Mitch i been a mazda b series fanatic since i was 17 yrs old and im about to turn 38. I owed 5 along the years and regret selling every single one of them, however im in the market for one more project b2200 and this will definitely be one of my top list upgrades. Great video and inf. Keep them coming. Thks.
fantastic work mitch! how did you come up with that? i have 3 mazda B series , a long bed b2200, a short B2600 single cab and a b2600 4x4 extended cab , i hit the jackpot.
Installing 94-97 Honda Accord power window regulators in a Mazda B2000-B2200-2600. I got my regulators from the front doors. It can be a two door or four door but only made sense to get it from the front doors as they are not as small as the rear and closely resemble the truck doors. This ensured I had long enough cable length. This video is a follow up to the written document here www.mazdaminitruckin.com/info/how-to#h.udq5l8sq31y Files and information mazdaminitruckin.com/ Have a Mazda? Join the Facebook Group facebook.com/groups/mazdaminitrucking/ Follow me on Instagram instagram.com/mazdamitch/
I don't yet, I may make one. On the inside and outside of the door glass, the rubber strip has clips every so many inches. Brown on the inside and blue on the outside. Gently lift and use a screwdriver to lift the clip up and out.
Just saw video and def want to try it myself. Just wanted to know if the motors are from a 2 or 4 door or are they the same? Also you said 1995 accord right? Thanks for putting this and all your other stuff up. All the Webber info helped me out tremendously!!!!
Also which is your website? I couldn't find it in the description, I need to get some rubber window channels you showed at the beginning. Thanks for your videos. Subscription added.!
Nice job brother I’m using 1995 Honda accord aftermarket motor regulator. Did you place the passenger motor same location side as the driver side? Having difficulty placing it and I have not done the driver side yet and hoping that there will not be any issue. Do you mind sharing the location(photo) of the motor on the passenger side? Truly appreciate it
Hey brother it’s me once again. Please be patient with me on this window conversation. Now that both motors are installed inside the window cavities. How were you able to route the wires from the door to the other side and what materials did you use to avoid the wires from getting pinched? Thank you once again.
I’m needing the channel that the window glass rides in up and down on the pillar next to the door lock on the drivers side. Do you have a link to where I can get that piece of rubber at or at least what it’s called???
Hey Mitch I picked up some 97 window motors and need some help. Driver side has 4 wire connector. Pass has 2 wire. Which 2 wires do I use for driver side. I’ll be using independent switches not a master on driver side.
Mazda Mitch didn't say if those window regulators came from a sedan or a coupe. Sedan has front and rear regulators, being different I'm assuming. I wonder?????
Awesome video boss! Could this be possible to try on an 86 toyota door? I won't hold you to it but finding a set of 4runner doors with power windows is tough. Keep them coming!
@@MazdaMitch will do some research. My doors are probably thinner than a mazda door, so like what you thought would happen with your door and the motor possibly scratching the glass.
Mitch i been a mazda b series fanatic since i was 17 yrs old and im about to turn 38. I owed 5 along the years and regret selling every single one of them, however im in the market for one more project b2200 and this will definitely be one of my top list upgrades. Great video and inf. Keep them coming. Thks.
Well thanks to you I now have to make a trip to the junkyard to find some window motors and I appreciate it :)
🤣🤣🤣👍
Nice video Mitch,can u make a video showing how to connect those cables in the truck, I don't want to make a fire in my truck
I just got a b 22 and I'm so excited I found your page I've learned a lot from you keep up the good job
fantastic work mitch! how did you come up with that? i have 3 mazda B series , a long bed b2200, a short B2600 single cab and a b2600 4x4 extended cab , i hit the jackpot.
Installing 94-97 Honda Accord power window regulators in a Mazda B2000-B2200-2600.
I got my regulators from the front doors. It can be a two door or four door but only made sense to get it from the front doors as they are not as small as the rear and closely resemble the truck doors. This ensured I had long enough cable length.
This video is a follow up to the written document here
www.mazdaminitruckin.com/info/how-to#h.udq5l8sq31y
Files and information
mazdaminitruckin.com/
Have a Mazda? Join the Facebook Group
facebook.com/groups/mazdaminitrucking/
Follow me on Instagram
instagram.com/mazdamitch/
Mitch, do you have a video on how to replace the side door rubbers for the b2200? Or the link to buy them? Thank you for the videos!!
I don't yet, I may make one.
On the inside and outside of the door glass, the rubber strip has clips every so many inches. Brown on the inside and blue on the outside. Gently lift and use a screwdriver to lift the clip up and out.
Just saw video and def want to try it myself. Just wanted to know if the motors are from a 2 or 4 door or are they the same? Also you said 1995 accord right? Thanks for putting this and all your other stuff up. All the Webber info helped me out tremendously!!!!
I got the motors and tracks from the front doors
MazdaMitch where can I order one of your shirts??
@@andyvega8220 you can click the website link in the description and click shop tab on the website
Great video Mitch, can you clarify which car was the donor, 2 door or 4 door?
Also which is your website? I couldn't find it in the description, I need to get some rubber window channels you showed at the beginning. Thanks for your videos. Subscription added.!
I go my motors and tracks from the front doors. Only made sense as I wanted to be sure the cable and track length was similar to my truck doors.
So you got them motors from a 4 door, right?
Thanks for the video I will be doing this ASAP
Nice job brother
I’m using 1995 Honda accord aftermarket motor regulator. Did you place the passenger motor same location side as the driver side? Having difficulty placing it and I have not done the driver side yet and hoping that there will not be any issue. Do you mind sharing the location(photo) of the motor on the passenger side? Truly appreciate it
Same spot each side.
I realize the belt moldings are not on the door but is the glass stopping before it is rolled all the way down below the belt molding level?
They go all the way down. I have several videos showing the windows going up and down. Watch my truck tour video.
Hi
Well done. Did you use power window regulator from 4 or 2 door Honda accord.
Front doors are all that will work. The rear is not long enough
Hey brother it’s me once again. Please be patient with me on this window conversation. Now that both motors are installed inside the window cavities. How were you able to route the wires from the door to the other side and what materials did you use to avoid the wires from getting pinched? Thank you once again.
Just look at your door there's some vent places in the door I ran my wires through there and drilled a hole into the cab side.
Soon get hot...i will do that...im got my bed truck out....i will paint the frame ...waht paint do you think is good...??
I’m needing the channel that the window glass rides in up and down on the pillar next to the door lock on the drivers side. Do you have a link to where I can get that piece of rubber at or at least what it’s called???
mazdaminitruckin.com the parts list
Would like to do this but wonder if i can use a after market switch.
An aftermarket switch would be easy.
Is there a difference between the coupe and sedan window regulators might order a set today?
What size were the bolts holding the regulator?
I used the bolts that came with the regulator. When I pulled them at the junkyard I got the bolts too
FYI: M6 x 1.0
Hey Mitch I picked up some 97 window motors and need some help. Driver side has 4 wire connector. Pass has 2 wire. Which 2 wires do I use for driver side. I’ll be using independent switches not a master on driver side.
The two fattest wires I think. Touch them to a battery like I do in the videos and test to find your wires.
Mazda Mitch didn't say if those window regulators came from a sedan or a coupe. Sedan has front and rear regulators, being different I'm assuming. I wonder?????
Check the first comment.
Awesome video boss! Could this be possible to try on an 86 toyota door? I won't hold you to it but finding a set of 4runner doors with power windows is tough. Keep them coming!
You could try it. Thats what customization and fabrication is all about.
@@MazdaMitch will do some research. My doors are probably thinner than a mazda door, so like what you thought would happen with your door and the motor possibly scratching the glass.
Hi mate how do you remove the a/c switch in the dash out of a 98 Mazda bravo thanks
Remove the glove box and unplug it
MazdaMitch thanks
What is spark plug gap on 92 b2200 carbuerated. 2.2
.028-.033 is a good place mazdaminitruckin.com/faq/
Do you happen to sell this already done?
No I do not, I simply show what I have done and help others do it themselves by showing how.
Looking for parts...
Hey Mitch. What type of switches are you using? How’d you wire them .
The answers you seek are in this post on Facebook facebook.com/groups/mazdaminitrucking/permalink/1147826668888364/
More videos pleas
Windows 10 or 11?
Windows 95