How to tie a soft shackle
ฝัง
- เผยแพร่เมื่อ 23 พ.ค. 2016
- Yachting Monthly clearly demonstrate how to tie a soft shackle in 5mm 12-strand Dyneema.
Soft shackles made from Dyneema are lighter and stronger than stainless steel, they are also kinder to your boat and your hands.
Read our full group test in the July 2016 issue of Yachting Monthly - แนวปฏิบัติและการใช้ชีวิต
I am a Professional Rigger for 3.5 decades. This is a very well done instructional video. This version of a soft shackle is one of the better versions.
This was really well done. Clear, thorough, and can actually be implemented by the viewer.
The best demonstration video of a soft shackle I have seen on youtube. Keep them coming guys
One of the best demonstrates on the soft shackle appearing on TH-cam... cheers
So well written, performed, and framed! I wish all youtube videos were this perfect!
I have watched this a dozen times. The script is perfect, the camera is close enough to show detail, lighting and audio are flawless, the vocal performance was clear and supportive. Dang, that's a nice, simple video. Perfection!
Clearest explanation I've found, especially the diamond knot
Excellent video. Been meaning to get round to this for ages so thanks for the guide 👍⛵
This is the best explanation I've ever found, good job! I really like the elegant simplicity of this version, with no extra loops. When you described a Carrick bend part way through the diamond knot, it drew in prior knowledge which is always nice. It looks like there is some unavoidable wastage because you lose the ends, and other versions I've seen describe methods of concealing or embedding the ends. Presumably you can burn the ends close.
Very clear! Thank you.
To tighten the knot if your tails are too short to make a full loop with the tails, just use a single overhand knot and then use the shackle loop tied to itself to capture only the temporary overhand knot. You can now tighten the diamond knot as it is pulled tight by the single overhand knot which was captured by the loop end of the shackle.
Awesome video, well presented and clear. Thank you.
Thanks for this. This is the vid that cracked the diamond knot for me.
Great video. Learned about these last night after one of our competitor's main traveler disintegrated during our regatta. Gonna tie a few this weekend.
Thanks for a clear explanation, top clip
The best of all of diy video. Thank you!
Excellent instructional video. Well worth watching. :)
That was great very well explained
That was quite hypnotic to watch & how useful. Having previously favoured the traditional "granny" to tie my ropes I;ll be sure to give this a try. Top tip as well to use the "penfid"...
I really liked this video the information is great and my dad would have explained it the same way. Wish I could remember all he taught me. Thanks 🙏
The video was well done. I modified the "fid" for my second splice. I removed the insert and cut it about 1/3 the way from the nib and then reinserted it into the fid. This made it much easier to advance the fid through the centre of the line without catching any of the Dyneema strands.
Lo
Fantastic! Love the concept and wouldn't mind seeing more.
Savannah
St
Savanna
Shays
Xvsns
Xxsxdgzdhx
Xvztxgggf
Fgfbxncg
Xnxbbb vbbxb and the car and its owners are the most of all types of cars in the United nations and are not in a 7PM position 3AM is not a 2nd generation car in this world and we will see 53inches in a week 7th quarter is 4AM and we have to be there
Eteya0e0415e81yachec
Wow, this is so smart!
Well explained, thanks!
Very clear.. Many thanks...👍
We actually connect all kinds of stuff in paragliding with soft shackles, so they must be safe! Rescue is attached with soft shackle, as well as the main canopy on some ultra-light wings...
the most helpful video ever. by the way, i suggets that dinghy sailors use half measures.
One more time this video became helpful
Terrific idea.
Primo! Well done.
Great video I made one with some leftover synthetic rope I had👍
Well done. thank you
Happy to have learnt this from you ,and not from some jaded high mileage geriatric sea tramp.
Thank you👍🏻
IME one can learn an awful lot from high mileage geriatric sea tramps, they at least know enough to have survived so far eh? Fair winds Daniel...
Awesome!!!
Thanks
More like this one. Please!
Julián Giraldo Ospina @
Спасибо. Очень хорошее видео
Really good and informative video - thank you very much
What are the measures (28 cm & 100 cm) for an 8 mm Dyneema?
Is it 45 cm & 160 cm to get the same shackle diameter, or?
Thanks
I keep seeing people recommend cutting dyneema with a knife. I've found that kevlar scissors work wonders.
Great instructional video, just wish the ends were colour cuffed with tape to follow and tie the diamond knot.
Excellent demonstration excepting the muzak
At 3:20 what position on the line do you insert the fid? At the exit point, at the mark, or somewhere up inside the splice?
Makes it looks easy...
It is :0)
I love this knot/splice. Such a great alternative to D shackles. That diamond knot will take a few practices though.
Thanks for the video.
What would the rating be on this shackle? I'm guessing it is just the rating of the rope, as that is the thinnest point at the slice loop.
During the test, the breaking strain of 5mm Dyneema was 1.3-1.9 tons. The lowest fail load of this design was 2.95 tons using the 1.3 ton Dyneema
Thanks for the reply. Those are some impressive breaking loads. Pretty good considering you don't have to buy or carry heavy shackles. Cheers.
What radios (6mm = 1m & 28cm) would you use for 4mm or 8mm?
Really nice looking but wouldn't a simple bowline suffice?
No it wouldn't. Dyneema and Amsteel, etc are too slippery. the knot would come undone before it reached what the line is capable of holding. Think of these as Shackles or Carabiners. They weigh less, are stronger, are cheaper, they don't rust and don't beat up your boat.
Don't know if I have the patience, Marlin Spike craft is not my strong suit.
5mm 12-strand single-braid? It looks like you're using a stripped writing pen for a fid? Great video!
Do the hockey pokey and turn yourself around.
Great video but I'm completely lost at 1:00 - "measure one meter of Dyneema" OK, got it ... "and cut off the end" - wait, what? Why? I just cut off a meter? Cut off how much?
Yes, a bit odd way of saying it, but it's just a metre length needed for the shackle.
Idk if you take boat requests but could you do a review or test on the Hallberg rassy 55 plz
Excellent video...but why the distracting music in the background. Don’t know why the producers of perfectly good videos need to tout them up with music that is worse than a dentists drill.
I enjoyed it, Paul.
Ya that’s why they sell a crap load of SS shackles!
One drawback I can see is metal pin can go thru smaller hole. This is much thicker.
moar like this please
diamond knot - this was a joke, right??
this is great video, but the music sucks can you post a version without music?
doesn't one have to suffer from OCD to tie this knot?
for the Carrick bend + diamond knot I suggest the video at th-cam.com/video/XSx4D6krQrY/w-d-xo.html . that video makes Knot end tying MUCH easier.
@anyone fid = pen or pencil ???
Fid is both a tool (a small spike to open the braid or lay of a rope, often with a hollow end for use as a lacing needle), and a measurement (21 times the diameter of a rope). Most modern fids are sold as a lacing needle for a particular diameter of rope in a 1 fid length.
Old sea dog sailing
Why go thru all that trouble when you can just tie a tautline hitch or other adjustable hitches?
Not the same thing. Dyneema and Amsteel, etc are too slippery. The knot would come undone before it reached what the line is capable of holding. Think of these as Shackles or Carabiners. They weigh less, are stronger, are cheaper, they don't rust and don't beat up your boat. A tattling or other adjustable knot would not hold very much due to the low coefficient of friction in these slippery materials. A Bowline will pull through before reaching the strength of the line.
Fortunately, TH-cam offers 'Mute' buttons. God-awful background!
Too damn fiddly. Can't I just buy them already made?
Yes £13-£22 to buy a shackle, or £3 for a length of Dyneema and the satisfaction that you made it yourself.
This is so convoluted, you’ld need to be a servant to accomplish it. A regular shackle would avoid the loss of one’s mind.