Gorgeous Rossin resto, great job. Not many people appreciate or are aware of the quality and history of Rossin frames. These are up there with Colnagos, Pinna’s and DeRosas of the era. Well done for saving this beautiful frame.
I took a break from restoring the Ural bicycle from the USSR, fighting an unequal battle with seized screws. I'm browsing the depths of the Internet and come across your recently uploaded video. Immediately the inspiration returned. Greetings from Poland.
I also have one Future projekt - obtained one old road frame. Haven't started yet, but as you say "good inspiration". I love the feelings when I finish. To give new life to sth what almost ended in scrapyard = Priceless❤
Good as new, another 30 years service. I always say the joy of cycling is only determined by the efficiency of the bike not how new it is or what its made out of.
Im kinda new to cycling, well actually I got back into it after 20 years, not to diminish your great work but there wasnt much to restore in the first place
I redid a handmade Bianchi. I love it. And yes, it was a quite old frame, 300 mm rear end. 100 mm front end. 7 speed and it is beautiful. I don't Miss A 12 speed . And yes, it's a steel frame. I love the steel.
Honestly I think every bike deserves to be repaired some see bikes as a tool or even there only form of transportation they are more the a recreational thing. Bikes are awesome.
Quality frame possibly an RLX from late 1980’s ? Well done for giving it life again. See you’ve changed it from 9 speed found on it to 11 speed for lower gearing and added the Hyperon wheels to make a neo-retro bike. Should make a lightweight high performance ride. 😃 👍
Very nice upgrade and restoration. I am doing something similar upgrading my 95 Marinoni from 8 speed Athena with other upgrade components to the beautiful silver 11 speed Centaur. Also going from Mavi Open Pros to Camapgnola Scirrocos.
When I started to see this video I thougth to myself " oh my god another beginner destroyeing a bike" but when I saw campagnolo groupset I said to myself "this man knows what it is doing" and rigth, he knows.
Great Video, I enjoyed very much that you displayed all steps in detail. One question to COMET: assuming that the original rear hub had a width of 126mm, you did have to widen the rear triangle in order to fit the 11s rear wheel hub, is that right? thx
Nice video. At 0:45 You are not obliged to take out the pin if you want to reuse the chain because it's qite difficult to plae it back in place. The best is to count the turns of screw that you give : approx. 4.5 turns to keep the pin just in the link. Maybe the bike is just too modern after in my opinion.
Beautiful work! Love the build. I have a question. I own a 2007 Lemond Buenos Aires road bike. Is it viable to put a modern 105 or Ultegra group set on it?
Is this a rhetorical question? This beauty has been barely used, so it is worth every single drop of sweat. Mix of Campy, Shimano and Suntour parts is typical for this period.
I see a lot of specialty tools being used I had to watch that bottom bracket come apart I was just waiting for the junk to come out. I have a lot of the tools I saw spanner wrenches etc. I don’t think new bikes even use anything like that anymore.
А смысл?Я понимаю если бы сохранилась оригинальная комплектация.А так,это новый groupset на старой стальной раме,которую внутри,уже скорее всего съела коррозия.
Cosmetically the frame didn’t need much but personally I would consider swapping everything out bar the frameset and headset maybe as a bit more than a ´tuneup’
Uncle gave me this bike when he got a new bike back in the 90’s. Rode it everywhere for years until the colored kids stole it from Burger King while I was eating.
So let's see. You took apart a great old bike and replaced perfectly good components with new components that don't match the frame. I'm not seeing the magic here. Neither a repair nor a restoration.
There’s quite a bug market for old(er) steel framed with a modern drivetrain. I ride one! It’s a 1985 Eddy Merckx with an STI Shimano group on it. I feel like I get the best of both worlds: that lovely springy ride from the frameset but the convenience of shifting from the hoods, better brakes and wider rubber.
Plus a) the existing components were mismatched, b) what’s to stop him reusing them on another project and c) that frame deserves a nice Campy gruppo. Have a great day!
Thank you for watching this video.
If you have any questions, please leave a comment.❤
Muy.buena.bicicleta
😂woo esta ñema ñema la 🚲 bici me facina así uyo clásica con componentes modernos Eeee ñio😅😂
Beautifull work.
What IS tool's name at 3'51 ?
Do you have a link for us to buy le red handelbar'cover at 12'12 ?
Thanks from France.
Gorgeous Rossin resto, great job. Not many people appreciate or are aware of the quality and history of Rossin frames. These are up there with Colnagos, Pinna’s and DeRosas of the era. Well done for saving this beautiful frame.
I took a break from restoring the Ural bicycle from the USSR, fighting an unequal battle with seized screws. I'm browsing the depths of the Internet and come across your recently uploaded video. Immediately the inspiration returned.
Greetings from Poland.
As Akella said in the Soviet cartoon: it was a good battle. I am now in the middle of the restoration of the 1959 V-33 "Tourist" made in the USSR.
I also have one Future projekt - obtained one old road frame. Haven't started yet, but as you say "good inspiration". I love the feelings when I finish. To give new life to sth what almost ended in scrapyard = Priceless❤
It was a great restoration, but I have never seen a bike produced with such quality materials in my life, it smells of quality 👍
What a beautiful bike, love the old steel frames so comfy rides
Good as new, another 30 years service. I always say the joy of cycling is only determined by the efficiency of the bike not how new it is or what its made out of.
Perfect groupset for a beautiful frame
Im kinda new to cycling, well actually I got back into it after 20 years, not to diminish your great work but there wasnt much to restore in the first place
Классный велосипед! Лайк. Обмотка руля прям красота, хочу себе такую же!
Beautiful restoration ❤
Complimenti ottimo lavoro 👋👋👋👏👏👏
Великолепная работа изумительное изделие тяжелый труд -- БРАВО ,
Beautifully crafted restoration, and your video editing is really good too! Those Hyperon wheels are sublime.
I redid a handmade Bianchi. I love it. And yes, it was a quite old frame, 300 mm rear end. 100 mm front end. 7 speed and it is beautiful. I don't Miss A 12 speed . And yes, it's a steel frame. I love the steel.
A 300mm rear end? That seems very unlikely.
I appreciate that you have no problem hitting something with a hammer 👌
Preciosa bici. Enhorabuena🎉 Cuadros de acero forever. Compartimos hobby. 😊
lovely rebuild as always. I'm so glad you didn't strip and repaint that awesome frame, but why didn't you reuse the crankset which is just fantastic?
Не деген керемет висипет болып шықты 👍
This is therapy.
Honestly I think every bike deserves to be repaired some see bikes as a tool or even there only form of transportation they are more the a recreational thing. Bikes are awesome.
Quality frame possibly an RLX from late 1980’s ? Well done for giving it life again. See you’ve changed it from 9 speed found on it to 11 speed for lower gearing and added the Hyperon wheels to make a neo-retro bike. Should make a lightweight high performance ride. 😃 👍
Very nice upgrade and restoration. I am doing something similar upgrading my 95 Marinoni from 8 speed Athena with other upgrade components to the beautiful silver 11 speed Centaur. Also going from Mavi Open Pros to Camapgnola Scirrocos.
When I started to see this video I thougth to myself " oh my god another beginner destroyeing a bike" but when I saw campagnolo groupset I said to myself "this man knows what it is doing" and rigth, he knows.
Beautiful bike! Great job! What bar tape did you use?
3:35 - A few minutes in and, wow, that's a diverse set of components.
I usually bin caged bearings for loose bearings also get more bearings installed as well.
Given that's a Rossin then yes of course its worth restoring. I have a couple with Potenza, nice machines.
Like any thi g from by gone days built to last love the old Raleigh bike Peugeot bikes I'm doing mine at the minute.great job all the best 😊
I have an old olmo I picked up years ago that had been resprayed badly I'm thinking of stripping all the components and redoing the paint and stickers
Cuánto peso la bicicleta ya restaurada?
Ya se extrañaban tus videos
Repair?! looked newer than all my bikes at the start 😅
Great Video, I enjoyed very much that you displayed all steps in detail. One question to COMET: assuming that the original rear hub had a width of 126mm, you did have to widen the rear triangle in order to fit the 11s rear wheel hub, is that right? thx
It didn’t look like he cold-set the frame, rather that he just spread the rear triangle apart enough for the 130mm rear hub. Pretty easy to do.
Bravo veske majstore.
Excellent video. Thank you. I would have named it 30Year Old Italian Bicycle - Upgrade. But nevertheless the content is superb.
😌
세상에 진짜 이쁘네요! 복원인가 싶었는데 생각보다 깨끗하고 관리가 잘된 차구나 하고 감탄하던 중 구동계 업글이었다니! ㅋㅋㅋ 근데 또 캄파가 잘어울리니 최고네요!
Una bellissima Bicicletta 🤩❤️
Can you do a fixed gear one? I really love fixed gear bikes because they're so simple and clean, no cables and brakes just plain bicycle.
If i get a chance, I will upload a video.
Nice video.
At 0:45 You are not obliged to take out the pin if you want to reuse the chain because it's qite difficult to plae it back in place.
The best is to count the turns of screw that you give : approx. 4.5 turns to keep the pin just in the link.
Maybe the bike is just too modern after in my opinion.
How is it possible, the condition of parts of the bike is nearly perfect after 30 years life. İt is really true, the quality is not expensive.
had to be campag for a beautiful italian frame 👌still think a rolls saddle maybe 🤔lovely restore 🚴wish I still had some of my old classics.
Beautiful work! Love the build. I have a question. I own a 2007 Lemond Buenos Aires road bike. Is it viable to put a modern 105 or Ultegra group set on it?
Yes
Nice 90s Bike 🤩
Is this a rhetorical question? This beauty has been barely used, so it is worth every single drop of sweat.
Mix of Campy, Shimano and Suntour parts is typical for this period.
Did you have to reset the rear dropouts to take the 130mm hub? Why did you remove the Columbus sticker? Why did you take out the headset races?
Definitely!
If it´s a premier set of Columbus tubing, yes, it´s worth restoring. Rgr
hhe should just make it into a fixed gear or something or add sti?
이건 예술작품이다..
I missed you so much😘🥲
Oh great 😊 i like it!
I see a lot of specialty tools being used I had to watch that bottom bracket come apart I was just waiting for the junk to come out. I have a lot of the tools I saw spanner wrenches etc. I don’t think new bikes even use anything like that anymore.
크리몰리 프레임~흔한 카본 프레임과는 확실히 다른 매력이 있네요. 구동계를 은색으로 했으면 더 멋졌을듯...
А смысл?Я понимаю если бы сохранилась оригинальная комплектация.А так,это новый groupset на старой стальной раме,которую внутри,уже скорее всего съела коррозия.
montaggio spettacolareeeee
Definitely worth
지금도 상태 좋은데요 30년 된거치면 관리 진짜 잘했네요
LEMBRE-SE !
ITENS DE SEGURANÇA, NÃO SE RESTAURA.
"SE MELHORA"
SEGURANÇA EM PRIMEIRO LUGAR.
Nice video.
Saludos!
More of a full tune up than a make over but nice additions regardless to make it beautiful again.
Cosmetically the frame didn’t need much but personally I would consider swapping everything out bar the frameset and headset maybe as a bit more than a ´tuneup’
Some ASMR goodness 😊
Yes worth it class bike
Amazing !!!!
What a beauty ❤
Che spettacolo
The old chainring was better? Why change it
The shape of that bike frame is like the manila animal jeprox😊🎉
От старого велосипеда осталась одна рама,это не реставрированный байк.Все компоненты новые.Это не восстановление,а реплика.
Gonna sell it?
Nice
Nice!
지금의 시마노가 정밀기계라면
저시절 캄파뇰로구동계는 예술품이였지
Where tf do you find those
Bisiklet aynakol mekanizma ve fren ayak sistemi eskisi oldukça iyidi onu kullansaydınız daha iyi olabilirdi eski parçalar daha kaliteliydi
도색 및 작업 문의는 네이버 '코멧공방' 검색부탁드립니다.
nice
NICE i want it
Before the bike I need to get the tools 😅
👍❤️
Linda demais
tops
👏👏👍
Great he cleaned a dusty bike
….and replaced pretty much everything on it
Hm,sehr originell ist das nicht. Jo, dem rennrad ein upgrade verpasst. An sich eine gute idee,aber das machen viele.
Any Rossin is worth fixing
😘
멋지내요
🎉
😮😮👍👍👍
Cantikkkkkkkkk❤❤❤❤
Will you please give away any road bikes please
Repair what?
Cassette looks dirty after the lube. You need parafin wax of cause
Hubiese cambiado el manillar por uno más cómodo
Uncle gave me this bike when he got a new bike back in the 90’s. Rode it everywhere for years until the colored kids stole it from Burger King while I was eating.
Emang sepedanya sudah bagus. 😂😂😂
Is your goal not to spend any $ because I woulda probably just replaced the bearings at least. But your very meticulous.
ㅡ..ㅡ 어디를 보면 30년된 자전거? 허위
No, send it to me please and thank you.
So let's see. You took apart a great old bike and replaced perfectly good components with new components that don't match the frame. I'm not seeing the magic here. Neither a repair nor a restoration.
There’s quite a bug market for old(er) steel framed with a modern drivetrain. I ride one! It’s a 1985 Eddy Merckx with an STI Shimano group on it. I feel like I get the best of both worlds: that lovely springy ride from the frameset but the convenience of shifting from the hoods, better brakes and wider rubber.
Plus a) the existing components were mismatched, b) what’s to stop him reusing them on another project and c) that frame deserves a nice Campy gruppo. Have a great day!
And not a communist grey looking carbon tube in sight.
Give me bike bro
Nope.