Instead of six months it takes 45 days instead of 35 labour it takes 6 laborers now you can do your calculation your self which will be cheaper in long term.
New technology is fine. But L&T has to do some basic research on this robotic construction so that it is eco friendly and suits to the prevailing weather conditions of the regions. Need to find organic alternative to plastic fiber component in the mixture as it will only heat up the building particularly during summer necessiating more ACs and thus raising the energy bill.
IT SEEMS THE CURRENT 3D building printing application is limited to short single story structures wuth minimal lateral forces like wind and seismic forces to worry about, else it will require TMT steel bars in which case it will be difficult to 3D print.
History is proof that.. No machine can build great architectures like human can build. Don't replace human with machine. Its not technology its human Greediness
This using lots of cement , it will increase the temperature?? Because of no bricks and sand the cement will absorb more heat and will heat up the interiors
Its is designed such as the walls have cavities in between so that the plumbing and electrical service can be added and the cavity acts as an insulation in the wall the exterior temperature will not get the drastic effect on the indoor environment.
The technology is so new that this information is more then enough for the non technical person. Company also does not share sensitive information. The building is still under construction,soon i hope it will make headlines when finished.
@@salimbaig5145 It is public post office. Do you have any Sense. You say it is sensitive information. As thou it is defense building. Ha ha. Where is your sense of understanding n sense of evaluation. What kind of logic you guys have. Where is your brain 🧠 n mind . Is it working properly or not. You seemed to be Inexperienced. Why fo you defend mistakes. 😒 Crazy guys bringing some illogical justifications. Which university you studied 🙂 🤔
Indeed it is possible but the equipment for printing and transportation and setup is not feasible for now but soon enough when more machines are being imported the technology will be viable for poors aswell.
Bricks are the champion among constn materials impeccable peerless college of engg guindy egmore chennai central station are few standing exples bearing testimony of 20decades existence
This 3d technology will never substitute rcc framed structures what is foundation details life span of the bldg is it recgnised by I.S.I.456-2000 etc not explained god save ewsbrethren
In my view... Technology is leaving humans with an unproductive mind with no skill and basic survival instincts of our own. Increased Dependency on them bit by bit will ultimately lead to humans having impotent brains and hence bodies.
Innovative. Cost effective. Congratulations to L & T and the far sightedness of the Postal Department.
This can be a game changer 👌
No way .
It is only feasible for high end building.
Cost analysis is missing here.
The project costs 25 lakhs , it is a very cost effective method
Instead of six months it takes 45 days instead of 35 labour it takes 6 laborers now you can do your calculation your self which will be cheaper in long term.
@@hgc.gaming6297construction value per sqare feet?
New technology is fine. But L&T has to do some basic research on this robotic construction so that it is eco friendly and suits to the prevailing weather conditions of the regions. Need to find organic alternative to plastic fiber component in the mixture as it will only heat up the building particularly during summer necessiating more ACs and thus raising the energy bill.
Amazing!! Is it cost effective?
IT SEEMS THE CURRENT 3D building printing application is limited to short single story structures wuth minimal lateral forces like wind and seismic forces to worry about, else it will require TMT steel bars in which case it will be difficult to 3D print.
Hope this technology will use to make residential houses in India so that people don't wait too much to get their home.
1. Where is the foundation? 2. Wont it be hot inside a building constructed using only cement?
Pre-foundation is already done before laying the cement....
Now it is time to come every corner in the india❤❤❤🔥🔥🔥🔥🔥🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
What about rods? And cost comparison on materials
Good Question 😊
Awesome 😎
I know, right?
you done goofed a wrong
Its located at Cambridge Road, not in Cambridge Layout, they're different places.
What about reinforced TMT bars? Will the structure withstand without reinforcement?
What software was used for designing
Marvalous 👌👌
History is proof that.. No machine can build great architectures like human can build. Don't replace human with machine. Its not technology its human Greediness
Details of foundation recognition from N..B..code not mentioned
Detailed video, which other news agency were missing from theirs.
Sir i want to construct ground and first floor site area is 1200 sft will they get build
Problem with addictive manufacturing of building is adhesive properties
It is awesome...
This using lots of cement , it will increase the temperature?? Because of no bricks and sand the cement will absorb more heat and will heat up the interiors
Its is designed such as the walls have cavities in between so that the plumbing and electrical service can be added and the cavity acts as an insulation in the wall the exterior temperature will not get the drastic effect on the indoor environment.
What is the cost per sqft, available in hyderabad Telangana?
Proud Moment...👏👏
ಸೂಪರ್
Iron road..base kause banta hai
POOR presentation.
No information about which area.
No information about Completion of project.
Finished building is needed.
The technology is so new that this information is more then enough for the non technical person. Company also does not share sensitive information. The building is still under construction,soon i hope it will make headlines when finished.
@@salimbaig5145 It is public post office.
Do you have any Sense. You say it is sensitive information.
As thou it is defense building. Ha ha.
Where is your sense of understanding n sense of evaluation.
What kind of logic you guys have.
Where is your brain 🧠 n mind . Is it working properly or not.
You seemed to be Inexperienced.
Why fo you defend mistakes. 😒
Crazy guys bringing some illogical justifications.
Which university you studied 🙂 🤔
Damm men ...where is RCC work Beam column ...how 3d printing technology is replacing this sub-structres thing .. please anyone can explain
imagine if metro was built like this so soon...
If they do that, how will the contractors and politicians make money?
@@umasankar1729 haha valid point
Most likely they will identify quality issues and not accept this
Where our construction workers go?
@@rajavishnuvardhana6830 they can go to pakistan
Wow❤
I Wanted In Bangarpet Bazar Post Office.
👍🏽
Tvasta 3d printed House best company .very low cost house. But they're not started work.
Can this not be used to build houses for poor?
Why not? Current 3d printing is expensive
Indeed it is possible but the equipment for printing and transportation and setup is not feasible for now but soon enough when more machines are being imported the technology will be viable for poors aswell.
The days are not far when humans will fight for food and water while their jobs are taken by machines.
Wouldn't it make the buildings prone to earthquakes and cause unemployment
Bricks are the champion among constn materials impeccable peerless college of engg guindy egmore chennai central station are few standing exples bearing testimony of 20decades existence
Poor folks thinking this heralds a bright future.
Looks expensive ...
Bricks? No need?
This 3d technology will never substitute rcc framed structures what is foundation details life span of the bldg is it recgnised by I.S.I.456-2000 etc not explained god save ewsbrethren
In my view...
Technology is leaving humans with an unproductive mind with no skill and basic survival instincts of our own. Increased Dependency on them bit by bit will ultimately lead to humans having impotent brains and hence bodies.
A reporter who can't even pronounce BengaLuru properly... Wow.
Best technology I like it . India m kB hoga 3 d printing house Modi ji ka Kar rahe ho Modi ji .
Can we start this business in Telangana can you please give contact number to start up this business
Tel me L&T contact details plz