On the sea doo trophy 2022 it comes with a farming 7 inch navigation system CAN I change the stock 7 inch gram in to the bigger 9 inch model would it fit and sit right ? 🙏😀
Hi I have a 2020 Seadoo fish pro . 2 things how do you set the transponder to 15 . Because mine was set to 20 in Australia. And how do you keep the Garmin on when the ski is off , it only stays on fo a couple of minutes. Thanks .. 😃👍🇦🇺🇺🇸
Hi, it’s definitely worth selecting GT15, in the Garmin settings under Transducer it will allow you to scroll through and select GT15, call Garmin support in Aus if having difficulty or you don’t have your owners manual. If you leave your lanyard connected, the sounder should still stay on once the engine is shut off. Otherwise ti leave the sounder on your dealer could bypass the accessories circuit to an auxiliary battery supply.
I just received my new Seadoo Sport but my Garmin, when selecting Sonar, says that the transducer is disconnected. I have removed the unit and plugged in again but same message. Not sure what else to try?
Some have had the plug on the back of the panel not connected properly or the plug installed up side down. It would be best to take the unit back to your Sea-Doo dealer to check.
The 2022 Seadoo Switch I ordered says the Garmin GPS 7 inch touchscreen comes standard. Is the depth finder and fish finder also on there or do I have to add that to it, thanks!
@@jeffreycrowe6250 wow expensive for that lower end unit. I am very surprised it didn't come with a depth reader?? ! It's my neighbors new family play boat. I am an avid angler teaching a new boater and the 21ft 230hp Switch is sweet for family outings but the fishing rig up will be tricky. Like where to mount transducer, trolling motor, TM batteries, rod holders, etc.
@@jetskifishingok, thank so much. I’m planning on buying the sport model this year sometime and really can’t wait to fish on it. It’ll be my very first watercraft
I have a fish pro 2021. Can I change out the display screen to 73 cv (touch screen) without changing the transducer? And if I would like to change the transducer, where can I find it? And does it use the same wires? Thank you
Yes you can change the Garmin to the 7” version, you will need to change the wiring though as the plugs are 8 pin, instead of 4. Providing you purchase a Garmin that is compatible with the existing transducer, you will only have to get a wiring adapter.
@@jetskifishing Yes, I just got a Fish Pro last summer and loving it. I'm not very familiar with Fish Finders or Transducers. So I was curious if it was possible to get Live View on it.
@@jasonn.1089 that great you have a FISH PRO too, they have been hugely popular! If you are on Facebook join the Owners Group m.facebook.com/groups/299225924109023/?tsid=0.05207063359133968&source=result you can find lots of information about the FISH PRO and features available 👍
That video was very useful thanks. Why can I only see the bottom 30ft or so of my sounder when I'm in 150 ft of water, how do I change it to see the whole lot? Cheers.
If you have the Garmin 62CV it should pick up at least 150 ft. Either your transducer is not performing correctly or you should do a factory reset on the Garmin unit in case you have incorrectly adjusted a setting.
Only if the transducer is installed externally. The FISH PRO has water temperature in the factory gauge cluster menu, you may also have that feature on your GTX
Sure can, I use that feature all the time. There is a button that says Mark, just push it once and it marks the location with an icon of your choice on the display.
Your local Sea-Doo dealer should be able to service it, if you are on Facebook join the FISH PRO Owners Group for lots helpful tips facebook.com/groups/299225924109023
hey man i have a seadoo fish pro 2019, but the gps screen is missing, Id like to buy one but there are 2 garmin 62cv, one thats 500$ and one thats 870$, would they both work?
This model is the Garmin 62CV, it comes complete with the Sea-Doo FISH PRO, factory fitted. You can purchase it from Garmin retailers if it is what you are after👍
Good to know. I just purchased 2 Seadoo Fish Pro Trophies. I will need to learn how to use these.
Just took out mine for the first ride yesterday worth every penny
Just got a '23 Fish Pro Sport two days ago. I've never used a fish finder before. Thank you for this video.
How exciting for you, pleased to be of help. Enjoy your Sea-Doo FISH PRO 👍
Big shout out for this. Could use some more tips but this was huge and I can't thank you enough. Get my fish pro in April.
Exciting to hear you are getting a new one, you will get a lot of enjoyment fishing off it 😀
On the sea doo trophy 2022 it comes with a farming 7 inch navigation system CAN I change the stock 7 inch gram in to the bigger 9 inch model would it fit and sit right ? 🙏😀
I always wondered how those work. Thanks for video 👍
Dallas’s knowledge and experience should be really helpful for our FISH PRO Owners 👍
Hi I have a 2020 Seadoo fish pro . 2 things how do you set the transponder to 15 . Because mine was set to 20 in Australia. And how do you keep the Garmin on when the ski is off , it only stays on fo a couple of minutes. Thanks .. 😃👍🇦🇺🇺🇸
Hi, it’s definitely worth selecting GT15, in the Garmin settings under Transducer it will allow you to scroll through and select GT15, call Garmin support in Aus if having difficulty or you don’t have your owners manual. If you leave your lanyard connected, the sounder should still stay on once the engine is shut off. Otherwise ti leave the sounder on your dealer could bypass the accessories circuit to an auxiliary battery supply.
@@jetskifishing that’s great advice thank you.😃👍
I just received my new Seadoo Sport but my Garmin, when selecting Sonar, says that the transducer is disconnected. I have removed the unit and plugged in again but same message. Not sure what else to try?
Some have had the plug on the back of the panel not connected properly or the plug installed up side down. It would be best to take the unit back to your Sea-Doo dealer to check.
How about way points and getting home and to fish spots, Just bought a 24 fish pro trophy I pick it up in a few weeks. Thank you.
Waypoints are easy, just use the Mark button. Tracks should automatically be tracking your route…
Hi where I can buy this device and how I can know the size of the fish from the screen
what GPS coordinates do you enter? DMS DM or DD?
They should have been updated to touch screen on the 2021 models.
Is the transducer already fitted on the fishpro trophy on delivery?
Yes it is, there is a GT15 in hull transducer fitted
The 2022 Seadoo Switch I ordered says the Garmin GPS 7 inch touchscreen comes standard. Is the depth finder and fish finder also on there or do I have to add that to it, thanks!
I personally haven’t used a Switch yet, I’m expecting if it has the 72SV Garmin, it will include Navigation and the depth sounder.
It doesn't come with a transducer ☹️
@@yellostallion yes thanks, had to go buy a transducer for it. You're correct
@@jetskifishing I had to go buy a transducer for it. Like 320.00 from Seadoo 🙄
@@jeffreycrowe6250 wow expensive for that lower end unit. I am very surprised it didn't come with a depth reader?? ! It's my neighbors new family play boat. I am an avid angler teaching a new boater and the 21ft 230hp Switch is sweet for family outings but the fishing rig up will be tricky. Like where to mount transducer, trolling motor, TM batteries, rod holders, etc.
Is this the same unit in the 22 sea doo trophy? Thanks. By way great review
The Trophy had the 7” version, it also includes touch screen. They operate very similar…
Can this fish finder see your line/bait on the screen when targeting fish?
On the standard settings you should be able to view your bait sinking through the water column.
@@jetskifishingok, thank so much. I’m planning on buying the sport model this year sometime and really can’t wait to fish on it. It’ll be my very first watercraft
I have a fish pro 2021. Can I change out the display screen to 73 cv (touch screen) without changing the transducer? And if I would like to change the transducer, where can I find it? And does it use the same wires? Thank you
Yes you can change the Garmin to the 7” version, you will need to change the wiring though as the plugs are 8 pin, instead of 4. Providing you purchase a Garmin that is compatible with the existing transducer, you will only have to get a wiring adapter.
Man, that was a huge help. Thank you for that video Andrew. Do you know how we could get Live view to work?
Pleased to hear you found it helpful. Do you already own a FISH PRO?
@@jetskifishing Yes, I just got a Fish Pro last summer and loving it. I'm not very familiar with Fish Finders or Transducers. So I was curious if it was possible to get Live View on it.
@@jasonn.1089 that great you have a FISH PRO too, they have been hugely popular! If you are on Facebook join the Owners Group m.facebook.com/groups/299225924109023/?tsid=0.05207063359133968&source=result you can find lots of information about the FISH PRO and features available 👍
That video was very useful thanks.
Why can I only see the bottom 30ft or so of my sounder when I'm in 150 ft of water, how do I change it to see the whole lot? Cheers.
If you have the Garmin 62CV it should pick up at least 150 ft. Either your transducer is not performing correctly or you should do a factory reset on the Garmin unit in case you have incorrectly adjusted a setting.
@@jetskifishing Thanks very much, the reset did the job.🍻👍
@@flippa1976 that’s great to hear, enjoy your fishing!
where to buy a nautical chart of this sonar according to my region
Garmin Stockists should offer the local area G2 and G3/HD Charts in store or otherwise you can download online at the Garmin website.
@@jetskifishing ok
I wonder if their west coast map covers Hawaii?
Check with your local dealer to see what G3 version Garmin mapping covers for your region.
Why when I turn on my fish finder on my 2022 it's stays lit for about 2 minutes then turns dark what is the issue with it
It has a dark mode for early morning brightness. Either you have it switched on or could need resetting
Set to factory defaults settings to diagnose
@@jetskifishing another question sir how deep can it go for the fish finder and what setting would I look under I need about 150ft if possible
@@ryandaroach2553 you will easily get 300 plus feet!
@@jetskifishing what setting would that be under
@@ryandaroach2553 2 mins 25 seconds in the video, Dallas talks about sonar. That is the screen that shows you how deep you are fishing.
I have a 2021 GTX 170. will this unit give water temperature ?
Only if the transducer is installed externally. The FISH PRO has water temperature in the factory gauge cluster menu, you may also have that feature on your GTX
Can you mark your location, say you want to return to a spot you fished in the past.
Sure can, I use that feature all the time. There is a button that says Mark, just push it once and it marks the location with an icon of your choice on the display.
@@jetskifishing nice, thanks a lot enjoy.
Mine has stopped reading depth and bottom after one year any idea how to fix it?
Your local Sea-Doo dealer should be able to service it, if you are on Facebook join the FISH PRO Owners Group for lots helpful tips facebook.com/groups/299225924109023
hey man i have a seadoo fish pro 2019, but the gps screen is missing, Id like to buy one but there are 2 garmin 62cv, one thats 500$ and one thats 870$, would they both work?
The 62CV is what you should have, are you sure the more expensive version isn’t the 62SV?
Hi have Same fish finder but cat not Measure how much is deep is give me only like this -:- M . Can someone one help me to solve this problem ?
Hi, what are you referring to, is it that you are wanting to read depth in metres instead of feet? If so you need to go to the menu, units settings…
Can you load me the map/card too
This GPS price?
This model is the Garmin 62CV, it comes complete with the Sea-Doo FISH PRO, factory fitted. You can purchase it from Garmin retailers if it is what you are after👍