I think the pvc tape hanger has room for a little improvement. If you use two different diameter pipes of the same length and slide one into the other. You can slide as many tape rolls as you need over to one side or the other and pull the pipes apart to take a roll of tape without having to take all the rolls of tape off to get to the one you want.
A cheaper and safer alternative to your first tip is to buy a seat belt adapter for your dog/cat's collar or harness. You can find them on eBay for under $5 or make your own with an old seat belt latch and leash clasp. This has the added advantage of keeping your pet safer in the event of a crash and allows you to have the back windows down for them to get plenty of fresh air.
The idea using glued on sandpaper can also be used by folks who can't reach their feet but want to have a way to keep foot calluses smoothed down. Use a fine grit sandpaper and hot glue and replace the sandpaper as it wears. This would be a handy, diy pumice stone like device.
Some good ideas here to build on. The sink strainer lifter would store more easily with a tee on the end. Extending the shoe horn handle (and adding a tee?) would be great for folks with mobility issues and can't bend/stretch to their feet.
LOL!!!! MY BABY will be 14 YEARS OLD TOMORROW, NOV. 3!! We have been together since Dec.24, 2005. She's always had a harness, secured to the passenger seat headrest by a leash, short enough that she won't hit the dash or windshield due to a sudden stop. She used to have a Tinkerbell child-sized stuffed chair wedged between the seats of our Suzuki Sidekick where she rode high enough to see all of the exterior surroundings and safely secured to the headrest. After we got our mini van she now has pillows so she can see out and enjoy the panoramic view from the passenger seat. She's never been in the back seat and she's NEVER ridden without being safely secured. At 8# my little Chihuahua would easily be able to go between the PVC openings. ANY PET OWNER who does not SAFELY SECURE their PET is TOTALLY IRRESPONSIBLE and SHOULD NOT HAVE PETS. PETS, CHILDREN and ADULTS who are NOT SAFELY SECURED become PROJECTILES at UNDER 15 mph and WILL BE SMASHED AGAINST WINDSHIELD OR DASHBOARD resulting in CRITICAL INJURIES OR DEATH BY A SUDDEN STOP. . Speeds above 15 mph will FLING passengers through windshields and door windows. PLEASE, do not encourage IRRESPONSIBLE HUMANS how to keep their PETS and KIDS from climbing into the front seat by installing a PVC barrier. THANK-YOU.
I've been binge watching your videos ever since I found them! OK, on Idea #5, the shoe-horn... You can make the handle about 2 1/2 feet long, and you don't have to bend down to use the shoe-horn. Put a 1/2" hole on the handle end and you can hang it on a coat-hook above your shoe-rack.
A workshop's necessities: PVC pipe, duct tape, binder clips of all sizes, WD40, and cable ties. These will handle most of the problems that pop up. Great series of vids.
I enjoyed this one especially the one with the strut. I'm not quite sure but a similar trick could possibly be applied with camper tops that have worn out/torn up?
If you ever, (and I hope you do), put out a book, (or maybe even an ebook), of all the pvc hacks you have shared, pleasel let us know. Today, I personally needed the shoe horn, curtain rod, and sink-stopper removal; I certainly could have used the screwdriver one when putting things together, but I'll know in the future, as well as the plug-reach tip! I know I haven't seen them all, and I forget alot of what I 'have' seen. A book would be SO appreciated! Fair thee well!
The sanding idea is great, but I would think you could add add a tee joint so you don't sand your knuckles as well, especially if you sand paper on both ends!
Here is an idea... I guess "arm knitting" with super thick yarn is all the rage now. I saw an idea to use 1 1/2 inch PVC for the needles, and I have two pieces of it in 24" lengths. They suggested duct tape for fashioning the tips/points, but I could use some expert advice on making tips that are both sturdy and will stay on the PVC. I have couplers for the end to keep the yarn from sliding off.
Niffty idea with the "strut" brace, not sure if that's what they're called but, if you wipe the pistons down with W-D 40 BEFORE they go bad, you won't have to worry about hacking up your PVC. Just a little preventive maintenance goes a long way.
Oh yeah... even if it's just icky dish water, which I hate reaching into to unplug. I'm sure I make the most hilarious faces while lowering my hand into the bacteria filled water!!!
good job on the video I enjoy the ideas u come up with or show it actually inspired me to make a soccer net for my kids using recycled plastic bottles for the net
The goal turned out fine but it was my first time reusing a plastic bottle so the net wasnt the best but when they watched me finish it they did know what I was trying to do
I used the undersink curtain idea but had to bend the PVC to a 90 and hang a shower curtain from it to cover the hole in the corner of my basement where the sump pump lives.
That last one you did (the one with the car), I thought my dad was the only one that did that. Its cool to see that there are more people that do that too
GOSTO MUITO DE ASSISTIR SEUS VIDIOS..PENA QUE NÃO ENTENDO NADA QUE FALA...SOU BRASILEIRA E NÃO SEI FALAR SUA LINGUA..MAS SEUS VIDIOS SÃO MARAVILINDOSSSS.
Wow I think you made the sound barrier possible. I bet if you add plexiglass to that frame those fighting kids in the backseat would be muffled enough you could actually have a conversation in the front seat that consists of more then stop fighting.
many shoes are too tight and undoing them to put them on takes extra time so a shoe horn is a useful item, I have used them for many years, If I hadn't got one I would make one as I have lots of bits in my come in handy shed.
All the sneakers today come with those horrible high tabs in the back, and as a senior, even opening the laces as far as possible, those tabs are an obstacle to getting the shoes on. Finding a tall/long shoehorn is difficult, and I've tried using smooth cardboard, but its been a failure, basically. NOW I have the solution for this daily challenge. THANK YOU SO MUCH!
Hello SLC (Specific Love Creation) Many Thanks for slide Shoes pipe idea, i copier you tips & u know my ftather (old man) when ussing with normaly is difficult to put in shoes, after i made half pipe shoes, oooooh....very easy with this, oke keep Rolling with other hack pipe newest.... Thank You....
great ideas I just didn't get like two of them didn't get it but I can always wacth the video again untill I know what ur talking about but thanks ill definitely will use some Thank you keep the ideas coming :-)
I like your channel a lot.! You have many great ideas and uses. But this one here "The Dog Barrier" I question the passengers safety. I just wonder if in an accident when this stuff breaks does it turn the P.V.C. into edged weapons.?
Chihuahuas would fit though holes that such a device would not easily cover, best to use a seat belt leash adapter. (I just did a large comment about this.)
Many of your hacks are actually just hangers. I'll introduce you to something... sticks, dowels, hangers, anythingstraightornotevenstraightthatyoucanuseashangers,...
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบรองชนะเลิศ]](http://i.ytimg.com/vi/zPm8ClLVhoE/mqdefault.jpg)
Very useful sharing. TQ
I think the pvc tape hanger has room for a little improvement. If you use two different diameter pipes of the same length and slide one into the other. You can slide as many tape rolls as you need over to one side or the other and pull the pipes apart to take a roll of tape without having to take all the rolls of tape off to get to the one you want.
A cheaper and safer alternative to your first tip is to buy a seat belt adapter for your dog/cat's collar or harness. You can find them on eBay for under $5 or make your own with an old seat belt latch and leash clasp. This has the added advantage of keeping your pet safer in the event of a crash and allows you to have the back windows down for them to get plenty of fresh air.
sienile
sienile
mantap idenya saya sangat sangat suka..bravo..bravo
Awesome...speechless...each pvc´hacks is better than previous...thanks from Spain.
You are very kind, thank you
The idea using glued on sandpaper can also be used by folks who can't reach their feet but want to have a way to keep foot calluses smoothed down. Use a fine grit sandpaper and hot glue and replace the sandpaper as it wears. This would be a handy, diy pumice stone like device.
Some good ideas here to build on.
The sink strainer lifter would store more easily with a tee on the end.
Extending the shoe horn handle (and adding a tee?) would be great for folks with mobility issues and can't bend/stretch to their feet.
LOL!!!! MY BABY will be 14 YEARS OLD TOMORROW, NOV. 3!!
We have been together since Dec.24, 2005.
She's always had a harness, secured to the passenger seat headrest by a leash, short enough that she won't hit the dash or windshield due to a sudden stop.
She used to have a Tinkerbell child-sized stuffed chair wedged between the seats of our Suzuki Sidekick where she rode high enough to see all of the exterior surroundings and safely secured to the headrest.
After we got our mini van she now has pillows so she can see out and enjoy the panoramic view from the passenger seat.
She's never been in the back seat and she's NEVER ridden without being safely secured.
At 8# my little Chihuahua would easily be able to go between the PVC openings.
ANY PET OWNER who does not SAFELY SECURE their PET is TOTALLY IRRESPONSIBLE and SHOULD NOT HAVE PETS.
PETS, CHILDREN and ADULTS who are NOT SAFELY SECURED become PROJECTILES at UNDER 15 mph and WILL BE SMASHED AGAINST WINDSHIELD OR DASHBOARD resulting in CRITICAL INJURIES OR DEATH BY A SUDDEN STOP. .
Speeds above 15 mph will FLING passengers through windshields and door windows.
PLEASE, do not encourage IRRESPONSIBLE HUMANS how to keep their PETS and KIDS from climbing into the front seat by installing a PVC barrier.
THANK-YOU.
I've been binge watching your videos ever since I found them!
OK, on Idea #5, the shoe-horn...
You can make the handle about 2 1/2 feet long, and you don't have to bend down to use the shoe-horn. Put a 1/2" hole on the handle end and you can hang it on a coat-hook above your shoe-rack.
Good idea
A workshop's necessities: PVC pipe, duct tape, binder clips of all sizes, WD40, and cable ties. These will handle most of the problems that pop up. Great series of vids.
+Paul Kettle Jr Thanks
Specific Love Creations
superb idea. we like it .
+Nish Oke Thank you
Thank for your idea. Do you have any idea of pvc pipe for gym activities ?
I have shown pushup stands and stretch bars so far. If you think of any others, please mention them.
Thank you, I will find it.
Thank you!!! Keep them coming!!!
keep them coming.
thanks
I enjoyed this one especially the one with the strut. I'm not quite sure but a similar trick could possibly be applied with camper tops that have worn out/torn up?
+Stacy Panter Good thinking
If you ever, (and I hope you do), put out a book, (or maybe even an ebook), of all the pvc hacks you have shared, pleasel let us know. Today, I personally needed the shoe horn, curtain rod, and sink-stopper removal; I certainly could have used the screwdriver one when putting things together, but I'll know in the future, as well as the plug-reach tip! I know I haven't seen them all, and I forget alot of what I 'have' seen. A book would be SO appreciated! Fair thee well!
+J Jo I never really considered an ebook before, but I will keep it in mind for the future. Thanks
For the sanding tool you can also roll up extra sandpaper and stick it inside the pipe for storage.
Good thinking
ɷ I Haveeee Watcheddd Thisss Movieee Leakeddd Versionn Hereeee : - t.co/NdLgwVlw7a
I love the tips and you’re so quick and fun, hope you keep it up!
CJC made an excellent suggestion!
Neat ideas.
+Joan Burr Salzman thanks
I liked the sink and plug things the best.
cyberi4a needle nose pliers work also and have more usevthan a single use piece of PVC
You are King of PVC
...great!!!
thanks
The sanding idea is great, but I would think you could add add a tee joint so you don't sand your knuckles as well, especially if you sand paper on both ends!
Here is an idea... I guess "arm knitting" with super thick yarn is all the rage now. I saw an idea to use 1 1/2 inch PVC for the needles, and I have two pieces of it in 24" lengths. They suggested duct tape for fashioning the tips/points, but I could use some expert advice on making tips that are both sturdy and will stay on the PVC. I have couplers for the end to keep the yarn from sliding off.
very interesting
Another great round of ideas! Thanks for sharing them with us!
Thank you very much
Love the plug reacher!!!! All my outlets are on the basement ceiling!!!
+Ed Killmer Glad to help
200 PVC ideas! keep on keeping brother.
Thank you
+Specific Love Creations(:
Man, I could have used that rear door strut holder before.
Great 👍🏻 ideas 💡
what will be most interesting would be a PVC pedal cart
You are magic of PVC :)
The PVC is soo great never get damage with the weather of dust
Some of your ideas would be very helpful for handicapped people or the elderly!!!!
i like this vid
Thank you
Niffty idea with the "strut" brace, not sure if that's what they're called but, if you wipe the pistons down with W-D 40 BEFORE they go bad, you won't have to worry about hacking up your PVC. Just a little preventive maintenance goes a long way.
Thanks for the info
Specific Love Creations My pleasure. BTW, do you sleep?! XD
Gary Kovach Not as much as I should
Ur a genius. Thx 💪
Thank you for the video.
Oh yeah... even if it's just icky dish water, which I hate reaching into to unplug. I'm sure I make the most hilarious faces while lowering my hand into the bacteria filled water!!!
:)
I enjoy all you pvc videos. I especially like the shoe horn and the sink strainer hook.
+tammy bartelme Thank you
Q
Specific Love Creations the tie strap sticking out to the rear seat is good way to put a childs eye out
Nice ideas. That shoe horn could be made longer for people who have trouble bending.
great idea
well done
Thank you
Rather than glue the sandpaper...cut a slot down the length of pvc to match length of sandpaper and roll and tuck it in.
+Fifi Gazepis good idea
the dog hold back that work for kids too? lol or they take it apart? the sink idea is awesome :)
+Chad Brailer LOL
Pvc glue
nice
You could also put a length of pvc into the t connector for the screwdriver for more leverage
Yes you could
Great tips!! As ALWAYS!! 👍
+Kirk Johnson thank you
you're getting your a lot of support lately
We have a bunch of wonderful subscribers
love these hacks
Isnt it easier to get up and plug whatever youre plugging than making a whole tool for it?😂😂😂
+Jacob Fleury It is for out of reach outlets, like in the ceiling.
Another good video. I really liked that guard to keep the dogs in the back of the car.
+CrankyPants Thank you
CrankyPants me too and I’m gonna put some screen over it to make it more official , plus i have small dogs , they mite try to squeeze threw
I like the shoe horn idea the most, all were creative.
+Washington Prepper thank you
Me thinks someone needs to put these 200 ideas for PVC into a book!!!!
:)
I started writing them down so I could recall which one to re watch at a later time.
good job on the video I enjoy the ideas u come up with or show it actually inspired me to make a soccer net for my kids using recycled plastic bottles for the net
Very cool. How did it turn out?
The goal turned out fine but it was my first time reusing a plastic bottle so the net wasnt the best but when they watched me finish it they did know what I was trying to do
Love the ideals awesome channel.
+spoileddog Thank you
This is the first one I've watched. Very clever! Thanks.
+maylien Thank you
Oh great
Awesome... man incredible! I didn't understanding #6?!?!?!
Me either. Hope he sees these and elaborates.
thanks for sharing, amigo! I really appreciate it
It's Cool
Класс
Normally the problem when you cannot reach the socket is that you don't have place to plug it straight. Because it's behind of something or so.
Thanks PVC man. Gonna try☕
Got any ideas on building a clothes hanger to dry garments that don’t go in the dryer?
The plug life hack, I swear people will do anything to not get up.😂
very nice
I used the undersink curtain idea but had to bend the PVC to a 90 and hang a shower curtain from it to cover the hole in the corner of my basement where the sump pump lives.
Glad it helped you
what about runing cords or wire through pvc underground so they dont snap and stretch
so you dont have to run them above ground where they will eventually stretch and snap anyway
That last one you did (the one with the car),
I thought my dad was the only one that did that. Its cool to see that there are more people that do that too
GOSTO MUITO DE ASSISTIR SEUS VIDIOS..PENA QUE NÃO ENTENDO NADA QUE FALA...SOU BRASILEIRA E NÃO SEI FALAR SUA LINGUA..MAS SEUS VIDIOS SÃO MARAVILINDOSSSS.
Super
wow 20th Edition congratulations on these interesting videos.
+TheLightHouseLady Thank you
Wow I think you made the sound barrier possible. I bet if you add plexiglass to that frame those fighting kids in the backseat would be muffled enough you could actually have a conversation in the front seat that consists of more then stop fighting.
As for the PVC "shoe-assistant", I simply untie my shoelaces and slide into my sneakers ....
many shoes are too tight and undoing them to put them on takes extra time so a shoe horn is a useful item, I have used them for many years, If I hadn't got one I would make one as I have lots of bits in my come in handy shed.
Some shoes don't untie, like slip-on sneakers.
All the sneakers today come with those horrible high tabs in the back, and as a senior, even opening the laces as far as possible, those tabs are an obstacle to getting the shoes on. Finding a tall/long shoehorn is difficult, and I've tried using smooth cardboard, but its been a failure, basically. NOW I have the solution for this daily challenge. THANK YOU SO MUCH!
love your videos man! great ideas to do for small fun projects with the kids and family! keep it up!
Thank you very much
Hello SLC (Specific Love Creation)
Many Thanks for slide Shoes pipe idea, i copier you tips & u know my ftather (old man) when ussing with normaly is difficult to put in shoes, after i made half pipe shoes, oooooh....very easy with this, oke keep Rolling with other hack pipe newest....
Thank You....
I made and used the strut idea before the internet or youtube was around, got sick of banging my head and new struts were too costly.
great ideas I just didn't get like two of them didn't get it but I can always wacth the video again untill I know what ur talking about but thanks ill definitely will use some Thank you keep the ideas coming :-)
+Yolanda Rates Thank you
Oh that’s why they make those types of screw drivers
make a pool with pvc
Pvc pipe and industrial .3mil drop cloth.
Then you have a pool for less than $50
ha-ha... love the shoe horn
+Tina Stewart thanks
I like your channel a lot.! You have many great ideas and uses. But this one here "The Dog Barrier" I question the passengers safety. I just wonder if in an accident when this stuff breaks does it turn the P.V.C. into edged weapons.?
i use the sink curtain for my windows already
awesome
Smart dog barrier but I got chihuahuas they would squeeze right through....
Use chicken wire on the PVC so that the chihuahuas stay put.
Chihuahuas would fit though holes that such a device would not easily cover, best to use a seat belt leash adapter. (I just did a large comment about this.)
comment chasser les mauvaises esprits
I was the sixth viewer
pvc flares!
can you make holders for ipads
+Hemendra Chaudhary I did a couple months ago
A shoe horn is only $1
Goo ^_^
Does this guy work for a pvc company 😂😂haha
+john maden :)
You sink waste is not piped right and that 's why in your videos drains slow and might be smells sewer gases.
Plumbing Inspector also, where's the vent?
It also looks like it starts at 1-1/2 then transitions to 1-1/4 after the downward 90 and then back to 1-1/2 on the vertical
Many of your hacks are actually just hangers. I'll introduce you to something... sticks, dowels, hangers, anythingstraightornotevenstraightthatyoucanuseashangers,...
Could I possibly use your creations in my video please let me know
"Taking a second to put rubber gloves on is now over! Go find a pvc pipe and cut it in the exact size of what you need instead!"
Carlos Castillo Uuhhh..... rubber gloves help to securely hold the pipe....
any more planting videos?
Not as of yet, but maybe in the future
Just replace the strut ... Problem solved
Can not get the cross joint
or you could just untie your shoes...
do a pvc rollcage lol
You do it first
towards the end of the video he stated you Will bend your car.
I am not sure what to think when I heard that to laugh or take it serious lol.
so we should call u pvc man😆
if you would like