Love the videos, relied on the one about timing chains when doing mine. 👌 Now I have done a head gasket.😢. Do the cams have to come out to get to the head bolts? Thanks Darren. Australia
If you check the Nissan shop manual, it is called for by the manufacturer. Torque to spec, loosen, torque to spec, 90 degrees, 90 degrees. Some engines/modifications call for 95 degrees, 95 degrees as the last two steps. The one who has no idea what they are talking about is Mirko.
Hi mate I’m so stuck. I’m placing the bolts on the head now as we speak and I’ve torqued my torque wrench to 180* degrees but I’ve been turning for a while on bolt number one and it still has reached 180 on my wrench. Am I suppose to torque it to 180* or just turn the bolt 180* just with a breaker bar?
I am installing my head on a 2012 Nissan I am a little bit confused on on twerking I don't understand what it means when it says 120 + 5 what does that
had a problem. cooling system antifreeze was leaking trough header tank. . removed cylinder head. .was skimmed and headgascket replaced. . but have same problem. antifreeze is leaking through the top of header tank. wasn't the job been done correctly or the problem is somewhere else.
hello i have a nissan pathfinder automatic 2.5dci the problem is that when i go above 2000rpm i have no power and black smoke comes from the exhzaust .i"ve don a reset pn the ECU remove the battery for one hour no engine check light no nothong just above 2000rpm no power as more i step the accelerator the more black /grey smoke comes out .Can you tell me what to check first?
When loosening the bolts is it important to loosen them in reverse sequence of tightening order?
Love the videos, relied on the one about timing chains when doing mine. 👌 Now I have done a head gasket.😢. Do the cams have to come out to get to the head bolts? Thanks Darren. Australia
howd you get on? just started on mine 06 d40
Great vid mate, tha!
Hi, in the third stage, you un tighteen all bolts 360° or one by one and re tighteen 4kg? Thank you
Undo ALL bolts 360` then re tighten all
nice Video, but why did you losen the bolts after torqing them at first
He got no idea what the hell he doing
If you check the Nissan shop manual, it is called for by the manufacturer. Torque to spec, loosen, torque to spec, 90 degrees, 90 degrees. Some engines/modifications call for 95 degrees, 95 degrees as the last two steps. The one who has no idea what they are talking about is Mirko.
what's the best catch can for this motor mate?
Nice job guys
What happens to the cilinder head when the timing chain got broken while driving
May i ask, What are the size of the bolt (head) for Nissan Navara YD25?
I also thought u had to undo the bolts and do it again ?
Is there a seal between head and timing cover tensioner oil gallery?
Hi I have a Nissan cube 2006 what's the torque settings for that please
how many pounds do you need for those wood screws, that is market to show
Please do one for a zd30 patrol as I gotta do it soon 😂
Are you using new or some bolt?
Do we need to change the bolts with new ones ?
Torque to yield bolts need to be replaced
Amigo buen dia tecescribo desde Colombia quisiera saber q presión de aceite maneja el motor yd 25 diesel
What is the intake and exhaust valve clearance sir...thank you..
We like it to be between 10 and 18
Hi mate I’m so stuck. I’m placing the bolts on the head now as we speak and I’ve torqued my torque wrench to 180* degrees but I’ve been turning for a while on bolt number one and it still has reached 180 on my wrench. Am I suppose to torque it to 180* or just turn the bolt 180* just with a breaker bar?
Turn the Bolt 180`
Nissan frontier parts?
I am installing my head on a 2012 Nissan I am a little bit confused on on twerking I don't understand what it means when it says 120 + 5 what does that
had a problem.
cooling system antifreeze was leaking trough header tank. . removed cylinder head. .was skimmed and headgascket replaced. .
but have same problem. antifreeze is leaking through the top of header tank. wasn't the job been done correctly or the problem is somewhere else.
hi, could you tell me the torque setting for the cam harness bolts please, thanks for all the grate videos by the way.
Nissan car sylpuy how much torque head bolt
Already one bolt damage
hello i have a nissan pathfinder automatic 2.5dci the problem is that when i go above 2000rpm i have no power and black smoke comes from the exhzaust .i"ve don a reset pn the ECU remove the battery for one hour no engine check light no nothong just above 2000rpm no power as more i step the accelerator the more black /grey smoke comes out .Can you tell me what to check first?
just now news i was in garage of my friend and he cleaned the boost solenoid and the turbo now is workong like new
Gracias
That's impressive
great vid but i hope them shop sounds have changed by now 😂
Your flipin doolally mate, once a bolt is tight it's tight. Why the hell would you want to loosen it again only to tight it again. Madness
I thought Head gaskets were crush fit and bolts were use once
Nice, but vedio not clearly because 240p resloution only.
hi Im fram Iraq we have nissan navara thanks for information
Thanks for watching more out soon.
I sent you an email and you have not yet responded to it. Please check.
Call 01274 640028
I am on another continent...Africa to be exact
Same specs for QD 30 is the same
👍👍👍🤝
am getting frustrated by the low volume in the videos.
HELP HELP ME AJUDA COM MINHA FRONTIER HELP............????
Por favor asete un curso de español .es mui buena to i formación.buscate un intérprete desde chile.saludos .c
Se me cortó la cadena unos.