While the oil is draining, I let the engine cool down before I change the oil filter. I fill the new oil filter to the brim a few times, letting the oil soak into the media. If the oil filter is on an angle, I pour some of the oil back into the oil jug to be added to the oil fill hole later. This oil in the filter prevents or at least, minimizes a dry start after changing the oil. This is an important and easy step which will make your engine last longer. Adding an oil coating to the new gasket will prevent distorting the gasket and also make it easier to remove. When I was younger and had strong hands, I just hand tightened the new oil filter. Now, I tighten it by hand as much as possible (which isn't much) and then turn a total of 1/2 turn with a wrench. There is no need to over-tighten it. ALSO, be sure to check the old filter to make sure the gasket came off with it. If not, you will have two gaskets on the filter and they will leak. I always tighten the oil drain bolt with a torque wrench so that I don't strip the threads. I did that once when I was a kid and created a huge problem for myself. Lesson learned the hard way.
I always use an oil filter wrench on my Wrangler, just don't overtighten. I was not impressed when I took the wife's Liberty for an oil change(I didn't have time to do it myself). They didn't use a wrench so the filter got loose and leaked oil. When I checked the level a week later the oil was so low and I can turn the filter very easily with one hand.
I bought a jeep less than a week ago and I love it this helps make sure it's up to date on its service. Thanks guys
While the oil is draining, I let the engine cool down before I change the oil filter. I fill the new oil filter to the brim a few times, letting the oil soak into the media. If the oil filter is on an angle, I pour some of the oil back into the oil jug to be added to the oil fill hole later. This oil in the filter prevents or at least, minimizes a dry start after changing the oil. This is an important and easy step which will make your engine last longer.
Adding an oil coating to the new gasket will prevent distorting the gasket and also make it easier to remove.
When I was younger and had strong hands, I just hand tightened the new oil filter. Now, I tighten it by hand as much as possible (which isn't much) and then turn a total of 1/2 turn with a wrench. There is no need to over-tighten it. ALSO, be sure to check the old filter to make sure the gasket came off with it. If not, you will have two gaskets on the filter and they will leak.
I always tighten the oil drain bolt with a torque wrench so that I don't strip the threads. I did that once when I was a kid and created a huge problem for myself. Lesson learned the hard way.
Thank you very much. Do you have other shows showing plugs, brakes, belt and other tune up. Thank you again.
mmmm the valve tap that I know and love
I always use an oil filter wrench on my Wrangler, just don't overtighten. I was not impressed when I took the wife's Liberty for an oil change(I didn't have time to do it myself). They didn't use a wrench so the filter got loose and leaked oil. When I checked the level a week later the oil was so low and I can turn the filter very easily with one hand.
Thanks a lot mate , you just saved me 80 bucks at jiffy lube.
loved the burp!
DogsRule12 disgusting
Never put oil into a new filter myself, thanks
great help thanks!
Jeeze black asf...how many miles on that oil
The oil in my Jeep are like that after 1,000 miles. Jeep burns a lot of oil too.
Harbor Freight. Cheap gloves 🧤 just saying