Non-Skid Boat Deck / Floor Paint -Total Boat Total Tread (So Easy)
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Restoration UNDERWAY!! Last video I Primed the new floor. Now it's Ready for Paint!! I went with a Total Boat Total Tread Non-Skid Deck Paint. It was simple. This paint went on so easy! It wasn't as satisfying as the primer because the color change wasn't much difference. FINALLY all the hard work is coming together. This was a huge step in this process. Thank you all for the support!
Epoxy Resin: amzn.to/3Fs8Yhy
1708 Fiberglass: amzn.to/3HwQChl
Fumed Silica: amzn.to/3wWDT2A
1/4" Chopped Fibers: amzn.to/3cnuhEx
Scotch Brite Pads: amzn.to/3cpUpi2
Fin Roller: amzn.to/3x5e1Sk
Marine 5200: amzn.to/3FtUUUG
Bilge Paint: amzn.to/3qNhfZn
2 Part Foam: amzn.to/3Ds7a7z
High Build Primer: amzn.to/3clw395
Primer thinner: amzn.to/3HIIqLd
Non-Skid Deck Paint: amzn.to/32chrat
Fairing Compound: amzn.to/3nqsLYD
If you're interested in Treasure Hunting or our earlier fishing videos here's a link to our other channel:
/ @thehooverboys
The Hoover Boys Gear on eBay: www.ebay.com/s....
Boat Detailer Kit: amzn.to/3w0hD7E
Jescar Power Lock Polymer Paint Sealant: amzn.to/3moTCUo
Live Target Mouse Lure:
amzn.to/2UcdQ8B
Shallow Water Anchor
amzn.to/3vZI7oa
My Sunglasses (Highly Recommend) I have Grey Frames with Blue lenses...
amzn.to/32qKZNY
Lunker Hunt Frog: amzn.to/2PlhM0B
Z- Man Chatterbait: amzn.to/3fiKOZE
7" Bubba Blade: amzn.to/3hwTMHs
Cuda Fish scaler: amzn.to/2RSI9jb
Weber Wide Spatula: amzn.to/3hzPsaf
Traeger Ironwood 885: amzn.to/3yjdQCT
Sony ZV-1 Camera: amzn.to/2RpVIH9
Waterproof Camera's:
Olympus TG5: amzn.to/2Dfuk7u
GoPro Hero 7 Black: amzn.to/3gqtO4X
Amazon products we use and recommend: www.amazon.com....
BEST Deals on Treasure Hunting equipment: shrsl.com/2nrhu
Cheap Kids Metal Detectors: shrsl.com/2nrle
Best Beginner Metal Detectors: shrsl.com/2nrlk
Magnet Fishing Gear: shrsl.com/2nrm17" Bubba Blade: amzn.to/3hwTMHs
I respect that you still have your basement not finished. When something goes wrong you can get to it....Done
Haha! Yeah that project has been on hold
Fantastic Kurt... Lovin the Journey... THANKS!!!
You are awesome thanks for the motivation i have literally the exact same project i will be starting this month and will be following your videos almost step by step!
Good luck!
Your boat is coming along nicely Kurt!
Thanks!
It's looking Real Good can't wait to see it finished and floating.
Thanks! I can't wait
Looking very very good Kurt!! Can't wait to see it finished and out on the water!! God bless!!
I am excited for you! It is looking really good. Hopefully you will have the family on it soon. Been quite the journey.
Thank you for filming & sharing all of this! Ill have to share mine when its done.
Awesome! Good luck
You were beaming like a proud Papa! That really looks great.
You were all about the old westerns today.....True Grit and Rawhide (🎶 rollin', rollin', rollin' 🎶) Haha!
Haha! Thanks
Can we get a video of the project completed and tell us how much product you used for the project. Looks great so far cant wait to do one myself.
I build boats for a living, and your doing great my friend. And when your all on the water, the feeling will be much better than on a friend's boat or a rental.
I appreciate that Shawn. Thank you
This boat looks amazing Kurt!! Great job !! Thanks for bringing us along on this rebuild! Stay safe and God Bless!
Thanks John!
Looks awesome. Looking forward to seeing you taking the family out in it. That's where all the hard work pays off. Take care ✌️
I am amazed with the patience you have!! What an awesome transformation!! Nice job! Hopefully one of the next videos will be of you and your family enjoying the boat again!! 😀
Great video!
A great job… getting ready to start my own refurbishing thanks to your video’s
I comment every time you make a new boat video, I’ll say it again love this series! I admire your work ethic and commitment Kurt. I really can’t wait to see you go out for stripes tog fluke and other amazing salt water fish.
Thanks! I hope to soon
Having a bayliner project of my own I couldn’t help but get hooked on your restoration videos. Great work! My 15 year old boat still has a solid floor, but I’ve done a carburetor rebuild, ordered a new fuel pump and just recently discovered water in the 3.0’s oil. Kind of wish I had to do a floor instead.
It's always something my friend. Best of luck to you!
Looking awesome!
Thanks John!
Love seeing this project. I'm glad you decided to film this. It's oddly satisfying. 👍
Thanks Robb! I'm glad I did too. Fun watching it come together
Coming along great
Thanks Greg
Just finished binge watching the whole series. Also I subscribed to your channel. Standing by
Thanks Jimmy!
where are the rest of the videos? is the boat finished?
Nice job Kurt,
That color is nice and should stay fairly cool in the sun. I doesn't take much additional darkness in shade for the surface to get much warmer. I spent many years working in a boat shop down in Florida, some of the boats we worked on had gray floor paint and it was almost too hot to sit on when working on the boat. Lighter shades will serve you well.
Thanks for this and your Hoover Boys channel, I enjoy them both.
John
Much appreciated! Thank you
Love the content, gonna have to go back n watch the first video
Thanks!
A lot to be proud of! Amazing workmanship..
Thank you!
Nice job looks great
nice job i like the foam in bag trick no waste or mess great looking boat
Thanks!
I am one that has been there from the beginning and I think you’ve done a hell of a good job. It looks great. I can hardly wait till you can take it out to the water. Looking forward to those “snake fish” catching days. Love all your fishing videos.
Thank you Susan!
I’ll be going through this whole process in my 94 Rinker open bow next spring, I’m so nervous but I know I can do it, thanks for sharing this awesome work!
Goodnluck Chris! It's a lot of work but can be done
Awesome work, it looks great!
Haha! Thank you. Wasn't expecting to see a comment from you guys. Love the products
That is quite a difference from when you started! Looking good!
Much appreciated
Looks great.
Thanks!
I watched all the flooring restoration and you have done an excellent job and the videos are well executed and to the point. I just bought a 1999 Capri with a Mercury outboard and I notice that some areas of the floor have some soft spots....Not sure if I have the time and knowledge to do what you did, but I have an understanding of the size of the job....Well done, Thank you for taking the time to document that awesome project.
Much appreciated. Best of luck
make a playlist for this project looks great!
I need to I keep forgetting
"If you're going to do something, then might as well do it right". How apropos. Very last restoration step should be hand painting a name on the front bow. Port and Starboard. I vote for "S.S. Hoover" And of course a christening ceremony on video. Haha.
where is the boat all back together ? would love to see everything back together and you using it
Your skill and patient is great damn nice job compared to what I would have done lol
any updates?
I had done a lot of looking into just what the heck to do for my Next Sail boatas due to being disabled I just can't manage beautiful Teak decking Any longer, and normal non slip is very bad news for the feet and knees. So was toying with the idea of Synthetic Teak to keep the looks, but this product is now going on the side Decks, Cabin Roof, the Cockpit floor and the Bathing Platform. Synthetic Teak only on the Cockpit Benches and helm Seats. Looking at your video, it looks like I made the right decision. Thanks for that, and best wishes. Bob. 🏴👍
Great work bud keep it up want to see the final results
Great Job Kurt!! You make hard work look so easy! No i don't wish i had kept my old rotten boat and redone it as i did get some great use out of my 3.0 Merc motor. but i really love watching the snake head videos the most cant wait for the next batch of those. God Bless Bud.
Thanks Chuck!
need next part asap!
Waiting on a new video boss! New follower and I like all your videos
Yes Sir!
I hope you will show a before and after photos at the end. The comparison will be awesome. I enjoy watching all your vids on all your channels. I use your fishing vids as my get away fishing since atm I can't fish.
I definitely wish I took more before pictures. Definitely have some before video!
Love it
Thanks!
I used this and love it
When do you plan on getting the chairs put in? I’m undertaking the same project right now with my 87 bay liner your videos have been a great resource.
Chief, your neighbor is a lawn bonsai' artist! ;-)
Haha! He should be. It looks like shit. Can't drive on it everyday.
@@MentalHealthDay82 *snork*
@@MentalHealthDay82 watching ur video a few months after the job. How’s it holding up?
One step closer!
Thanks!
hey kurt i have to say john stevens and james ps says it the best .........finish it and you and bobby buttons get some snake heads..lol the boat is to big peace bro and be safe
looks good i hate stepping in crap
Do you have any updates on this project? I'm doing something similar and this has been a great series to follow!
Wicked restoration. Did you remove the floor in the cuddy as well? It kind of looks like your tools you're storing are sitting lower than the floor that I have in my cuddy. I've found soft floor in the cuddy as well as at the base of the dash step. Looking forward to doing something similar. As well as getting rid of the box seats!
My best friend was just given the exact boat you are restoring! Would you be willing to create an ordered playlist of your restoration videos? We’d really like to do the same thing!
I plan on it. I'll try and do it now
I can't do it now on my phone. I will as soon as I can. Thank you for the support
I’m going to use the floatation foam pretty quick. Did you only use those two gallons or did you have more. I have the same volume to fill and I’m hoping I only have to buy the 2 gallons
I did not see you putting in a inspection hatch for the sending part of your gas tank.
how is it holding up after a year? plenty of grip when wet?
Is it glossy or satin? Redoing my 1989 Mako 191 soon...
Can you report how it's holding up? Does it stain easily? How hard is it to clean? I have used Kiwigrip in the past and you can't keep it clean. I would sure love for your report since you have had it on a while. Thanks.
What kind of acetone did you use?
I forget offhand. It's linked in the description
Does this primer stick to aluminum so that I can do something like this in my boat? I hate that carpet I have in mine
So this is the last video on the bayliner??
What kind of roller did you use?
Hmmm. Maybe this is what we should use on our deck steps. Looks awesome, unlike 🐈💩
Absolutely
Just a suggestion, if you don't keep stirring the paint in the can, the grit will settle to the bottom and you'll have an uneven distribution of the abrasive on the deck. My wife made this mistake when she painted a room of the house with an abrasive additive in the wall paint
I want pizza! Do you deliver? Looking good!
Haha! Nope
so, step by step/prep is important... so you sanded first, then wiped with what? then you mentioned priming... with what? then the no skid?
Getting closer to wetting a line
Homemade Pizza Video Next Pls 🙂
Haha!
When’s the next video? We appreciate you.
I now start my day by stomping in a cat litter box… I dont even own a cat… 🤔
Where is the next video? Did you abandon this project?
cuts it every day tho haha? maybe he gets high off that fresh cut smell
Kurt if you don't want to step in cat poop get rid of the cats, they are bad.
Hahaha
FU
Love it