Greetings from Mumbai, India. Have recently come across your channel and must congratulate you on the wonderful and creative designs you come up with. May I ask you, what guage of wire do you use?? Thank you for a reply and hope to see many more beautiful creations from you.
Aplico una fina capa de resina UV negra y curo la capa para que haya muchas posibilidades de que se seque por completo. Además, la capa se encuentra entre las capas transparentes que se curan adecuadamente, por lo que no tengo muchos problemas al respecto.
Hi! Thank you for the beauty!❤Do you not use some kind of finishing coating besides UV resin? After all, UV resin still does not turn out to be as glassy as epoxy🤔...
You can make about 5 earrings using 20 gm UV resin but it also depends on the size and shape of the earring. It will be beneficial to have a UV lamp but it is not necessary. You can let the UV resin cure under the sun as well but it takes more time. On sunny days, UV resin cures faster and better. It needs UV light for reaction to occur and cure, so UV light either from artificial light or sunlight is needed unlike epoxy resin that cures after a day or two.
The tool I am using is a silicone brush. It works just like a normal brush, it does not squirt resin. Many are confused and mistaken about it because of the way the video is edited.😔 I have edited out the parts where I go back and forth to dip the brush in the UV resin to decrease the video length.
Pieces come out easily while using resin tape than other tape. Sometimes the tape residue remains but it is easier to remove them. This usually happens to me when I leave the tape exposed to air for a longer period of time. So, I pour resin as soon as I stick the frames onto the tape.
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Beautiful, I have to try it.
Please do! 😊
I love your vedios.... Nd I will try it.... Hope you will make nxt wonderful earrings..... Love frm INDIA.....
Thank you so much 😀!!❤❤❤❤
Pls try full moon earing plzzzzz
Me gustan mucho tus videos, soy Sandra te saludo desde Bogotá Colombia 🇨🇴💖
Hola Sandra. Muchas gracias.❤❤
As always your creations are so beautiful! Thank you again. Greetings from Washington State USA.
Thank you so much 🥰
Hello from Alabama. I love your videos you make it so easy to follow.
Thank you so much 🥰
Beautiful. Thank you.
My pleasure!
Great video thanks for sharing
You're welcome ☺️
Wuau è bellissimo questo effetto 😮
Grazie mille!😊
Love your work it’s so lovely. What are the small cups you mix the colour resin in thank you
Thank you!! The small cups are actually old silicone molds that I had, used for casting resin.
Beautiful.
Thank you ☺️
Beautiful
Thank you ☺️
Bravissima graziella ❤
grazie anche a te!!❤
Using the foil as a reflector is brilliant!
Cutting foil helps keep scissors sharp.
That is new information to me. I didn't know about it keeping the scissors sharp. Thank you so much ☺️
Which thickness of wire did you use? Beautiful video.
Thank you so much! it is gauge 18 wire.
@@CharmsDIY Thank you.
Greetings from Mumbai, India. Have recently come across your channel and must congratulate you on the wonderful and creative designs you come up with. May I ask you, what guage of wire do you use?? Thank you for a reply and hope to see many more beautiful creations from you.
Thank you so much ☺️. The wire is 1mm thick, gauge 18.
@@CharmsDIY thanx for your quick reply. Will try out one of your designs as soon as i get the wire.
@@babujaan18 good luck 🤞👍
She makes so many unique shapes using a simple piece of wire..
@@jerrycallender9352 thank you for the comment 🥰
Con el papel aluminio se ve muy bonito y de paso le das filo a las tijeras ✂️😉
Gracias😊. Y sí, recientemente me di cuenta de que también afilé mis tijeras.😁 Yo no sabía eso antes.
Te cura bien la resina negra? La luz ultravioleta no pasa a través del negro
Aplico una fina capa de resina UV negra y curo la capa para que haya muchas posibilidades de que se seque por completo. Además, la capa se encuentra entre las capas transparentes que se curan adecuadamente, por lo que no tengo muchos problemas al respecto.
Hi! Thank you for the beauty!❤Do you not use some kind of finishing coating besides UV resin? After all, UV resin still does not turn out to be as glassy as epoxy🤔...
No, I don't. It might not be as glassy as epoxy but it cures hard and fine as long as it cures properly.
How many earring can be made using 20grm UV resin..pls tell me and is it necessary to use UV lamp for drying or it will dry after 1day without uvlamp
You can make about 5 earrings using 20 gm UV resin but it also depends on the size and shape of the earring. It will be beneficial to have a UV lamp but it is not necessary. You can let the UV resin cure under the sun as well but it takes more time. On sunny days, UV resin cures faster and better. It needs UV light for reaction to occur and cure, so UV light either from artificial light or sunlight is needed unlike epoxy resin that cures after a day or two.
@@CharmsDIY Thanks for replying....and ur resin art is amazing...
@@Craftsandcreativity thank you too!!
I have a question about your wire. I noticed how straight it is. When I buy wire it is always coiled. Are there other ways to buy wire?
Mine comes coiled as well. I straighten the wire before using it.
@@CharmsDIY wow! You do a good job straightening them!
What is the tool you are using to squirt the UV resin with??
The tool I am using is a silicone brush. It works just like a normal brush, it does not squirt resin. Many are confused and mistaken about it because of the way the video is edited.😔 I have edited out the parts where I go back and forth to dip the brush in the UV resin to decrease the video length.
What can I use to keep the earring hooks from getting dark or are there earring hooks that don’t turn dark that I can buy
I too have noticed that some earrings hooks get dark with time and some don't. I guess it depends on the quality of the hooks. 🙁
Keeping them in a sealed bags prevents oxidation. You can also purchase a silver jewelry polishing cloth
@@jjzjewelry thank you for the advice ☺
How do you get the cured resin off of the tape so easily? It always sticks and leaves so much tape residue on the backs, for me.
Pieces come out easily while using resin tape than other tape. Sometimes the tape residue remains but it is easier to remove them. This usually happens to me when I leave the tape exposed to air for a longer period of time. So, I pour resin as soon as I stick the frames onto the tape.
@@CharmsDIY Ohhhh that’s a good tip! Thank you dearest!
@@CelestialPopCollectiveOfficial Welcome!!
What size of wire do you use and kind of wire?
Hi! I use 1 mm thick aluminum wire, gauge 18.