With li ion batteries model 18650, three important things are considered: 1) model 18650, 2) voltage 3.7V, 3) capacity (battery capacity is expressed in mAh)
First of all you should not solder the battery. Second you should check the capacity of the battery to make sure the cell is equivalent to each other. Anyway its nice videos
With li ion batteries model 18650, three important things are considered: 1) model 18650, 2) voltage 3.7V, 3) capacity (battery capacity is expressed in mAh)
Nice, but every thing with out calculations, battery charger for cell require 12.6 v for 100% charge, not calculated cell MAh batter used same mah, not included safety circuits spatially over heating, must b included volt and amp meter. But good 👍
You can use a 14/15v charger Even an 19.2v charger such as laptop chargers The only condition is the amperage is not big enough to rise the voltage on the poles You have to measure under 12.6v other than that Bms willl block charging, thinking it's full To mention that some bms measure the voltage before activation of MOSFETs, those bms require 13v to charge 3s
Excelente proyecto y estupendo resultado obtenido de la fabricacion, de banco de energía de 220 V con una batería vieja para computadora portátil, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏💯💯💯💯
420wh of capacity in the battery If the batteries are 2600mAh on average So in each cell ( 2.6Ah×3.7 =10wh ) The battery contain 42 cells so 42×10wh = 420wh
First of all no safety like the batteries are soldered together which is highly dangerous and then there is not coverages to the batter he just used normal flammable plastics and then he uses a square wave inverter which is not suitable for smart devices like phone chargers and etc. so please do not repeat this project guys it’s really not safe and he makes money of out this useless video
With li ion batteries model 18650, three important things are considered:
1) model 18650,
2) voltage 3.7V,
3) capacity (battery capacity is expressed in mAh)
with this pack wh is more correct because the pack that he made has 3 cells in series so it shows the actual capacity
First of all you should not solder the battery. Second you should check the capacity of the battery to make sure the cell is equivalent to each other. Anyway its nice videos
With li ion batteries model 18650, three important things are considered:
1) model 18650,
2) voltage 3.7V,
3) capacity (battery capacity is expressed in mAh)
He did measure everything
Soldering is not 🚫
using recycled cells like that without regard to their capacities is a sure way to start an electric fire.
This is Nice ❤
i like this . looks neat and can be commercially sold when done correctly.
Nice, but every thing with out calculations, battery charger for cell require 12.6 v for 100% charge, not calculated cell MAh batter used same mah, not included safety circuits spatially over heating, must b included volt and amp meter. But good 👍
You can use a 14/15v charger
Even an 19.2v charger such as laptop chargers
The only condition is the amperage is not big enough to rise the voltage on the poles
You have to measure under 12.6v other than that
Bms willl block charging, thinking it's full
To mention that some bms measure the voltage before activation of MOSFETs, those bms require 13v to charge 3s
10:15 - 10:29 aa gya swad...!😂😂
Half Brick made by nokia..
🤣
I like your editing
Amazing 🔥
Excelente proyecto y estupendo resultado obtenido de la fabricacion, de banco de energía de 220 V con una batería vieja para computadora portátil, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏💯💯💯💯
First.... love from India
Thank you
Very nice👍👍
Super awesome 👏 👍
I wish I had known about this channel before
Yes but some things are dangerously wrong
Love from nepal
You are awesome 🤩🤩
On voit que le courant est faible
C'est juste pour le dépannage
👏
Excellent, thanks.
Verii goot+++++
Bhai please make a petrol engine for fridge compressor
Tutorial DIY cas dengan menggunakan solar penal bro tolong
To make your work easy the easiest thing is buy original power bank
Nice wish that good to make things that take
Bro ye backup kitna dega ????
So super
Nice Amazing🔥🔥
Super 👍👍👍
What circuit does it use? series or parallel
I love it
What is the sizes of your case ?bro
It's all fun and games until the battery over heat and blowhp
That's why a BMS is used
Kya ham 2 alag alag mah ki lithium ion battery ko parallel me jod ke charge kar sakte hai 🤔🤔🕵️🕵️🕵️🕵️
Muito bom 👏
Nice .
What are the things we need? can you write it down?
My dear ,friend i am using your video
Como recarga las baterias iternas? como sabe que nivel de energia le queda? no explica
Caan you build one for me I want to buy and try it
Nice
thanks
what is the price ?
GOOD JOB MAN!
Grinds one nail, battery drops to 75%
good idie 😋
6:16 Parkside!
noting to say,,,,always good...amazing...💓💓💓💓💓
Good good good
Thank bro
50w backup?
420wh of capacity in the battery
If the batteries are 2600mAh on average
So in each cell ( 2.6Ah×3.7 =10wh )
The battery contain 42 cells so
42×10wh = 420wh
OMG Don't use solder on 18650 batteries it will nearly destroy them Use SPOT WELDING.
I agree.
at least put battery indicator.. how will u know ur battery is full..?
Succsessfuly to make a 220v Power Bank
Bro did u test the capacity of each cell
:) hmm nice
Thank you!
where's the box from?
Did you make it yourself?
box size?
Backup time?
Hi bro
hi
Hi
@@nda thank you bro
Your project is so amazing 😍🤩😜
Wow
Agar ksi na ya lana ho to la Sakta ha
👌👌👌👌
Where did you buy that box?
телевизор подключи
Да
You only just made a lithium ion battery pack🤣🤣
На видео инвертор такой не может быть на 600 Вт./в пике 1200.. обман зрителей ☝️😇
Battery how to charge???🤔🤔🤔
niceee
bomb has been planted
What are the pvc box dimensions?
No idea.. nothing is given
Chào pác!
Bateria de computador ?
Sim, Notebook
You could have give me one of the old battery for my old laptop. Now my laptop is useless
Soldering is not a good idea for li-ion battery's
see Mr CarlsonLab video first..
PLezz shar witj degram
Hi
Hadir nyimak..
Vreau și eu una
1200w inverter . But inside😂😂😂😂😂 250w 😂😂😂😂😂😂😁
Inverter 1200w ka ha mohammad ali
😄😄😄😄
@@antiquecreativity 1200w is marked outside inverter box - but under PCB board capacity 250-280w 😂😂😂😂
Lô
hello bro
Ajingh
Sell it to me but I am from Nigeria
Ye bata ta kuch hai nai bas bana deta he 🙄
First of all no safety like the batteries are soldered together which is highly dangerous and then there is not coverages to the batter he just used normal flammable plastics and then he uses a square wave inverter which is not suitable for smart devices like phone chargers and etc. so please do not repeat this project guys it’s really not safe and he makes money of out this useless video
Wedscc
bad work、
Ngon...
Vreau și sunt suna
Nice
Hi