How NOT to stand on a ladder!
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- How NOT to stand on a ladder!
In this short, Josh with Landers Electric explains how NOT to stand on a ladder.
📢SHOUTOUT TO ALL MY SUPER FANS!!!📢 If you got value out of this video, feel free to donate a SUPER THANKS! I really appreciate the support that will hopefully enable me to continue making content like this for years to come!
🔔 Subscribe for more videos just like this 🔔
/ @landerselectric
FULL TOOL LIST
DISCLAIMER: Links in the description may be affiliate links. I do receive a small commission if you purchase using my links but I want to make sure you know that these are tools I use everyday and have used for years and stand behind.
I will constantly monitor the tools on this list to ensure that anyone using these links are only purchasing tools of the highest quality.
If you need tools, I would greatly appreciate you using my links because it will help me continue to produce content hopefully for years to come.
Thanks for your continued support!
Klein Tools Wire Strippers: amzn.to/3SSLVpi
Klein Tools Diagonal Cutting Pliers: amzn.to/3SRFOBL
Klein Tools Needle Nose Pliers: amzn.to/4czXhWe
Klein Tools 6” Torpedo Level: amzn.to/3ACt9MA
Milwaukee Phillips #2 Insulated Screwdriver: amzn.to/4cxaUpp
Milwaukee 1/4" Slotted Insulated Screwdriver: amzn.to/3SSokFk
Milwaukee ECX #2 Screwdriver (For Breakers and Panel Screws): amzn.to/3WIlmUQ
Milwaukee ECX #1 Screwdriver (For Receptacle and Light Switch Screws): amzn.to/4cuf6pU
Milwaukee Impact Ready Nut Driver Set: amzn.to/3WOKQjt
Stanley QuickChange Retractable Utility Knife: amzn.to/3YNqo58
Stanley FatMax 25’ Tape Measure: amzn.to/3SSMBuQ
Knipex Cobra Water Pump Pliers: amzn.to/4dNvbrD
Fluke Non-Contact Voltage Tester: amzn.to/46SEbJL
Fluke T5-1000 Multi-Meter: amzn.to/4gI9N9J
Electrical work is EXTREMELY dangerous and should only be performed by licensed professionals. Landers Electric assumes no responsibility for injury or damage to persons or property for the information in this video. Any personal injury, damage, or loss that results from attempting to recreate or perform the tasks displayed in this video is solely the responsibility of the viewer and not the fault or responsibility of Landers Electric. Landers Electric will not be held liable or at fault for any of the any of the information or examples displayed in this video. The information in this video is for entertainment and informational purposes only. Please contact a licensed electrician for any and all electrical projects you need completed.
For business inquiries, email info@landerselectric.net
#electrical #electrician #electricity
My guys caught a guy standing on top of a ladder. STOP standing on ladders like this! Have any of you fallen off a ladder or known someone who fell off a ladder?
Fallen off a ladder quite a few times, the only time I was injured was when I had a harness on
Hes in the tbar which he can steady himself on. I hate that stupid rule. Stand on the top of the ladder who cares. Just don’t be unstable on a ladder in general and you’ll be fine. It’s common sense
Open Reduction Internal Fixation (ORIF) is the name of the surgery for compound fractures of the upper or lower extremities secondary to falls.
It’s not worth it!
I’ve had two from bike crashes . They hurt.
Literally everyone has done that. What are you going to do? Run to another floor grab a 8 or worse 10 foot ladder? Im willing to bet you've done that your self.
Just bringing a reminder that it’s not safe. Take the time to go grab another ladder.
I was always told only TOOLS &FOOLS Stand on top of ladders
Why don’t you say something when you see something. Instead you make a video.
Visuals are helpful as well!
Literally everybody has done this. Yes, it's not smart to do, and avoid at all costs (bring correct equipment for the job). But there'll be that one instance where it's necessary to do so, just be extremely careful.
Everyone does this
This is why i cant stand union guys....completely sold out to osha what a bunch cry babies. Ohhh "safty is no accident" yall need to watch mike rows safty 3rd ted talk.