Complete Leitner ACS Forged Bed Rack Install and Evaluation
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2024
- In today's video we install the Leitner ACS Forged bed rack to our Jeep Gladiator overland build. I am truly impressed with the versatility, modularity and strength this rack provides considering its weight (or lack there of). Stay tuned for our next video, we install a roof top tent. If you enjoyed today's video, don't hesitate to like and subscribe.
For any questions you can contact or follow us
Contact Info:
Email- gator.overland@gmail.com
Facebook- / jkhartel3
Instagram- @gator_overland
Install Timeline:
Intro- 2:00
Pre-Install Disclaimer- 1:53
Install Instructions and component overview- 2:36
Tools Required- 2:42
Forged Upright A&B Construction Overview- 6:22
Connecting A&B Uprights to Top Bar- 7:34
Completing Driver Side Assembly and Torquing- 8:02
Bed Rail T-Slot Prep- 8:58
Installing Driver Side Assembly to Bed Rail- 9:26
Upright Brace Install to Upright- 10:24
Prep For Upright Brace Bracket to Bed- 10:56
Prep Stationary (forward) Load Bar- 11:55
Install Sliding Load Bar Bracket and Load Bar- 12:43
Confirm Rack Is Square- 13:17
Prep For Drilling Holes In Bed For Upright Brace Bracket- 14:42
Install riv nuts- 16:15
Install Rubber Pad To Load Bars- 19:19
Install Complete- 19:56
Post Install Evaluation and Spec Overview- 19:57
Closing- 24:27
Tools and Links
Leitner Designs- www.leitnerdes...
Riv-nut Setter Tool- amzn.to/3mInrxl
13mm Ratchet Wrench- amzn.to/35XeV7D
Metric Hex Head Socket Set- amzn.to/3cj3EzU
3/8" Drive (10-80 ft/lb)Torque Wrench- amzn.to/32SnQWf
1/2" Drive (10-150 ft/lb) Torque Wrench- amzn.to/2FVSOUq
2 Gal. Water Rotopax- amzn.to/33MRECV
2 Gal. Gasoline Rotopax- amzn.to/3iT0xB9
2 Gal. Diesel Rotopax- amzn.to/2RQ8Y48
Mopar 2" Lift Kit- amzn.to/300znkh
Daystar 3/4" spring spacers (front/rear)- amzn.to/35ZvXlQ
Feel free to check out the channels I follow below. They could informative and influential for some of you.
@TrailRecon
@JKGearandGadgets
@LiteBrite
@TheStradman
@CJBroncoF150
@JLLIFEOFFROAD
@4-LOW
@BuiltForDirt
@venture4wd
@TheStoryTillNow
@LifestyleOverland
@OverlandBound
@TFLoffroad
@TrailBendersOverland
@c130aviator
@DirtLifestyle
@bayoudragons
@OverlandishAdventures
![[Full] 4 ต่อ 4 Celebrity EP.922 | 10 พ.ย. 67 | one31](http://i.ytimg.com/vi/zmV5HRIxIBI/mqdefault.jpg)
Wow…someone who is actually articulate and clear. Great video. Thanks!
That’s what it’s all about.. thanks for taking notice and taking the time to watch and comment… I actually just finished up my one-year review and gen2 gear pod install.. I’ve been really happy with the rack over the past year.. no regrets spending the extra money to go forged.. It’s been A year and I live on the coast and there’s not an ounce of rust anywhere
@@GatorOverland awesome! I’ll go check it out. Thanks!
It won’t be out for a couple weeks because I got a finish up the review in the field in Utah😜
The pvc jig is a great idea! I used an old 2x4 and cut a notch in it so it would hang between the rails. Thank you!
Awesome, glad I could help
Thanks- started installing mine- then got to the part with the bed rails.. just got my Gladiator a few weeks ago... found this video and was informed quickly on my folly.. LOL $300 later and back at it... well done - good tips as well..
Thanks! That’s what it’s a all about!! Just paying it forward! Glad I could help. At about 8:06 in this video I show you how to remove it quickly
th-cam.com/video/aj2n3HVYvqI/w-d-xo.html
Definitely a great system. I really wish there was one made that was compatible with a tonneau cover.
Yes, unfortunately leitner will only work with a retrax style on the full-size trucks per the new tonneau upgrade.
Kbvoodoo and Yakima overhaul hd will work with a roll up/soft tonneau
I am definitely looking at the Leitner ACS for my F150. Your video was excellent. Yes forged version is nice, but at $400 more.... I noticed that your cross bars did not have the "hole" in the t-track to allow you to insert more bolts without disassembly. Other ACS videos, seem to have these extra holes. Why? Sep 2020 version vs. 2021? I have used similar track systems for hold-downs, and having this hole is extremely useful. UPDATE- purchased the Forged ACS. Assembled it to 80% in my living room, due to the -25F weather outside. Your video was good to watch again, but the assembly was actually straightforward. Will mount rack on the F150 as soon as I see +32F. After my own assembly, I am now even more impressed that there are crazy people out there that take the time to make such a GREAT video. Thanks again.
Thanks for taking the time to watch and the kind. I saw your post/question on the other persons question and the whole he was talking about was for assembly not directly to do with the extrusion and adding fasteners… you won’t regret going with a Leitner rack. If you go to my newest video for the pods and see you at about 14:40 I explain why the need for a hole in the extrusion is not necessary.. leitner utilizes extrusion track locknuts… They are a genius design. I also do my one year review in that video so it might make your mind up about Leitner in general, but I recommend spending the extra $400 for the forged
th-cam.com/video/aMrOqDw0fWI/w-d-xo.html
Love the Matte finish. She’s coming along nice! Keep them coming!
Thanks bud. I’m really happy with the outcome !!🤘🏼
Nice I actually order mine two days ago before watching this
Very cool, you made a great choice! I’m very happy with mine. The video could be helpful for your install. If I wasn’t doing it for the video it would take 30-45mins.
For better contact, info, photos and video check us out on
facebook.com/JKHartel3
instagram.com/p/CF-X_58BjDR/?igshid=1r9yo0niyroip
Very high quality video. I just ordered thos system for my Tundra and wanted to see someone install it. Seems easy enough. I just need to buy a torque wrench.
Absolutely! The install is straightforward. You won’t regret it. Aside the tent use, I use the rack all the time.. and bed for that matter.
Nice video! This will be the rack for the Power Wagon I just ordered!
You won’t regret it… Leitner has outstanding products and incredible customer service… I just finished up doing bed/rack lighting… I think you’ll find it very helpful or beneficial for your own build… Check out my reels for a sneak peek
great detail step by step video. subscribed.
Awesome!! That video is for you! Thanks for the kind comment and sub!
Many thanks men, I would go this thing. Great video.
Thanks! You bet! Let me know if you have any questions
Great video with detailed explanations 👍🏼
Thanks for taking the time to comment. More content coming soon!🤘🏼
Great video I have been trying to figure out which one to buy myself. Good information also, you should add the ZRoads rack to the spreadsheet. It is comparable in weight capacity 1500 lbs. static load capacity 800 lbs. on-road load capacity 400 lbs. off-road load capacity and weighs only 125. The lightner is lighter but they have a huge lead time too so i am still on the fence. I had been thinking of going with the fab fours but have decided it's too heavy and doesn't handle near the weight either. Thanks for the great video.
The Zroads rack is fantastic… It was not available at the time that I did the research and video, but I do like the rear hinge lift gate by the tailgate option… 125 pounds is not a bad footprint either… I will say I am at almost a year, and 15,000 miles in with about 5000 miles of travel having a rooftop tent on top, and 3000 of those mile being associated with overlanding trips… It looks just the same as the day I put it together… The fasteners remain tight, the system is quiet… And ultimately there is not one ounce of rust.. I live in Southeast Texas about 30 miles from the coast… Rust is a big issue here…
Sweet video. Thanks for the info.
🤘🏼🤘🏼 is carried our world for the past 25,000 miles of RTT camping … I love it… And to date, still no rust, and not one loosened fastener
Hy John, I appreciate your videos! Tell me something... What type and size nuts and bolts do you use in place of Leitner's very cool but very expensive Traklok nuts or t-bolts? TIA
You bet! I used the fasteners that came with the kit. As far as extra TRAKLOK fasteners, they are costly, but all accessories come with them. I got a dozen extras for here and there’s if I needed them. Maybe other cubicle extrusion tslot fasteners will work too?
Very informative
Thanks for tour reply!
Excellent video!
Thanks for taking the time to watch and comment. The set up had been surprisingly useful even without running the RTT.. no regrets. Investing in the pods soon🤘🏼
@@GatorOverland Professional presentation with solid information. Glad I found your channel - subbed!
Scott
I like the ability to slide that rear crossbar forward.
One big con (at least it seems) is that you aren't able to haul 4x8 sheets with the two pieces of wood and tailgate half up due to the extra rear supports. Can you confirm that this is the case?
That is a very good point. I just went out to check… it will not allow for a 4x8 sheet to go across with the tailgate at the load angle. I do you agree this is a con, but at the same time the rack is more than sufficient for carrying 4 x 8 sheets of plywood if properly strapped. The big con the would be the height. In 20yrs of driving I can count on maybe one hand how many times I’ve carried plywood in the bed of my truck, so hopefully it won’t be an issue for me the future. If it occurs that I really needed it off, it’s eight bolts and probably 15-20mins to freedom. Good question🤘🏼.
@@GatorOverland Another option would be just to stand the 4x8 sheets inside bed, by sliding the load bar forward or use the sliding load bar to lock in the load of 4x8 sheets
Joe Cardenas just confirmed, this will work, but they will have to lean a bit. I wish I could send a pic via TH-cam to show you.
Does anyone know if you can still haul flat sheets of plywood with the ACS brackets installed?
In my gladiator you can get 2 sheets or so depending on thickness. For loading more either move the rear load bar forward and stand the sheets vertically, or you use the load bars on top. You would need to bundle around the sheets with ratchet straps lengthwise and widthwise before securing them to the rack. I’ve hauled sheet rock and 2x6’s this way. The system is capable of 1500lbs.
I've been searching for a solid rack system for my truck for several months now, I have a 1994 ford ranger extended cab stepside. Naturally stepsides are a pain to locate aftermarket equipment for due to the narrow beds at 44", do you think this system would work with my current RIG for overland use? I work for the USFS as a wildland firefighter/faller so spending 8 months of my year in the mountains I'd like to spend those months in comfort with a setup that compliments my work load.
You would have to reach out to them… There may be a model that is similar, or near the dynamics and dimensions of your current vehicle… It’s a lot of investment for something to partially fit. Reach out to Maddie at leitner and tell her John from gator overland sent you..
Great video. Wish they would make a waterproof tarp cover for this. Need to keep it covered for normal day to day usage. Keep the truck bed dry.
I totally agree! I have a few tarp sketch ideas drawn up but haven’t had time to put it into motion. Leitner is working on a cover that works with it as well.. most of my storage is weather proof, dust is my main issue. But the simple solution for now is a few blast of the air compressor solves most of the problem. 🤘🏼
@@GatorOverland my concern is more water related as I deliver parts to customers that can’t get wet. As I use my truck for work and play I need a good solution for both. I have a tarp solution idea that I think will work great. It’s the only thing holding me back for getting the system. I think I need to just sketch it up and see what it looks like lol
We might be in the same path. Mine would incorporate button snaps that work with the extrusion. And probably look a lot like the soft topper by the end of it.. the sides would roll
Up or down safari style over the pod boxes.
softopper.com/products/
@@GatorOverland yes very similar. It’s just about incorporating into the ACS. Also to hide what’s under it lol. I can’t believe they haven’t come out with it yet. Seems like a simple solutions.
I completed the install but over drilled into the truck and now I have a support arm that clicks. Functionally works great but the clicking can get annoying. Any ideas on how to fix this?
Shoot me an email at JKHARTEL3@gmail.com
Nice video. But need a rack that works with soft tonneau cover.
Yes, that is the only drawback.. check out kbvoodoo
can you still add molle panels from jcr or builtright to the bed, after putting on the rack?
Yes, I believe 813 fabrication and design has molle panels designed to fit. I’m going to contact Jeremy soon about a set.
i'm installing the the rack right now. i see there's a hole at 1 end of the crossbars. does it matter which way the holes go?
Sorry for the delay. For better contact, info, photos and video check us out on
facebook.com/JKHartel3
instagram.com/p/CF-X_58BjDR/?igshid=1r9yo0niyroip
Is the "hole" you are talking about just through the top of the track? this could be the hole that allows you to add things using the t-nuts, without having to fully remove the bar every time. I would be curious to know.
How long does it take to install?
It’s a pretty straight forward install, with the right tools and good prep, 2hrs.. it took me 4 doing the video and I made a lot of retakes
I was just wondering, Is the bed of the jeep gladiator wide enough to put an ATV in?
Absolutely! www.google.com/search?q=gladiator+with+ATV&client=safari&hl=en-us&prmd=isvn&sxsrf=ALeKk00r2BVlbtmDMOKdDX375CemeXezgg:1600884061440&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjxzLvu7f_rAhVNXq0KHfnRBe8Q_AUoAXoECBAQAQ&biw=414&bih=714&dpr=3
Absolutely! www.google.com/search?q=gladiator+with+ATV&client=safari&hl=en-us&prmd=isvn&sxsrf=ALeKk00r2BVlbtmDMOKdDX375CemeXezgg:1600884061440&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjxzLvu7f_rAhVNXq0KHfnRBe8Q_AUoAXoECBAQAQ&biw=414&bih=714&dpr=3
Absolutely! www.google.com/search?q=gladiator+with+ATV&client=safari&hl=en-us&prmd=isvn&sxsrf=ALeKk00r2BVlbtmDMOKdDX375CemeXezgg:1600884061440&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjxzLvu7f_rAhVNXq0KHfnRBe8Q_AUoAXoECBAQAQ&biw=414&bih=714&dpr=3
Thanks “Gator_Overland”
It looks like a 2-up person ATV in the back of the JT in one picture. I may have to check that out.
Putco’s full stats aren’t in your chart (“NA”) but they’re 1000lbs static (not 500), 600lbs dynamic, and 300lbs off-road dynamic
Awesome! They may have redesigned since I didn’t my research about a year ago.. good looking racks
no need for Locktite?
There was a form of locking thread compound on the bolts. I check the torque everytime I put the tent back on a and to date they are all as tight as day one.
HAHAHA love the shirt!!!
I came across it on amazon for $5, i couldn't help myself. Dad jokes or bust!!!
I just ordered this rack for my Gladiator yesterday. I got a different rack back in November. But decided I didn't like it
Well if you are considering a Leitner you won’t be upset with it… I’m going on two years with it now and not an ounce of rust… I actually just loaded up my ARB fridge with food for a trip to North Alabama this weekend… I will have a few wiring/lighting tutorial videos coming soon as well so stay tuned… I just uploaded a video this past week for lux ground lights… I just rode 45,000 miles of smiles… Love my JT
Shoot me an email and I would be happy to share photos and camp coordinates with you… JKHARTEL3@gmail.com
I ordered it Monday afternoon. It shipped out yesterday.
Awesome!! Get you a good torque wrench and some Allen socket for convenience of install
Oh yeah I have plenty of tools. What part of Texas are you in. I work out of Baytown and that's where I have my JT parked
I’m just east in fannett (Beaumont) 🤘🏼