an old tube cut the valve stem off, split the tube up the belly side where the vale stem is(cut it through if need be to get at the belly easier) now you can wrap it around your entire tube before sticking it inside your tire, prevents lots of flats, can even help with pinch flats. if you run brakes, you can buy aluminium or titanium replacement bolts from bolt makers online. cheaper then bmx companies. you can aslo get shorter ones making it easier and faster to get your lever off. if you are worried about breaking a lever bolt just notch it under the head above the threads deep enough that its a thin spot, if it brakes youll have threads exposed above the lever so you can use pliers to get it out, shorter bolts make it quicker to remove. for those who brake alot of lever bolts. you can also get bolts with hex head keying all the way through so its hollow but if its brakes you can hammer an allen key in and remove it or go through the back of the lever. if you are concerned about weight or can find a 20 inch tube, take a 18inch or 16 inch and partially inflate it, and use that to get rolling. weight weenies do this along with light tires to remove rotational weight. helps with crazy spins. if you run brakes, when you bunny hop you can hold the lever and use pedal pressure to get your back end up really quick and easy. emergency hops. if you have thick dropouts like 8mm thick, you can take a frame guide thats removable for brake cables or a gyro tab and tap your drop out to add integrated chain tensionser. similar to how tree's lil buddy frame's chain tensioners worked. careful not to drill to deep. not recommended for beginners. if your headset or bb start feeling rough like gritty not smashed in, if you are planning to buy a new one try removing the seals and cleaning and re-greasing it first. it can make them last longer and bring them back from the dead.
All great advice. BUT PLEASE DO NOT PUT SAND DOWN THE DRAINS!!!!!!!!!!!!!!!! There is enough junk going down there from careless people already. Please throw the sandy water on your garden or just outside. Thanx. And your local water company thanx u 2. :¬)
I have been riding for 6 years now and I'm 13 I love getting high air when on jumps so when I'm not competing I will put tennis balls in the tires to get a better bunny hop and bounce
Holy crap ola, these hacks are the best ive seen so far. The idea with a dusty hub, pure genius. The bar end in the fork, EVEN BETTER. You are a massive inspiration for my bmx riding! Keep doing the crazy stuff you do!
To replace grips that have no lockrings put a screwdriver down old the grips and pour in a bit of pure alcohol then twist it off. if you use enough and do it quick you can just slide the new ones on and just twist till it drys up. loads better than zip ties put it that way lol
I like BMX Bike..i like this one can i give you one BMX bike..plsssss I have BMX but my frame is metal all. I am happy..i wish myself BMX original parts..thank you
I been riding bmx for 23 years. Another good way to put grips on is a shoe lace. fold 3 times length of grip. Slide grip on to position desired. Loop shoe lace around fingers and pull. Done, Dry grips on your bike and ready to ride. :)
the last bit were you to the bolt of thankyou soo much ola!!! you dont understand how much this has helped me omg!! its taken me so long to take this bolt of my profile to put a hub gaurd on!! your the man!!! much love!! safeeee
Can you come to the UK soon and come to Lake Farm skatepark it's open all the time and you don't need to pay to get there. there is no workers or security there
hmmm for the bottom brackets put the piece 2mm shortes or doesn't put the piece is the same. Without the piece bearings can't spin well because they are pressed. If you remove the piece you consume your bearings.
If you want your chain to be smooth riding, take if off, get a pan and put a candle in the pan and let is sit until it melts, then dip your chain in the hot wax and you will never hear you chain sqeek again. also helps if you have white wall tires and you are sick of all the grease from the chain staining your tires.
DON'T PUT GLUE ON YOUR RIMS. The applied glue heats up under friction braking and makes them more slippery, it's like a slimy gel coating when it gets hot again. Then you are left with hot glue crap all over the rims and pads. They squeak and takes a long time to remove it all again by hand. Never again.
If you buy a left side drive hub, and cant afford to buy new cranks to match, flip the cranks to their opposite side, SHIT! pedals are backwards! Time to get greasy and take your pedals apart to swap them! Good luck getting all the bearings back in, but shit works 100%, saves mad cash on cranks too.
Some of these are werid. like really werid. you don´t wanna use grip tape on the cranks because your messing up the cranks if you have colored or non black cranks and it´ll be werid trying to do crank arm grinds. If your having trouble landing whips or crank flips, look at your shoe and decide on weather or not you should get new ones or make your current shoes more bendy so you can grip the cranks a bit better. I´m not talking from experience but from observation and things that might help. I´m new to BMX and currently am trying to find a 28t sprocket so I don´t mess up my current one. As the previous owner put a 40t sprocket on the thing. It´s good for speed. I´m not gonna do BMX racing anytime soon but thanks for the life hacks.
Hi can you give me your lost parts of your bmx because I love bmx but I' don't have many to bay bmx I'm your fun &your my IDOL I love tricks please thinks!!!!!
dude...the shoelace thing has been around since the 80s.. if you modify the inner spacer on your bb and over tighten it, it will put too much side load on the bearings. they won't work properly, that's why it feels hard to spin the cranks. it will prematurely wear and damage your components. better off using the tube on the axle hack.
I'm just beginning to ride BMX from scooters and I really like the bike with the neochrome and purple wheels, can you put the parts used in the comments?
Hi sir im from the Philippines This is my fisrt time to watch about BMX bike because i bought a bike on my Tita and i fix it then i show it to my friend and they laugh because my bmx bike is not like their bmx bike. Their bike parts are expensive not like mine and i feel sad because of it and i said to my self that one day i also have a bike like yours. Ithink they laugh because idont know what is good parts and not good so i start to watch BMX parts to and i came here. Ihope you notice me sir Thankyou im Edwarren From Philippines💞
Free tip: Dont use sand to rub between your hands. You should put ground coffee in olive oil and rub your hands with that. Sand in sink is problem in long run.
hairspray. makes your rims more sticky=more braking power. also works for putting on new grips. with the hairspray the grips will just slip on the bars, when it dries they are on to stay till you get moisture unterneath the grips.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
At first I thought this was gonna be a rip off of Adam's vid, but props to you for giving credit where its due!
Yeah same
Rite on
Life Hack BMX to prevent flat spray the inside of tire with flex seal the spray that you can use to patch holes in boats and roofs etc.They sell it at Walgreens Also scotch guard on the bottom of shoes outsideof riding gloves and on your tires it keeps water from collecting\sticking Its magical
same
especially with the thumbnail
Bmx bar end hack - if you have an old plastic bar end that is stuck inside your bars you could take a wine bottle opener and twist it out 👍🏼👍🏼
Pete Iliopolos Now that's a good one!
you are a legend I spent like 30 minutes carving it out when I wish I wouldve just seen this lmao, next time..
A. Zak WW
Pete Iliopolos i do that a lot! :D
Pete Iliopolos ball
the last one is great .
🙌🏾🙌🏾
@@OlaSelsjord saved my friend today 4 years later
Ola, if they have it in Norway you should try Lava soap instead of the sand. It contains pumice (which is abrasive) and won't destroy your plumbing like sand eventually will.
Jason Parrish oryou could use salt
Also a good idea, because it disolves.
J. Parrish lol
Bro, that bar end in the forks...genuis!
😁🙌🏾
Zack Dugger I can't make that (odyssey r 32
I didn't understood the use of it. (Maybe my bad english)
So when you accidentally get your foot caught in between the tire and the bar end, it wouldnt hurts as much, or so that your toe cant actually go in.
Im surprised there isnt a "bar end" that is actually made to go there. lol
Sand down the drain is not a good idea kids.
Nah no its not...
jordan buscema use salt
@@codysaunders1205 lol, ur evil
I live in Florida we got sand everywhere, but its not a good idea to put sand down the drain. just hose ur hand out in the yard.
I was searching for this comment when I saw the sand.
I love your videos. I would love to see you, Harry Main, and Callum Bibby play a game of MAFIA. Let's see who the best MAFIA rider is.
Thats a sick idea!!🙌🏾🙌🏾
and Tom Justice also, he is the man
I have a scooter life hack throw it away
Juicy Jack I have a life hack for you. Don’t care about what people ride.
Ayyyy leave scooter riders alone I’m personally a bmx rider but I don’t have any problem with scooter riders
If you keep popping tires because of your spokes... tape black electrical tape over the inside of your spokes than put your rubber protecter back on. Fixxed
Also to stop your cranks spinning round you can put a grip on the tube that goes in between the BB!
Jack Mould or just use less grease
put innertube between the crank arm and the BB
Real men keep calluses on their hands. :)
Sheldon🥴
Nope
that glue hack is ace! cheers ola
Your landlord isn't going to like you washing all that sand down the drain.
Kids, don't wash sand down your parents drains at home, it will eventually clog the drain.
yeahh
COMO ASSIM, VOCE AQUI VX?
Such a great video!! So many innovative tips and tricks! Keep up the sick videos dude
Thanks bro!!🙌🏾🙌🏾
8:52 lol🤣🤣🤣🤣🤣
put brakes on so u don't tear ur shoe apart
SaiberTv pussy
@@codysaunders1205 you are
If you have braked ur a bitch
Cody Saunders I don’t like brakes, but chill Cody lmao
I would be dead right now if I didn’t have breaks plus I think it’s one of the things that make a bike
This isn't really a bmx hack but I guess it could help maybe. To clean ur chain just get 2 old brushes sticky tape them together then make the chain spin and finally put the chain inbetween the toothbrushes ur chain is now clean.
Rusty parts hack- if you have a rusty chain or bolts or other parts and you can’t offord new parts you could just soak them in Coca-Cola
rocks/dirt in your forks.. take wheel off then empty rocks/dirt out of your forks then put tape in the forks cover up the holes of the downtube of the forks
Hvis jeg prøver å sykle baklengs på bmxen da må jeg trå på pedalene, å jeg ser at ikke du gjør det Ola. Har noen et tips om hvorfor og hva jeg kan gjøre. Ola det ville hvert fint hvis du også svarte
THE GLUE STICK TRICK DOESEN`T WORK! THE BREAKS STICK ON TO THE FRAME AND SQUEEK
Saludos desde Argentina Chubut , gran video cracks
For sure gotta try washing my hands with sand trick! My hands are so dry and beat up haha
5:44 really helped
@ OlaBMX i watched the full tv edit of simple session last night your flair drop was in it!!!! i was so happy haha
Last hack with hub bearings is sooo simple but really helpful
pipe cleaners work better then the shoelace does.
instead of glue on the rim use rubbing alcohol to clean your rim and install soft pads. and dont put anything like pop or that on your rim, some of them have salt in them, salt corrodes aluminium
also if your pads are old then remove them and feel the surface if it feels hard and like glazed over sand it down till it feels soft and fresh again. keeps your brake pads lasting longer.
instead of removing that spacer and slimming it down you can use a flange from a grip inside the crank arm on one side of your cranks. if you set it up right itll prevent your cranks from spinning but wont make pedaling feel bad.
flipping your stem doesnt necessarily make your bars taller, some frontload stems are designed to give you rise, if you flip it itll drop the bars.
my personal hacks. for gyro users, derailer inner wires work as inners for dual lower cable set ups and are thinner and thus smoother. regular old school housing is smoother then linear housing so for gyros dont use linear housing. you can use v brake noodles for the bends on your lower cables.
for levers if it hits your hand when you pull the lever, you can take a torch and heat the lever up and bend it with the closed end of a wrench, go slow. you can also do this to personal the shape.
for dual lower gyro cables you can take a second london mod or dual cable adapter, remove the barrel adjusters and run your brake cable housing through it. then bolt it to the front most cable guide on your frame. use the rear one as normal. nor you have a dual cable guide to keep your cables looking nice and out of the way. this plus the v brake noodle mod keeps the housing running along time, whe the winners break just buy derailer inners, they are thinner and easier to break but because there are two of them the load is split so they work for gyros, just dont mash on the brake really hard. however because they are thinner and smoother it also means you need less spring tension to make your brakes spring back, meaning you can feather the break easier for manuals. meaning you only ever need 2 fingers at most. derailer inners are usually like 2$ or less in north america for basic ones. you can also get fancy teflon coated ones for even smoother brakes.
if you notice you get alot of flats, take an old tube cut the valve stem off, split the tube up the belly side where the vale stem is(cut it through if need be to get at the belly easier) now you can wrap it around your entire tube before sticking it inside your tire, prevents lots of flats, can even help with pinch flats.
if you run brakes, you can buy aluminium or titanium replacement bolts from bolt makers online. cheaper then bmx companies. you can aslo get shorter ones making it easier and faster to get your lever off. if you are worried about breaking a lever bolt just notch it under the head above the threads deep enough that its a thin spot, if it brakes youll have threads exposed above the lever so you can use pliers to get it out, shorter bolts make it quicker to remove. for those who brake alot of lever bolts. you can also get bolts with hex head keying all the way through so its hollow but if its brakes you can hammer an allen key in and remove it or go through the back of the lever.
if you are concerned about weight or can find a 20 inch tube, take a 18inch or 16 inch and partially inflate it, and use that to get rolling. weight weenies do this along with light tires to remove rotational weight. helps with crazy spins.
if you run brakes, when you bunny hop you can hold the lever and use pedal pressure to get your back end up really quick and easy. emergency hops.
if you have thick dropouts like 8mm thick, you can take a frame guide thats removable for brake cables or a gyro tab and tap your drop out to add integrated chain tensionser. similar to how tree's lil buddy frame's chain tensioners worked. careful not to drill to deep. not recommended for beginners.
if your headset or bb start feeling rough like gritty not smashed in, if you are planning to buy a new one try removing the seals and cleaning and re-greasing it first. it can make them last longer and bring them back from the dead.
🤣
You are a good bmxer but not a good youtuber
Cut out little rubber spacers out of your old tires and put them on your bb axle so your cranks don't move when you kick a whip round ect
All great advice. BUT PLEASE DO NOT PUT SAND DOWN THE DRAINS!!!!!!!!!!!!!!!!
There is enough junk going down there from careless people already.
Please throw the sandy water on your garden or just outside.
Thanx. And your local water company thanx u 2. :¬)
Got the Idea from ADAMLZ lol
Can someone tell me what size is the front tire? (minute 3:35)
Coexist. 20 inches
Not sure on the tyre.. but the wheel will most likely be 20" (inches)
he asked about the tyre not the wheel.
i have the same it's a demolition momentum tires 20x2,35 110 psi
It’s probably 20 inches
Hello from Russia!)
CHP0HANOVSKY thats my favorite race
🤪🙂🙂🙂🙂😎😎
I have been riding for 6 years now and I'm 13 I love getting high air when on jumps so when I'm not competing I will put tennis balls in the tires to get a better bunny hop and bounce
Jack Allen between the spokes or inside your tire wtf
Holy crap ola, these hacks are the best ive seen so far. The idea with a dusty hub, pure genius. The bar end in the fork, EVEN BETTER. You are a massive inspiration for my bmx riding! Keep doing the crazy stuff you do!
🔥🔥
Broo dubai was lit
Cool vid
U can put things in ur seat tube such as emergency money or supplies ; )
Ollie Crouch tanks
To replace grips that have no lockrings put a screwdriver down old the grips and pour in a bit of pure alcohol then twist it off. if you use enough and do it quick you can just slide the new ones on and just twist till it drys up. loads better than zip ties put it that way lol
amen on the hands part :D
🙌🏾
Nice bike man
I like BMX Bike..i like this one can i give you one BMX bike..plsssss
I have BMX but my frame is metal all.
I am happy..i wish myself BMX original parts..thank you
if you don't have a bottle of sand laying around you can use salt or sugar
Salt and sugar dissolves really fast in water leaving you with a crusty or sticky mess on your hands
Salt with some orange peel oil works
I been riding bmx for 23 years. Another good way to put grips on is a shoe lace. fold 3 times length of grip. Slide grip on to position desired. Loop shoe lace around fingers and pull. Done, Dry grips on your bike and ready to ride. :)
Which is the best bike in order?
Sunday Soundwave Gary Young BMX
WTP Envy
WTP Crysis
Stranger Level FC BMX Bike 2018
Haro Midway BMX Bike
thank u so much ima subscribe bro
🙌🏾🙌🏾
use an aircompresser to put on grips
the last bit were you to the bolt of thankyou soo much ola!!! you dont understand how much this has helped me omg!! its taken me so long to take this bolt of my profile to put a hub gaurd on!! your the man!!! much love!! safeeee
Yooo stoked to help bro!!🙌🏾🙌🏾
I do intend to use some of these BMX hacks! Thank you dude!
Can you come to the UK soon and come to Lake Farm skatepark it's open all the time and you don't need to pay to get there. there is no workers or security there
Is that his real voice?
Daygos Finest Photography I enjoy his videos, but his voice and facial expressions while speaking are aids..
is he from America?
hhahahha caleb chokes
he is from norway i think
xXDsesXx _ probably
When you ride in wet weather and the grips start move its annoying and you can't ride just duck tape it before the ride haha :D I do it all the tyme
hmmm for the bottom brackets put the piece 2mm shortes or doesn't put the piece is the same. Without the piece bearings can't spin well because they are pressed. If you remove the piece you consume your bearings.
Good Stuff Ola ! I use small leather belt pieces attached to my hubs and they shine the hubs while I ride.
I really want to get into BMX I really do. I just wish the average BMX guy didn’t always have to act so goofy
I just watched adam lz and his bike hack video last night. more hacks, YES!
If you want your chain to be smooth riding, take if off, get a pan and put a candle in the pan and let is sit until it melts, then dip your chain in the hot wax and you will never hear you chain sqeek again. also helps if you have white wall tires and you are sick of all the grease from the chain staining your tires.
I have a good life hack if your brakes sucks:
Drive the brakeless BMX
Its a beautiful bike cool..i like this wow grabeee😍😍😍🚴🚴
I made a front hub guard out of a piece of plastic (like an old number plate). Cut a donut shape and zip tie it to your spokes.
I used salt and washing up liquid instead of sand, plus it clean oil and dirt easily of I've been tinkering with the bike
The music was a little loud, but other than that good video.
DON'T PUT GLUE ON YOUR RIMS.
The applied glue heats up under friction braking and makes them more slippery, it's like a slimy gel coating when it gets hot again. Then you are left with hot glue crap all over the rims and pads. They squeak and takes a long time to remove it all again by hand. Never again.
Take some cable ties to put your grips on.
My hack is if you put nails in your tires youll get more traction
Second if you cut your chain youll get more speed
Hell yeah
omg #10 is going to help soooo much I never even thought of that ! thank you!!
giveaways pls.. pin it if you said yes but..... IT WAS A NICE VID ITS VERY USEFUL FOR ME!!👍👍😂
If you buy a left side drive hub, and cant afford to buy new cranks to match, flip the cranks to their opposite side, SHIT! pedals are backwards! Time to get greasy and take your pedals apart to swap them! Good luck getting all the bearings back in, but shit works 100%, saves mad cash on cranks too.
ola dont copy other youtubers content like a week after they do
bmx life hack- get a scooter..... jk
Hey! thats a great color scheme for ur bike!! Mine ia green with rasta bits too! Geniouses think the same
Some of these are werid. like really werid. you don´t wanna use grip tape on the cranks because your messing up the cranks if you have colored or non black cranks and it´ll be werid trying to do crank arm grinds. If your having trouble landing whips or crank flips, look at your shoe and decide on weather or not you should get new ones or make your current shoes more bendy so you can grip the cranks a bit better. I´m not talking from experience but from observation and things that might help. I´m new to BMX and currently am trying to find a 28t sprocket so I don´t mess up my current one. As the previous owner put a 40t sprocket on the thing. It´s good for speed. I´m not gonna do BMX racing anytime soon but thanks for the life hacks.
Hi can you give me your lost parts of your bmx because I love bmx but I' don't have many to bay bmx I'm your fun &your my IDOL I love tricks please thinks!!!!!
I wedge same size socket pieces between my back tire and frame on both sides to tighten the back wheel evenly
Nice video, thanks! And subbed :)
Thanks😍😍
dude...the shoelace thing has been around since the 80s.. if you modify the inner spacer on your bb and over tighten it, it will put too much side load on the bearings. they won't work properly, that's why it feels hard to spin the cranks. it will prematurely wear and damage your components. better off using the tube on the axle hack.
WD40 cleans brake shoes, and leaves them with a clean sticky surface. Try it out, it works PRO!
I'm just beginning to ride BMX from scooters and I really like the bike with the neochrome and purple wheels, can you put the parts used in the comments?
Hi sir im from the Philippines This is my fisrt time to watch about BMX bike because i bought a bike on my Tita and i fix it then i show it to my friend and they laugh because my bmx bike is not like their bmx bike. Their bike parts are expensive not like mine and i feel sad because of it and i said to my self that one day i also have a bike like yours. Ithink they laugh because idont know what is good parts and not good so i start to watch BMX parts to and i came here. Ihope you notice me sir Thankyou im Edwarren From Philippines💞
Funny and educational! Win-win! :D
😺😺
Heii broo Please help have one problem with bmx me ita Fake no have money FOR one bmx new 😥😥😥donate one bmx Please broo 😥😥
Like for braking a spoke for a TH-cam video
I've used my grips that I replaced with new ones and slide it over the crank arm softer impact on your ankles and the rubber grips very well
does the glue actually work?
Mechanic life hack! Stop using a wrench or you will destroy you bolts. Use a spanner or a ratchet insteed.
I like your life hacks bro i watched the whole video 🔥👊insta @702tolerance i
Number 10 was my favorite. I coulda have used that a bunch of times. lol
Hey, its a little bit complicated to understand when you are a french guy but the pictures helps a lot !!! Thanks !!
I don't ride BMX but I really enjoyed this video!
Thumbs Up!
Free tip: Dont use sand to rub between your hands. You should put ground coffee in olive oil and rub your hands with that. Sand in sink is problem in long run.
Here’s a tip, when rubbing hands with sand. Leave the water running beforehand to eliminate unnecessary cleaning of the tap/sink
first like comment and view
hairspray. makes your rims more sticky=more braking power. also works for putting on new grips. with the hairspray the grips will just slip on the bars, when it dries they are on to stay till you get moisture unterneath the grips.
hack no.2: foot keeps slipping from crank arm. solution: land on pedals. just kidding keep it up bro :D
the glue thing works my breaks are much better thank you
ola my name is jester patoy from zamboanga city philippines I don't have BMX
Thanks for that last hack dude suuper helpful*
I just subbed to LZ and after watching his video I was thinking are you guys rivals and then I watched this and it blew my mind
does anyone know how to make you bmx tick faster?
progression squad!