Superb and inspirational work. As a keen wood worker I think this one of the best videos I've seen for a long time. I'm therefore going to try and make a similar clock.
Could have saved a lot of sanding time when applying the resin if he 1) put painters tape along the seams and 2) removed the excess overflow before it set.
Very nice, but could be better. The spacing of the wedges should not have been done by hand, it left the lines less than perfectly straight and the spacing less than uniform. I know, most people will never notice. But it would drive me up the wall.
Please let me know where you get the sanding accessories you use on the angle grinder? Especially the sanding drum. As pertains to your video, you will get more viewers with a shorter video. You may want to show 3-4 of the repetitious cuts but there's no need to show every one of them. Without a doubt, it is one of the most beautiful wall clocks I have ever see. It's actually a work of art and you sir, are an artist.
So why isn’t it. I think it’s a lot of work and for it to be done by hand with that precision is to be admired! If a person has a cnc then it would be simple.
Very good job. That's a lot of work. When you started painting the numbers white, I was oh no you should have painted them black. Or even gold. But the white numbers looked good. Also don't trip on all the loser's and their rude comments. I bet not one of them have built anything, that looks half as good. They are just the type of people, who are not happy in life. So they try and make everyone else unhappy. May I ask what kind of woods did you use. And what finish. Also I don't know if you were going for a rustic look or not. But something that looks that elegant, I think should have had a smoother finish. Just the edges looked really rough. But I'd hang it in my living room. My address is. No I'm kidding. Again good job. And take care.
The ideas good but the finished piece looks a little rough, I didn’t like the numbers at all. The whole video could have been half the length by taking out all those repetitive bandsaw and scroll saw cuts
I'm sorry, but the finished product is not the most beautiful wall clock I have ever seen. It's nice, but it's not that great. I would suggest when you say something as bold as that, you consider the tens of thousands of other hugely talented people on TH-cam who make things as well. It has to be something quite spectacular in order to be the best that hundreds of thousands of viewers have ever seen. Keep trying.
It's pretty easy to find things in this project to criticize. And the further out you stick your neck, the more criticism you invite. I too have done a hell of a lot of work I could have done a hell of a lot better. I think people doing this level work first deserve acknowledgment for their effort and second, coaching, then more acknowledgment. That's just what I think.
Interesting clock. But why use a circular sander instead of a dual action sander; that way you avoid so many swirl marks. And why cut the curves on a scroll saw? Has the man ever heard of a bandsaw? And finally, obviously the wood grain wasn't filled before spraying on the finish, so the clock always looks like it was made by an amateur. Just my take.
Very beautiful and original design clock, built to make you happy every time you look what time it is. ❤😊🙏
Thank you for sharing.
My pleasure 😊
Absolutely beautiful great job
Thank you! Cheers!
Absolutely magnificent craftsmanship! Beautiful
work.
Glad you like it!
Que hermosura, que elegancia, que brillantez, por donde se mire es hermoso. Bonita combinación de colores. Mil felicitaciones maestro
thank u so much!
Muy sencillo, pero muy bonito trabajo!! FELICIDADES!!👍👍👍
Thank you! Cheers!
A very unique and beautiful clock. Wonderful craftsmanship, congratulations on a masterful project
Thank you so much 😀
Genialny pomysł i wykonanie ❤
thank u so much!
So beautiful
Thank you! Cheers!
Wow! Beautiful!
Thank you! Cheers!
It's time consuming but it's nice though.
May be someone could make exactly the same design using CNC and we'll see which one is more delicate😂
Great point!
Absolutely beautiful!
thank u so much!
Superb and inspirational work. As a keen wood worker I think this one of the best videos I've seen for a long time. I'm therefore going to try and make a similar clock.
Glad you enjoyed it
روعه الروعه والجمال
thank u!
Artista!!!!
thank u so much!
Beautiful 👌
Thank you! Cheers!
BEAUTIFULL WELL DONE
Thank you! Cheers!
way cool - nice job
thank u so much!
Einfach im Aufbau, aber das Ergebnis ist fantastisch gelungen 👌👌👌
thank u so much!
Super extra Klasse👍👍👍👍👍👍👍👍
thank u so much!
Exelente ! 👍 ❤️🧉🇦🇷 !
thank u so much!
Great job
thank u!
Gotta give it her, that lady designed a beautiful clock...
She definitely has vision..
thank u so much!
Beauthyfull very good 👌👍
Thank you! Cheers!
Very nice!
Thanks for the visit
rat dep Anh
Thank you! Cheers!
Very nice looking. The back looks a little less finished, but that doesn’t get seen too much.
Yeah I agree! thank u so much!
I am a woodworker also. I will be in Saigon and Vung Tau from December 21st-31st 2024. It would be nice to meet you and perhaps, di an pho.
Thank you! Cheers!
Nice creative work❤
Thank you! Cheers!
Very Nice...
Thank you! Cheers!
It's a shop class project and it looks like one
thank u!
Go ahead and show us your better….. your. Not.
Nice job. Different like anything else some love it others don't. I personally like but the numbers would have router them and filled with epoxy. 😊
thank u so much!
A job well done and you have a new subscriber from the uk 👍 👍
Thanks and welcome!
Bellissimo lavoro, perché non metti anche le misure dei lavori che fai? Così se vogliamo riprodurli, farli è più semplice, grazie
thank u so much!
Well I for one agree with you!
thank u so much!
V nice, but using a cheap plastic battery clock was a missed opportunity. A swinging pendulum is a great calming sound.
Thanks for the tip!
Could have saved a lot of sanding time when applying the resin if he 1) put painters tape along the seams and 2) removed the excess overflow before it set.
thank u so much!
Very nice, but could be better. The spacing of the wedges should not have been done by hand, it left the lines less than perfectly straight and the spacing less than uniform. I know, most people will never notice. But it would drive me up the wall.
Beautiful ❤ how much cost
thank u so much!
😮😮❤ 😮😮.
thank u so much!
Please let me know where you get the sanding accessories you use on the angle grinder? Especially the sanding drum.
As pertains to your video, you will get more viewers with a shorter video. You may want to show 3-4 of the repetitious cuts but there's no need to show every one of them.
Without a doubt, it is one of the most beautiful wall clocks I have ever see. It's actually a work of art and you sir, are an artist.
Thank you so much for your kind comments!
Actually i have more art on my channel. please follow and support me! thank you so much!
So why isn’t it. I think it’s a lot of work and for it to be done by hand with that precision is to be admired! If a person has a cnc then it would be simple.
thank u so much!
His bandsaw cuts are straighter than my table saw cuts
thank u!
Nice clock, but a hell of a lot of work.. and dust.💨🤔🤷🏼♂️ I’m also not sure about the large numbers..🤫
Fair enough!
Very good job.
That's a lot of work.
When you started painting the numbers white, I was oh no you should have painted them black. Or even gold.
But the white numbers looked good.
Also don't trip on all the loser's and their rude comments.
I bet not one of them have built anything, that looks half as good.
They are just the type of people, who are not happy in life. So they try and make everyone else unhappy.
May I ask what kind of woods did you use. And what finish.
Also I don't know if you were going for a rustic look or not.
But something that looks that elegant, I think should have had a smoother finish.
Just the edges looked really rough.
But I'd hang it in my living room.
My address is.
No I'm kidding.
Again good job.
And take care.
Thank you so much! Your comments are truly appreciated!
Do you give out plans our sell?
yep! thank u
😧😧 manipulations très dangereuses à plusieurs reprises 😲😲 mais il y a de jolies choses
thank u!
I find this video incredibly stressful for some reason
thank u!
Because no dimensions are given
Fingers too close to cutters?
Just Amazing
Without the borders it would be uncluttered.Try without the border next time.
ok! thank u!
👇 Always that ONE person ... 🙄
thank u!
The ideas good but the finished piece looks a little rough, I didn’t like the numbers at all.
The whole video could have been half the length by taking out all those repetitive bandsaw and scroll saw cuts
thank u so much!
Pues hagalo Usted Mismo, yo creo que eso Hace Falta para que no Quede Tosco 🤏🏻🧠🙄
@@CarpentryWTQue Bonitos Sus trabajos Felicidades 😃
I'm sorry, but the finished product is not the most beautiful wall clock I have ever seen. It's nice, but it's not that great. I would suggest when you say something as bold as that, you consider the tens of thousands of other hugely talented people on TH-cam who make things as well.
It has to be something quite spectacular in order to be the best that hundreds of thousands of viewers have ever seen. Keep trying.
thank u so much!
Hack from a rough shop.
Gap filling isn't joinery.
It's a hack.
thank u!
No it isn’t!
thank u !
😂😂😂
Fu it is!!
I’m done with the internet for today 😂
*Wow that's just plain rude* 😆
It's pretty easy to find things in this project to criticize. And the further out you stick your neck, the more criticism you invite. I too have done a hell of a lot of work I could have done a hell of a lot better. I think people doing this level work first deserve acknowledgment for their effort and second, coaching, then more acknowledgment.
That's just what I think.
thank u so much!
👍
Y’all being nasty up in here I want to see you do this…. If not shut up!
thank u so much!
RE video title claim: Are you assuming you know the personal preferences of all potential viewers?
Interesting clock. But why use a circular sander instead of a dual action sander; that way you avoid so many swirl marks. And why cut the curves on a scroll saw? Has the man ever heard of a bandsaw? And finally, obviously the wood grain wasn't filled before spraying on the finish, so the clock always looks like it was made by an amateur. Just my take.
Thanks for your comments!
because he used the tools he had, not a shop full of sponsored festool, woodpecker, total boat, and other tools normal people can't afford?
superglue and nail gun, terrible🤮
thank u!!
Thats bad 😂😂😂😂
thank u!
😮😮😮hässlich wie die Nacht!! Einfach nur den Anfang genommen und ein Uhrwerk fertig. 👎👎👎🇩🇪
thank u!
A real waste of my time
thank u!
🤮🤮🤮
thank u so much!
Слишком много чести одноразовому будильнику.
thank u so much!
Gross
thank u!
Those who can, do. Those who can't, criticize.
We don't need to see every single repetitive operation
thank u so much!
The amount of gobbledygook chemicals in the wood grain... .
This project is a joke!
thank u!