@@NyagahDenis No, but I figured it out... basically you position the valve where it should sit normally on the filling machine. Then play with it so that you understand when the valve is filling product into a bottle/jar vs when it's intaking product from the hopper. Then, position the valve in the filling position, and lock the piston arm to the valve arm in place in its most forward position so that it doesn't bang against itself. After you have it working, score the piston arm and the pin that rotates the valve so that if it ever happens again, you can line them up much faster.
Thanks for the help!
Would love to know how to correctly re-attach the 3-way valve arm if it was disconnected and the valve timing is off.. Asking for a friend!
Hello Mr. John!
Did you receive any feedback?
@@NyagahDenis No, but I figured it out... basically you position the valve where it should sit normally on the filling machine. Then play with it so that you understand when the valve is filling product into a bottle/jar vs when it's intaking product from the hopper. Then, position the valve in the filling position, and lock the piston arm to the valve arm in place in its most forward position so that it doesn't bang against itself.
After you have it working, score the piston arm and the pin that rotates the valve so that if it ever happens again, you can line them up much faster.
@@JohnFixes Thank you for the reply. This is very informative.
What size of air compressor is right for the machine
where can i buy parts for that machine? i need the automatic switch or part? thanks
Manual cleaning as opposed to CIP?
Can I ask something why the pidal there's no air
Price?