Had same problem. Solution worked for me: 1)deinstall any python on PC ( i had 2.3 atd lates 3.xx). 2) delete pythonInterface plugin 3) installed Python 2.7. 4)Copy Python2.7.dll to windows/system32 folder 5) manually unzip pythonInterface plugin 7)created PythonScripts folder in plugin dir 8) manually unzipped noaa scripts
Thank you very much for the installation tips, obviously I didn't find this vid until I'd tried ( unsuccessfully for 2 hours) 'THE OTHER' method!!!! But hey, it's up and running now. Again, thanks very much. You make some good vids!!!
Remarks, (AO2) precipitation discriminator (snow or rain), (SLP124) sea level pressure 1012.4HPA, temp 15.6C, dewpoint 12.2C. Don't worry, I remember the days where I struggled to read them too, and there's still a lot that leaves me reviewing the AIM that doesn't pop up every time.
It was not something I had been used to with the remarks. Seen them a lot more now, and it's much better when reading them! Thank you very much though!
This worked when I first had X-Plane 11, stopped working after a while, best thing for me really as it rains mostly in the UK so I never got to see the True earth scenery for all that fog and rain clouds ;-)
looks like im having the same ISSUE as everybody else...ive installed it just as the way you showed in your video. I can see the addon in my plugins folder, but when going into xplane11, nothing has changed with my weather. HMMMMM....
Thanks for another X-Plane video. I tested this plugin few years ago and I was not big fan of it. The problem back then was the way it injected the weather. It did not use standard X-Plane weather injection, but it modified datarefs (something like internal variables) resulting weather at current location to be the weather present on entire planet. It had weird consequences like when flying at FL340 and tuning COM radio to ground ATIS, 80kts wind was reported on ground station. Upside of the plugin was more accurate weather, you just may need to be aware of above if it is still the case. I don't know if Zibo is pulling the weather from the sim, but my guess is it is using internet, so you may always get correct METAR. I have to admit, in my opinion there does not exist any weather injection/representation plugin of which value be adequate to its price. For now, I am sticking with X-Plane stock weather, which is good. I still hope HiFi Sim Tech with Active Sky will surprise us all, if they will ever release it.
It seems like that is no longer the case as far as I know. Last I tested Zibo seemed to pull the weather from the sim, which is why I think this plugin is now injecting weather to seperate weather stations. I do wonder how it will perform on the transitions though. I am looking forward to Active Sky for certain, but I would like to see what REX can do, too.
I installed it as you said like 5 times and it still never works. It just doesn't pop up in plugins when i start the simulation :( I Have FlightWithLua
@@Exmortus100 omg. I did it as you said and now it's working! Thanks sooo much! i think the problem was the absence of python27.dll in my sysWOW64 folder (since i'm on windows x64)
Its really strange, once I am done with the installer and launch XP11, the plugin does not show up in the Plugins Tab. All the files are in the right folders in the Xplane main directory... plugins... etc. Is anyone else having these problems?
SLP...Standard Lean Pressure..It is to do with the barometric pressure and Altitude pressure ("A"2990) Inches of mercury or in Europe your QNH. SLP is to do with this in relation to Standard Pressure sealevel 15Degress celsius........QNH 1013Kpsc 0r A 2992 inches of mercury. I was never taught exactly what it was or to use it when I learnt to fly..... RMK is any remark made after the RMK could be anything.....Usualy the cloud levels and cloud types.
I believe SLP may be Sea Level Pressure, would it not? Coming from an engineering background I never used the abbreviation for SLP, (using P0 instead), but I should have picked up on what that was trying to say. Thank you for the RMK explanation, I did not know that at the time of recording!
hey so i tried this and for some reason, the weather resets to clear skies every under a minute. I'm not sure if this is something you've had, but if you could help me with this that'd be great.
I _think_ this may now be broken, you are the second person to recently report issues on this. I no longer have XP11 installed though, so I am afraid I cannot check this for you!
Hi @ ECGadget. Do You know if this is still up to date as I'm no techie and I managed to get it in just fine but, now I see a lot of comments in XP forums about things changing lately within Python? I'm sure when I 1st put it in (about 2 months ago, now 12th May 2023) there was some 'red' text in the WX section of XP, I could be wrong however there isn't any longer? I'm using XP 11 55. Thanks for this and what you do!
Hello, I am afraid I do not know if this is up-to-date any longer. At one point I put a note on it saying 'No longer working' but I was then told it still does work. As far as I know though, this should still work with XP11. I no longer have XP11 installed so I cannot actually check for you either, sorry!
Hey man, nice tutorial! I can't get it to work, though. Everything but the XP NOAA plugin shows up in my Plugins. Also, the PythonInterface Plugin drops my FPS from 30 to below 10 (unusable). Any idea why this is, or how I can even make this plugin work? Thanks!
Hi, Is there anyway to stop the METAR visibility being injected at high altitudes? E.g. 6sm is cool close to ground but highly unrealistic at FL350. If I’m over a station with low reported ground vis, It injects it at cruise which causes horrible blue haze.
Hi, I downloaded it correctly, but it refresh the weather every minute, the cloud appear and disappear, and the wind is bugged, it change from left to right continuously. Any tip?
Possibly check the refresh rate of the weather? There should be a setting somewhere. I do not use this addon anymore (moved to ASXP) so I cannot recall all the options - the bugged wind is also due to the refresh I believe
Thanks for the video. What is the update rate on this weather engine. I want to move away from Sqwkbox's weather updates because sometimes it just disconnects and then if I connect again, I get this sudden weather rush that can cause my aircraft to overspeed and to crash. I had that with the Zibo update where I went overspeed and my engines caught fire.
I am afraid I am not sure how often it updates. I remember that it tried to smooth it out the weather. I have never had the 737 catch fire while flying though
@@ECGadget I find this plugin to be great however this engine gives extreme gust winds. So extreme that when I taxi the whole backside of my Zibo 737 lifts up. Too extreme to be even realistic.
Hi Sorry, but i've nothing at all in plugin in XP11. I used win installer. What is the issue ? Sorry if my english is not good, i'm french. Thanks in advance.
Hello there, I am not sure what the issue could be. Have you got FlyWithLua? That may be something you need to get first for it to work - I cannot remember!
its not clear weather...Simply because you have chosen Real time Weather...regardless if you choose clear weather or not...it comes down to the state your in..As Real time Weather...it will change when you arrive into another state ect: So sorry mate your Add-on isnt working..... Read all comments below..its not working... i know Because... it wasnt working for me...but until i selected Real time weather..with clear weather settings...it became cloudy............ Have A Great Day.
Had same problem. Solution worked for me: 1)deinstall any python on PC ( i had 2.3 atd lates 3.xx). 2) delete pythonInterface plugin 3) installed Python 2.7. 4)Copy Python2.7.dll to windows/system32 folder 5) manually unzip pythonInterface plugin 7)created PythonScripts folder in plugin dir 8) manually unzipped noaa scripts
I've just installed via Installer but at the plugins option, ı cannot see Python Interface.
Had same problem. Solution worked for me:
1)deinstall any python on PC ( i had 2.3 atd lates 3.xx).
2) delete pythonInterface plugin
3) installed Python 2.7.
4)Copy Python2.7.dll to windows/system32 folder
5) manually unzip pythonInterface plugin
7)created PythonScripts folder in plugin dir
8) manually unzipped noaa scripts
@@Malloriak can you send a link where i can find puthon 2.7
@@Malloriak thanks man!
@@Malloriak is it any good compare to asxp?
@@cutliss don't now. not used asxp .
Thanks for the video, the plugin works like a charm!!!
I am amazed, last I knew it was no longer working at all. But I am glad it works for you!
@@ECGadget nevermind after 3 days it stopped working :(
Thank you very much for the installation tips, obviously I didn't find this vid until I'd tried ( unsuccessfully for 2 hours) 'THE OTHER' method!!!! But hey, it's up and running now. Again, thanks very much. You make some good vids!!!
saved my life thanks for that nice tutorial
Remarks, (AO2) precipitation discriminator (snow or rain), (SLP124) sea level pressure 1012.4HPA, temp 15.6C, dewpoint 12.2C. Don't worry, I remember the days where I struggled to read them too, and there's still a lot that leaves me reviewing the AIM that doesn't pop up every time.
It was not something I had been used to with the remarks. Seen them a lot more now, and it's much better when reading them! Thank you very much though!
This worked when I first had X-Plane 11, stopped working after a while, best thing for me really as it rains mostly in the UK so I never got to see the True earth scenery for all that fog and rain clouds ;-)
Sadly I have a feeling this no longer works, as you said. ActiveSkyXP is a far superior replacement though - albeit payware
@@ECGadget yeah not a bad price ...actually more expensive that the full sim :D. But iknow i will end buying it lol
looks like im having the same ISSUE as everybody else...ive installed it just as the way you showed in your video.
I can see the addon in my plugins folder, but when going into xplane11, nothing has changed with my weather. HMMMMM....
Same here. Isn't working for me even though I installed it as he showed
Thanks for another X-Plane video. I tested this plugin few years ago and I was not big fan of it. The problem back then was the way it injected the weather. It did not use standard X-Plane weather injection, but it modified datarefs (something like internal variables) resulting weather at current location to be the weather present on entire planet. It had weird consequences like when flying at FL340 and tuning COM radio to ground ATIS, 80kts wind was reported on ground station. Upside of the plugin was more accurate weather, you just may need to be aware of above if it is still the case. I don't know if Zibo is pulling the weather from the sim, but my guess is it is using internet, so you may always get correct METAR.
I have to admit, in my opinion there does not exist any weather injection/representation plugin of which value be adequate to its price. For now, I am sticking with X-Plane stock weather, which is good. I still hope HiFi Sim Tech with Active Sky will surprise us all, if they will ever release it.
It seems like that is no longer the case as far as I know. Last I tested Zibo seemed to pull the weather from the sim, which is why I think this plugin is now injecting weather to seperate weather stations. I do wonder how it will perform on the transitions though.
I am looking forward to Active Sky for certain, but I would like to see what REX can do, too.
Well done, good job!
I installed it as you said like 5 times and it still never works. It just doesn't pop up in plugins when i start the simulation :(
I Have FlightWithLua
same here
I have a feeling this does not work in the latest version of XP11. I have noticed a few people comment with the same issue...
@@ECGadget that sucks
I had the same problem. Manually download python 2.7 64bit and install it and make sure there is a python27.dll in your windows/system 32 folder.
@@Exmortus100 omg. I did it as you said and now it's working! Thanks sooo much! i think the problem was the absence of python27.dll in my sysWOW64 folder (since i'm on windows x64)
Thanks soo much!!! Default x-plane weather engine is a nightmare.
You are welcome!
Very very useful, my friend... ty!!!
You are very welcome!
THX for the tutorial!
You are welcome!
A2990 = Altimeter 29.90 .... USA settings for Altimeter
I figured that out, but thank you kindly!
Its really strange, once I am done with the installer and launch XP11, the plugin does not show up in the Plugins Tab.
All the files are in the right folders in the Xplane main directory... plugins... etc. Is anyone else having these problems?
also having this problem
A2990 is the altimeter setting for USA and Canada
ijust download this plugin and ihave an issue it says data not ready please wait,anyone can help how to fix it? 😢
Funny how it is saying it doesn't work anymore, i just downloaded it and it works like a charm
Oh? Last check I had it was not working. Perhaps I should recheck it, may have been fixed with the latest XP11 update. Thank you for letting me know!
good vid, helped, had a laff
When I try to connect to XSquawkBox it says I have not reliable ran real-time for to long please help
SLP...Standard Lean Pressure..It is to do with the barometric pressure and Altitude pressure ("A"2990) Inches of mercury or in Europe your QNH. SLP is to do with this in relation to Standard Pressure sealevel 15Degress celsius........QNH 1013Kpsc 0r A 2992 inches of mercury. I was never taught exactly what it was or to use it when I learnt to fly..... RMK is any remark made after the RMK could be anything.....Usualy the cloud levels and cloud types.
I believe SLP may be Sea Level Pressure, would it not? Coming from an engineering background I never used the abbreviation for SLP, (using P0 instead), but I should have picked up on what that was trying to say. Thank you for the RMK explanation, I did not know that at the time of recording!
I installed it but still I can see the weather clear
This addon may no longer work - I have noticed that some comments have said it works, others have said it does not
A2990 is the qnh in the usa they use inches mercury and europe use hpa
What really is a nightmare is using windows vista with explorer!
But still great tutorial
Windows Seven actually!
hey so i tried this and for some reason, the weather resets to clear skies every under a minute. I'm not sure if this is something you've had, but if you could help me with this that'd be great.
I _think_ this may now be broken, you are the second person to recently report issues on this. I no longer have XP11 installed though, so I am afraid I cannot check this for you!
Found a fix for this? I’m having the same issues
Hi @ ECGadget. Do You know if this is still up to date as I'm no techie and I managed to get it in just fine but, now I see a lot of comments in XP forums about things changing lately within Python? I'm sure when I 1st put it in (about 2 months ago, now 12th May 2023) there was some 'red' text in the WX section of XP, I could be wrong however there isn't any longer? I'm using XP 11 55. Thanks for this and what you do!
Hello,
I am afraid I do not know if this is up-to-date any longer. At one point I put a note on it saying 'No longer working' but I was then told it still does work. As far as I know though, this should still work with XP11. I no longer have XP11 installed so I cannot actually check for you either, sorry!
@@ECGadget Thanks for the reply, it's appreciated. I'll keep looking in the forums. Thanks again, Mark.
So it works for me but i don't have sound anymore, what could be the issue?
I am unsure on that, I would not have expected this to impact sound at all...
Hey man, nice tutorial! I can't get it to work, though. Everything but the XP NOAA plugin shows up in my Plugins. Also, the PythonInterface Plugin drops my FPS from 30 to below 10 (unusable). Any idea why this is, or how I can even make this plugin work? Thanks!
Do you have the latest version of FlyWithLua? It may need that!
@@ECGadget ok, I'll try when I get home
same for me, even the pythoninterface isn't even visible. Anyone an idea?
Hi, Is there anyway to stop the METAR visibility being injected at high altitudes? E.g. 6sm is cool close to ground but highly unrealistic at FL350. If I’m over a station with low reported ground vis, It injects it at cruise which causes horrible blue haze.
I am afraid I am not sure how to do that, sorry!
Does SkyMaxx cancel the NOAA Weather Plugin? I have SkyMaxx and can't see the NOAA plugin on the XPlane menu.
I am afraid I am not sure, but I would not have thought it would.
@@ECGadget Ok, thank you. I'll do some troubleshooting. Fun!
@@ECGadget despite this video being over 2 years old you're still responding. I respect that!
can it rain using this plugin?
Hi, I downloaded it correctly, but it refresh the weather every minute, the cloud appear and disappear, and the wind is bugged, it change from left to right continuously. Any tip?
Possibly check the refresh rate of the weather? There should be a setting somewhere. I do not use this addon anymore (moved to ASXP) so I cannot recall all the options - the bugged wind is also due to the refresh I believe
ECGadget I found the problem. I had this problem because IVAO weather was on with XNOAA weather. Now it works nicely 😂🤦🏻♂️
Does it work Good in flight because this video only shows when you are on the ground
Works absolutely fine
Does someone know if I can use these METAR files in PFPX to display the weather correctly?
I am afraid I do not know
I cant find Noaa weather folder in plugin bar...Please help
Double check to make sure it is installed properly. Usually that means that the installation was incorrect at some point
same, not appearing on plugins menu
Thanks for the video. What is the update rate on this weather engine. I want to move away from Sqwkbox's weather updates because sometimes it just disconnects and then if I connect again, I get this sudden weather rush that can cause my aircraft to overspeed and to crash. I had that with the Zibo update where I went overspeed and my engines caught fire.
I am afraid I am not sure how often it updates. I remember that it tried to smooth it out the weather. I have never had the 737 catch fire while flying though
@@ECGadget I find this plugin to be great however this engine gives extreme gust winds. So extreme that when I taxi the whole backside of my Zibo 737 lifts up. Too extreme to be even realistic.
Hi
Sorry, but i've nothing at all in plugin in XP11.
I used win installer.
What is the issue ?
Sorry if my english is not good, i'm french.
Thanks in advance.
Hello there,
I am not sure what the issue could be. Have you got FlyWithLua? That may be something you need to get first for it to work - I cannot remember!
@@ECGadget Hi
thanks for your answer.
I have FlyWithLua.
i don't understand why it doesn't work.
Real world weather seems really good.
its not clear weather...Simply because you have chosen
Real time Weather...regardless if you choose clear weather or not...it comes down to the state your in..As Real time
Weather...it will change when you arrive into another state ect:
So sorry mate your Add-on isnt working..... Read all comments below..its not working... i know Because... it wasnt working for me...but until i selected
Real time weather..with clear weather settings...it became cloudy............ Have A Great Day.
When I tune ATIS in they dont respond. Any ideas?
I am not sure how ATIS respond now in X-Plane 11. I avoid the ATC in this title
Does not work any longer.
Really?
where i can download Python instaler??
Information all in the description box
does not work for me installs but does not show in game
Had same problem. Solution worked for me:
1)deinstall any python on PC ( i had 2.3 atd lates 3.xx).
2) delete pythonInterface plugin
3) installed Python 2.7.
4)Copy Python2.7.dll to windows/system32 folder
5) manually unzip pythonInterface plugin
7)created PythonScripts folder in plugin dir
8) manually unzipped noaa scripts
@@Malloriak where do you find the Python2.7.dll file?
@@joliet741 at Python installation folder
@@Malloriak thanks m8
@@joliet741 but be careful. Python 3 will not work
A2990 is altimeter setting