Love your positive attitude my friend. Jeez, "Manny" at motomillion gives away A LOT of stuff. I imagine you have to be a big time you tuber to get thousands of dollars worth of stuff sent to you. Great content!
Thank you DG! So the exhaust was not free. I shout-out Mani for many reasons, he is quick to repsond, quick to help, easy going, provides fast shipping. That's rare now a days, cheers man
The o2 sensors are usually disabled when the ecu is tuned with aftermarket exhaust. Hints why Graves didn't waste time including o2 ports on the exhaust. U can still install them but when they tune it they will disable them in the ecu/ disconnect them from harness.
Good to know! Thank you for the info! I think the previous owner or tuner disconnected then altogether from the harness cause I can't find them anywhere.
Bro i am from india 🇮🇳 and i love so much your videos and hates of your hardwork. And i have one request that please make long videos and atleast 3videos in a week. Love from india 🇮🇳
Whoever is reading my comment at this time, we are all unknown to each other, yet I pray 🙏to God that any tension going on in your life should go away and you will always be happy his mother. May my father have a long life, this is what I pray to God.🥰🥰i
Wish i had the time to play with my bike more often even if i had to remove and install things. CJ nice work we are waiting the next video. Greetings from Greece.
Well I'm not sure what to say exactly but thanks! If you find yourself Intersted in other things maybe that's a good thing, you'll be finding what you like to do which makes you you!
Don’t know if anyone has already said, PC5 has O2 plugs in loom. You can’t have them working as ECU will try to correct the fuel map the PC5 is changing. You need to get blanking plugs for the exhaust.
The aftermarket exhaust doesn’t use the O2 sensors that’s why they have them plugged. You have to install block off plates tune and flash the ECU to get rid of the check engine light caused by not having the O2 sensors hooked up.
Another great video! You should consider purchasing a cheap steam cleaner. Would have been so handy to clean the engine whilst the exhaust was off. Looking forward to the next one 👍🏽
I’m jealous of your know how. I’m fixing up a ‘94 cbr600f2 but not from the ground up. My first bike and it’s been a headache. You make great content with some awesome bikes. Keep up the good work
A simple home made bracket will sort the exhaust rear set issue. If you remove the ignition barrel you’ll see a code which you can use to source a replacement key
@@CJMediaOfficial I haven’t done it on anything as new as this. In my experience there are normally 2 bolts holding it to the bottom of the top yoke - they are normally security bolts so may need to be drilled out
I really enjoy your videos. I wish I own 1 like your beautiful bikes your rebuilding. Thats my ultimate dream. I am a big bikes fan but unfortunately I cant afford it. I just enjoy watching your videos.
You must make a custom bracket to connect the exhaust can to the rear sets...it yould be a big waste if you don't utilize them....bonamici's are solid race quality products and good looking too 👌
Hi CJ, You can still use the after market rearset, all you need is the Akr exhaust holder that attaches to the rear foot pad bolts. It comes in carbon fiber and it goes around the exhaust muffler. Do you mind sending me the R1 exhaust you took out . I will pay for shipping.
Hi Tarik! So the Akra exhaust has a slot for a attachment to the front sets which I'd like to use. I know there is holders that you can slip around the exhaust to the rear peg but it doesn't look as clean IMO.
hello friend, I hope you are very well I like it a lot oobwhat are you doing and I wait for the result of that yamaha. excellent project I really like your videos
So that's why yamaha doesn't have a glass for the lcd. It's glued to motherboard,is it still useable? If u got the new one must be very expensive. And that exhaust is so beautiful 😍😍
Exactly William! A new one is very expensive but I was thinking maybe I can just get a custom piece of glass cut for my dash?? Thanks man I think so too! Cheers 👊
It's very very high quality, I was skeptical at first due to the price but it works great! It's tough to use just a wrench to push and extract the pins so I had to use an impact. Honestly it will probably last me forever and the versatility makes me happy too. All I have to do to break a chain or make a chain, is flip flop that lower grey block. Simple as that. Pretty nifty, alright I'm done talking lol
I am from India i have s1000rr pro 2012 model my bike was accident recently the head light were fully broken down bro so u can tell how much it take for changing bro
Dont go back to stock rearsets. There are aftermarket hangers or once the bike is complete take it to a machineshop and have a hanger fabricated then polish or anodise, easy.
I'll do my best sir! I am a fan of the aftermarket sets. I am not a fan of the rear hanger to exhaust look. If I can get a bracket fabricated I'll try to get it hooked up to the front sets.
Love your positive attitude my friend. Jeez, "Manny" at motomillion gives away A LOT of stuff. I imagine you have to be a big time you tuber to get thousands of dollars worth of stuff sent to you. Great content!
Thank you DG! So the exhaust was not free. I shout-out Mani for many reasons, he is quick to repsond, quick to help, easy going, provides fast shipping. That's rare now a days, cheers man
@@CJMediaOfficial l
@@CJMediaOfficial l
. ... .. .
Hello, I'm Vietnamese and I love watching your videos
Am from south Africa, love what you doing bro.. Keep it up and love that in every episode you leave a scripture.
Dont change that. God bless
Thank you Karabo! Absolutely, God is and shall be number 1, the moment I change that, my work is in vain.
Come on people let's get CJ Media to 50 thousand subs. Sweet exhaust system, keep up the good work.
Much appreciated Ron! Cheers
Can't wait to hear the roar of the R1M.
You and me both!!
That is a nice exhaust, can wait to hear that crossplane roar. Goodluck ✌️
It's going to be so amazing Flak! 👊
That beat in the 12th minute of the video is 🔥🔥🔥👌🏾
I never tire of reviewing these works.
Always a good Sunday when CJ has new content, that exhaust looks 🔥🔥🔥
Thanks Conner! I agree it's FIRE!
The o2 sensors are usually disabled when the ecu is tuned with aftermarket exhaust. Hints why Graves didn't waste time including o2 ports on the exhaust. U can still install them but when they tune it they will disable them in the ecu/ disconnect them from harness.
Good to know! Thank you for the info! I think the previous owner or tuner disconnected then altogether from the harness cause I can't find them anywhere.
You deserve so many more subs, smashing it.
Thanks Dan! 😁
Great Work CJ, Nice upgrade and repair, your channel is growing up fast, you de serve, Stay healthy! God bless you and your family.
Thank you Eider! God bless as well! 😁
Wait for R1m series ✋✋✋
One and only Dream Bike
From Kathmandu Nepal 🇳🇵🇳🇵🇳🇵
Cheers arun!!
@@CJMediaOfficial love♥ your work bro👍👍
Thanks for dropping another video to feed my addiction! Keep up the good work!
Happy to share Leon! Cheers
thats awesome buds....i enjoy watching how you rebuild that 2016 r1m
Just found this series, can’t wait to binge it🤭🤭 Loving it so far btw.
😁😁😁
Making great progress! Your videos give me motivation to work on my motorcycles so thank you for that. Keep up the great content!
Happy to hear it alpha!! Will do
Why don’t you create a custom bracket for the exhaust? To fit the aftermarket rear sets. They are very good.
Yes absolutely agree a custom fit will work and these rear sets are beautiful.
A nice carbon exhaust bracket 😅
Cause he's just replacing parts and not fabricating anything
You're right I should look into that! That would be very cool. I lack a lot of the software and equipment tho
Yesssss, 1st . Love from India 🇮🇳🇮🇳🇮🇳
Can't wait to see the final outcome of your R1 M,Ride safe always buddy
Thank you mark!
Your channel has inspired me to buy a wrecked bike and fix it keep the vids coming bro
That's awsome! So glad to hear! What did you pick up??
@@CJMediaOfficial its only an old one 1996 honda cbr 600 didn't want to jump in the deep end
Bro i am from india 🇮🇳 and i love so much your videos and hates of your hardwork. And i have one request that please make long videos and atleast 3videos in a week. Love from india 🇮🇳
Much appreciated Zee, I'll do my best!!
Whoever is reading my comment at this time, we are all unknown to each other, yet I pray 🙏to God that any tension going on in your life should go away and you will always be happy his mother. May my father have a long life, this is what I pray to God.🥰🥰i
God bless you 🙏
right back at ya! amen
There is a bracket for that exhaust from the pegs , of course I’m not sure where you would find it but I’ve seen it .
O really! Ty I'll have to be on the lookout
Wish i had the time to play with my bike more often even if i had to remove and install things.
CJ nice work we are waiting the next video.
Greetings from Greece.
Thanks Mr.S! Greetings to you all in Greece 🤙
Love from India brother 🇮🇳.. Keep it up..
You've being taking away my attention for the past few days
I missed my team's football match which was life
Well I'm not sure what to say exactly but thanks! If you find yourself Intersted in other things maybe that's a good thing, you'll be finding what you like to do which makes you you!
Don’t know if anyone has already said, PC5 has O2 plugs in loom.
You can’t have them working as ECU will try to correct the fuel map the PC5 is changing.
You need to get blanking plugs for the exhaust.
Cool bro i was so excited for this video. Great job.... 😁. That akrapovích though.. 😱
Ikr! Such a beauty! Cheers Joseph!
I love this guy, and he was great in shawshank redemption as 'Bogs Diamond'
The aftermarket exhaust doesn’t use the O2 sensors that’s why they have them plugged. You have to install block off plates tune and flash the ECU to get rid of the check engine light caused by not having the O2 sensors hooked up.
I love your videos my boy! You are the smartest person I have ever seen!!!
That ain't true 🤣
@@CJMediaOfficial bro it is for real !! I admire your passion about bikes... 👏🏾👏🏾👏🏾👏🏾👏🏾 Can we find you on social media?
@@optimuspower9716 yes sir same username c.j.media!
Your videos are so satisfying bro
Always with a big smile, thanks for the video, God bless brother!!!
That's right 😁😁 God bless as well
Bro!
Great work as usual - and what an amazing exhaust - thank you as always for sharing!
She sure is beauty! Wonderfully made! Cheer mikes!
Love this exhaust !! can`t wait for the next video.
Me too Rafael! Cheers man
Another great video! You should consider purchasing a cheap steam cleaner. Would have been so handy to clean the engine whilst the exhaust was off. Looking forward to the next one 👍🏽
That's a great idea! Thank you
Hell yeah , can't wait to hear that exhaust mate 👌, get your videos out sooner 😆✊👊😎🏍💨🇬🇧
Will do my best Mate! Cheers Dan
I’m jealous of your know how. I’m fixing up a ‘94 cbr600f2 but not from the ground up. My first bike and it’s been a headache. You make great content with some awesome bikes. Keep up the good work
Thank you! Means a lot! It was definitely a huge learning curve for me! I didn't come over night that's for sure! You got this! 👊
The full system is Awesome good choice and best wishes
I agree Momo! Cheers man, hope all is well
I really like your content 👍😂
Very nicely done!! I can't wait for this one, it's really nice bike dude.
Thank you! Me too I am so eager to start it up!
Great progress on the RM1👍
Thanks Ken! She's coming along pretty well so far
Awesome video! Love watching and learning with you 👍👍👍
Thank you Mr! Happy to share w you!
I was eagerly waiting for Part 3 Man.
That's awsome Suraj
Can't wait for finished bike. 🇮🇳
Me too Govind!!
cant wait for the next video
About to drop!
we wait for next part 👍👍👍
Nice views getting on r1 series 😍
lookin good! the foot pegs are rear sets, i haven't herd the word pegs since the bmx days .lol.
🤣 sorry gabe, tomato tom"a"to 🤣
A simple home made bracket will sort the exhaust rear set issue. If you remove the ignition barrel you’ll see a code which you can use to source a replacement key
Chris! Thank you, I have no idea how to remove the ignition barrel without damaging the barrel.
@@CJMediaOfficial I haven’t done it on anything as new as this. In my experience there are normally 2 bolts holding it to the bottom of the top yoke - they are normally security bolts so may need to be drilled out
@@chrisrawle2967 o yes you're right Chris, I thought you meant the barrel inside the ignition module, not the whole ignition itself my mistake
I really like your videos and I always follow from the beginning I wish you the best of luck
I know you are posting these videos as fast as you can but i still hope you would post More often cause i love your videos. 👍🏻😁
Keep up the good work.
Glad to hear it Pekoni! I'll certainly keep that in mind!
@@CJMediaOfficial oh and i started watching your videos litle under a month ago and i have alredy seen them all 😁
@@pekonipoika7537 I'm impressed 🤣
😍ME ENCANTAN,ME FASCINAN TUS VÍDEOS.
ERES GENIAL.SALUDOS😇🙏🇨🇴DESDE COLOMBIA
Do some Q&A video i think people have some good questions to ask.All best from Serbia buddy ✌️
Maybe some day!! Thanks man
Excellent videos bro! You deserve a lot more subs!
Thank you man! Much appreciated
That Akra looks so good 😉👍
I agree Guna!
Good chain tool bro I have to same one with that you can replace chains in like 20 mins 👌👌
I agree it's very nice! I've been seeing people use grinders to remove chains.... I had to pass on that 🤣
Hey Buddy i am from INDIA 🇮🇳 and i am your big fan 👍
Cheers paras!
I’m really enjoying this rebuild vid.🔥🙌🏾😎
Awesome Francis!
I really enjoy your videos. I wish I own 1 like your beautiful bikes your rebuilding. Thats my ultimate dream. I am a big bikes fan but unfortunately I cant afford it. I just enjoy watching your videos.
Keep going for it Christian! You got this
beast get ready on track bro
I loved what you done sir!!!
Thanks sir! Much appreciated
finally uploaded
Much love….
Great video as always ❤
Love from India ❤
Thank you Aaron! Love right back!
Btw what do you thinking about farings? Are u gonna purchase a new one?
I am undecided, there a lot of ideas floating around rn, might go with a few different styles in the end actually
Ummm cuz faring are kinda costly i guess!
New design ( style) would be better!
Akrapovic on R1????? LEZZGOO🔥🔥
Yessss sir!! The best for the best!
Wait for the next episode 🎉❤
Waiting for next part 🇮🇳
🇮🇳🇮🇳
Always support 💪🏼💪🏼💪🏼
You must make a custom bracket to connect the exhaust can to the rear sets...it yould be a big waste if you don't utilize them....bonamici's are solid race quality products and good looking too 👌
They sure are solid! I will have to look into that! I really do want to use the sets!
Haha good man taking the baffle out right away 😂👍
🤣 had to say bye bye immediately
I'm Indonesian, and I like your content bro
🇮🇩
Hi CJ,
You can still use the after market rearset, all you need is the Akr exhaust holder that attaches to the rear foot pad bolts. It comes in carbon fiber and it goes around the exhaust muffler.
Do you mind sending me the R1 exhaust you took out . I will pay for shipping.
Hi Tarik! So the Akra exhaust has a slot for a attachment to the front sets which I'd like to use. I know there is holders that you can slip around the exhaust to the rear peg but it doesn't look as clean IMO.
I was eagerly waiting for your rebuilding video❤️❤️
Thanks Mainuddin!
Very interested to see how you go with the key, I've been told if you loose the red key you cant program a spare key. Good luck!!!
Thank you! Im very curious to see how this will all work too!
We want next part as soon as possible brother
Hi CJ, you don't take your motorcycle engine and things apart to check for internal damage or loose things when making a build?
Hi! I do not, that's a lot of a tear down that doesn't seem necessary, quite possibly something to do in the future tho!
That bike must have been under salt water. Graves is one or the finest American companies out there period .
You're right graves is top notch!
Love from India.. Keep it up bro🤜🤜..
hello friend, I hope you are very well I like it a lot oobwhat are you doing and I wait for the result of that yamaha. excellent project I really like your videos
I appreciate that Juan! Thank you!
So that's why yamaha doesn't have a glass for the lcd. It's glued to motherboard,is it still useable? If u got the new one must be very expensive. And that exhaust is so beautiful 😍😍
Exactly William! A new one is very expensive but I was thinking maybe I can just get a custom piece of glass cut for my dash?? Thanks man I think so too! Cheers 👊
@@CJMediaOfficial i hope so,it will reduce the cost 😁
@@wiliamkurniawan1497 me tooooo
I think that key that was in the ignition was just used to maybe steal the bike? Can’t wait to hear this R1M run with the new exhaust!!
Idk Devon! Definitly strange stuff, thanks man me too!
How did you like the Motion Pro chain tool? I was so close to picking one up for my new chain but I might just go with the Harbor Freight one.
It's very very high quality, I was skeptical at first due to the price but it works great! It's tough to use just a wrench to push and extract the pins so I had to use an impact. Honestly it will probably last me forever and the versatility makes me happy too. All I have to do to break a chain or make a chain, is flip flop that lower grey block. Simple as that. Pretty nifty, alright I'm done talking lol
@@CJMediaOfficial Haha, I appreciate the detailed answer! I have heard good things about it but the price is hard to swallow. 😭
find someone who's gonna look at you in the way he is looking at this complete akrapovic exhaust
😂
Jesus Christ bless you buddy....doing a great job 👌
Thank you Stalin! God bless
I wish i try how feeling draving of big bike
From Philippines 🇵🇭 new subscriber 🥰
Greetings Daniel!
Keep up the great videos man
Thank you
@@CJMediaOfficial thank YOU
man your music choises are cool. and your bulds are Informative, please keep growing
Thanks Joseph! Very happy to hear that!
I like this channel, good luck always bro 👍❤️🇲🇨
Cheers Pamela 🇮🇩
I am from India i have s1000rr pro 2012 model my bike was accident recently the head light were fully broken down bro so u can tell how much it take for changing bro
Part 4 pls , i am very enjoying your videos. From indonesia
Thanks Bram!
yeaa ahirnya vidio anda muncul brow👍👍👍
Amazing project ❤️
I love your videos, and you always put videos very often do do try to put more than 15min video or try to upload regular or 1 day after tomorrow,
Will do my best! Quaility > quantity
Hello bro
Why you not upload other part of R1M bike videos?
Next part is about to go live
Dont go back to stock rearsets. There are aftermarket hangers or once the bike is complete take it to a machineshop and have a hanger fabricated then polish or anodise, easy.
I'll do my best sir! I am a fan of the aftermarket sets. I am not a fan of the rear hanger to exhaust look. If I can get a bracket fabricated I'll try to get it hooked up to the front sets.
Very beautiful work
I'm waiting for this video
I like your videos greetings from Colombia 🇨🇴
Greetings to you in Columbia Luis 🇨🇴