Manual Cleaning Printhead of XP600 Dx5 Dx7 DX11 same procedure Full Video Tutorial
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- #BiosTECHcher
#kaBios #JMFX
Brand New Printhead Link
shp.ee/4pkwb98
All heads are same procedure
Cleaning Printhead XP600 DX5 DX7 DX11, manually, checking all pins and colors.
Replace procedure too.
ask ko lng po, bakit pag nag papalinis kmi or maintenance sbi ng tech is di da mganda binababad, nakaksira daw ng head? di ksi completo nozzle check taz ginwa ko nmn na basic cleaning like fill ink multiple times gnun pa din, gusto ko sana ibaad nga like ung sa vieos mo, kaso nag aalinlangan aq. TIA
Boss ok lang ba na parang ndi ulan ang labas ng solution sa black gaya ng sau ok parin ba to salamat
Ano po yung cleaning solution na ginamit nyo sir??care to share..TIA...
Isasalo ba sa tubig yung solution sa tubig boss ??
why the cleaning solution flows from the top and from the belt poles, and not from the bottom from the nozzles
Good day! Sir matanong kulang po kung basa napo Yung flex cable nang head dx11 sira napo talaga yon o miron papo solution?salamat
Ma tête d'impression pompe bien et le nettoyage passe bien mais aucun test ne passe aucune impression ne sort .est ce que la tête peut être grillé ?svp
i cleaned.. left overnight... and test print gets worse...
by the way... i converted my xp600 kit and xp600 printhead is always misprints. what can be problems. Voltage? 🤔
Sir Tanong ko lang kung solution parin ba gamit mo sa print head yung pinapa tulo mo parang ulan?
Opo solution parin un. Sandali lang dapat ung pagbuga with solution.
my xp600 print head new only printed 3 months now its not printing anymore ,head is not clogged in any way ,when doing an flush it doesn't spurt ink out of head and not making the ticking sound while spurting. head is not damaged in any way what went wrong on head so that i can fix it.
I might be board or motor.
@@biostechprintingshop
How do test board or motor problem
@@biostechprintingshop can you send me foto of motor that controls the spurting of head and location of it
I got a problem with my head print. The nozzle don't spray ink, but I how can I fix it
Watch
boss baka ma help mo ako. ung black na labas eh hnd black parang may halo nahigupan ko na pero ganun pa dn
Anu po ung ginamit na pang hugas ng head anung sulotion po?
I buy secondhand rolaner re640, after install head and cartrige, the ink not to flow to printhead, what wrong?
Manually syrenge the dumper, or the topcop is not alligned with the head.
@@biostechprintingshop ok, now ink flow, but print test show not good. Have you experience?
Do i need to clean head same you did?
titigas ba ink sa hose mismo galing lagayan nang ink boss?
Excuse me, I got a problem with my headprint. the nozzle don't spray ink, what's cause of it? how can I fix it? (when I pumped test the color still normally flow)
It might be board.
I also have the same problem nozzle doesn't spray should I have to change the bord
Ano kaya Po Problem sa Printhead ko.
Habang nagpiprint sya..unti unti nawawala Yung buga ng Kulay?sana po mag reply kayu..
Boss anu gagawin pagkatapos mag linis ala padin lumalabas pag nag nusle
Hello converted po yung machine ko into xp600 single head, manual capping. bagong palit ang head. maayos naman for the past 3 days after installation sa head. tapos ngayon biglang nawawala ang colors sa printing niya. im using 3pass. lagi na lang nag-babanding. sabi dito yung capping daw ang problema. any suggestion po para sa capping problem?
Alignment ng cupping ndi sakto. Dapat saktong sakto ang x and y nyan
Can you use ultrasonic cleaner for the head?
If similar to alcohol or amonia. Can do.
@@biostechprintingshop im planning to use denatured alcohol
Moreso, how can i buy Xp600 printhead i do business in Nigeria
Is solution the same thing as solvent
ilang weeks bago mag manual cleaning ng head?
Depende sa clog.
Is the possibility that test print will show all colours but when you print you see lines
Nope, test print lines are proof that all colors are in good condition.
Bakit po yung sakin complete ang lines pero paprint na may lines lalo na sa black
@@biostechprintingshop thank you. It helped me a lot
Please if one line of the color go off can I use the same process to get it back
Yes, if regular cleaning doen’t work, use manual, make sure board not grounded.
Please is it solvent that you used in cleaning?
Yes. Solution
@@biostechprintingshop when you say solution do you mean solvent mixed with water or just the solvent alone?
Sir kailan pwefe lagysn ng oil yung bearing ng tarp printer
Pag nahihirapan na umikot.
Tanong Lang ako sir DX11 pwedi rin ba sa audly machine?
Pwede, depende sa board.
sir paano kita macontact? my problema large printer ko.
Biostech printing shop
mga ilang months na po yang gamit?
More that 1 year n po yan kung d ako nagkakamali mga 18months n
@@biostechprintingshop sir cleaning solution po ung gamit mo ?
HONJET DX11 PRINTER HEAD SOFTWARE can I ask for software of this head. TIA po
Sir paano magpalit ng ibang brand ng ink sa sublimation large printer china?tia
Drain muna, pag subli to subli no need cleaning, drain mo lang or iconsume mo ung remaining inks, then add mo na ung new ink na same subli inks pwede un wala gaano reaction mga ink, pero pag subli to eco need drain or cleaning kahit with water pwede na pero pag d kaya ksi madumi un, palit tank, hose at dumper ka nlng para sure. Pero pag ala budget kuya kaya mo icleaning ung tank, cartriage at hose ok lng din. Pero dumper need talaga palit yn.
ano name sa pang cleaning solution na ginamit mo boss?
sir yung cleaning solution ba ng tarp lang ang gamit?
Solution
sir ano pong cleaning solution gamit nyo po
Regular solution for ecosol
Sir good day nd po kumpleto ung test print ng blue s machine ko lgi my prob s kulay blue ibng kulay ok nmn po anu po kaya pd gwn at anu po problema salamat po sa sagot sir
Check mo topcup baka ndi pantay, then ung dumper baka may singaw or ung long host. Usualy topcup.
sir bakit po ang printhead ko pag nag text may blank na space? halimbawa may [[[]]] [[[]]] [[[]]]___ [[[[]] [[[]]]
may space po siya sa pang apat na bar sir.
Svp mon imprimante n'imprime pas pourtant quand je lance le nettoyage ça coule bien sur le tuyau même sur la tête d'impression je vois bien que ça tire l'encre mais aucun test ne sort ni aucune impression.svp quel est le problème et comment le résoudre ?
Même problème ?
how to cleaning uv printer 3 head cmyk+v+w ?
sakin boss okay naman spray pag pinump ng solution pero bakit pag nozzle check nawala mga kulay, may kunting cyan na lang?
Contact ng flex to board. Or head n talaga need n makita ng tech mu yn
Good
Gud day boss.... paano kumg d po lumalabas ung isang CYAN po?
Clog, full force mo bugahan
@@biostechprintingshop ano po gmitin boss?
Sir tinry ko po gawinyan pero after di na po lumabas ung ink kpag nag nozzle test po anu Kya po problema
Head n talaga, den bago install new head pa check mo ung board baka damage din,
hello po, anong cleaning solution po gamit nio?
Solution ng tarp
Yung akin po yng mga hose ng ink di sumisipsip ano po kaya prblema
Malamang barado, or ndi nakalapat sa topcup
where can i buy xp600 print head?♥
Pm me
sir ask kolang po kung bakit po nag iiba ng kulay kapag nag print po
Baka may tunnel na.
Ano printer nyo sir,di ba ma maintenance
Dx11
shp.ee/4pkwb98
Anu ho number nyo at loc. Ho
09369590301
Excuse me, I got a problem with my headprint. the nozzle don't spray ink, what's cause of it? how can I fix it? (when I pumped test the color still normally flow)
Ripping or usb or software prob.
Hi , I got the same issue , even unable to print nozzel test , any suggestion please