kia picanto dismounting front hub bearing

2018 11 10 - bearing buzzed on kia picanto 2009? mileage 115,000 km. Humming on speed for 40 km per hour. When you turn the steering wheel to the left, the hum disappears and increases to the right.
Espra ES139387 Front hub bearing 638 rubles
From MANUAL
1. Remove the front wheels.
2. Remove the drive shaft nut (A) using the brakes.
3. To unscrew two bolts of fastening, then to remove a support and a brake disk.
Suspend the caliper on the front shock absorber using a wire.
4. To disconnect a spherical support (A) tips of a steering
thrust from the steering knuckle (B) using a special
device (0К130 283 021), after removing the locking pin and unscrewing the nut.
5. Remove the wheel speed sensor (A) from the steering knuckle (B).
6. Unscrew the lower mounting bolts (A) of the shock absorber.
7. Unscrew the nut (A), then remove the ball bearing (C) from the steering knuckle (B). Monolith Publishing House
8. Remove the hub and cam assembly.
DISASSEMBLY
1. Remove the retaining ring (A).
2. Install special tools (09517-29000, 09517-21500), as shown in the figure.
3. Disconnect the hub from the steering knuckle by rotating the nut (A) of the special tool (09517-21500).
4. Using a plastic hammer, remove the dust cap from the steering knuckle.
5. Remove the inner ring (B) of the bearing from the hub (A) using a special tool (09495- 33000).
6. Using special tools (09495-33100, 09517-29000), remove the outer ring of the wheel bearing (A) from the steering knuckle (B).

[@ИванИванович-р6ъ3т]

Ну как дождались пыльник? Где продолжение?

[@username-KA]

да давно уже th-cam.com/video/oM9xeK-Ys7E/w-d-xo.html

[@Asita2009]

Откручивать гайки динамометрическим ключом нельзя.

[@username-KA]

Где я так делаю?

[@Антоньян]

можно