@@miznitic5574 What is your problem? The left and the right venom is nauseating. It’s just like saying you can’t be friends with a Biden supporter if you are a republican. Your remark was shallow.
@@TunTavernWarrior2 The fact that he's supporting a traitor who attempted a coup is nauseating. Keeping that flag up is an insult to the people that died that day, or those that died because of trump's inaction from COVID.
@@rubenr7650 I thought that he was getting the body refurbished. It looks like they created a brand new body from the ground up and ditched the pile of rust that used to be the body of the bronco.
Nice to see folks showing proprietary secrets of hanging bronco body panels and coyote swap body mods . Some shops try to hide every thing and I get it. I'm just glade my 77 required no sheet metal replacement when did its restoration a few years ago.
I’ve built 3 broncos… looking at #4. This ‘73 is rusted out enough that I’m just going to build a body and these how-to videos have convinced me to go for it. Thanks!!!
New Sub, this is the stuff I Love to watch. I am working on building a channel. My buddies channels are doing good, and they wanted me to start one. I am finally gonna be doun bodywork soon., so I am soaking in all that I can, cause I ain't no pro, but I know enough...lol
Hey guys love the video, I’m building a bronco body with my dad and would love to know where you got some Of the measurements from. All the help I can get haha. Learned a ton, thank you!
The two main measurements is in the video under key measurements under the time codes. The two most important measurements on the entire build is 37 1/16 from the back of the floor panel where the quarter panel sits on that lip of the floor to the edge of the kick panel that attaches to the inner rocker. The 2nd measurements is from the floor to the top of the A-pillar. You need to go back to the video to kmow what I mean. The gap between the taillight buckets is 58 1/4 for the tailgate to fit perfectly.
Thanks for the great video. You mentioned the 21" measurement reference point on the passenger side but not the drivers side, just that "they're the same", but the drivers side cowl is a different shape at the top. Can you elaborate a bit more on what point at the top of the driver side cowl is 21" to the floor? Thanks! Edit: My passenger door was spot-on thanks to you.
I'm about to redo both quarter panels because rust is protruding. Why not weld them together on both sides? Why do you spot weld instead of run beads? Love the video. Thank you
What happened to the Bronco? No words at all in regards to the bronco from Jose @ DIY. Did he get rid of it? BTW I like the Trump banner in the background. 👍🏽👍🏽👍🏽 LETS GO BRANDON!!!
Checking to see if on one of your builds, Early Bronco, you used nut rivets to hold the window frame to the window frame cowl? IF you did could you tell me know you did it. Thank you Tony
Hey guys I have the same body kit and was wondering that support brace on the bed part how far back is that on the bed? What’s that measurement? Thanks guys love the content
Heck of a job guys, but Jose has so many things going on he may have forgot he's building a Bronco. Who do you buy your panels from? They look better than original Ford panels. Ballpark figure on your body assembly?
Where are you ordering your parts from? I see such big differences in the way the kick panels, pillers, floorpans, etc... are being cut between the different Bronco suppliers....
The only difference between all the panels are the colors. Unless it's original they all are coming from the same supplier and trust me when I say these parts definitely have to be minupulated to fit perfectly. None of them just line up. We source the sheet metal from anyone that has them in stock right now.
Jose's tub is lookin mean. You guys don't use Steel it or any other weld thru primer ? How come ? What's your reasoning ? From one fabricator to another...... great job guys !!!
I love José, but it seems like he bought the bronco for the VIN number rather than rebuilding his. I understand how hard it is to find one that’s not so rusted
Was going to watch until I seen the political flag hanging. Hate it when channels try and shove their political views down my throat, this is not why I watch these channels. Good luck with the build, but now I'm going to reconsider my DIY Gang subscription.
you do know you can support a business even if you arent a trump supporter.. if i saw a trump flag in my mechanics shop i wouldnt care. as long as they arent putting the sign on my car
and its not shoving political views down your throat.. its just hanging there in the background. did he once say trumps name in the video?? did he say bidens name in the video??
Sorry you feel that way, no matter who support I really wouldn't care as long as you work hard, a good person, and just want to be a better person today then you were yesterday that's all that matters. Who cares about a flag bro, come on now!!!
@@mbimotorsports1003 Trump doesn't believe in that. He believes in division and people died because of him. Supporters of his were misinformed. Continued supporters of him are scum.
@@miznitic5574 I'm not a Trump supporter and you are in denial. And if you are talking about the people who died from Covid early on. Covid was in America before the shutdowns. No decision will keep everyone from dying.
@@72Dexter72Manley72 I'm talking about COVID and the failed coup attempt in January. Keeping that banner up is indicative of the type of person you are.
@@miznitic5574 Since Covid was in America at the end of 2019, why are you Rambling ?. It was already here. Some of the people were getting sick in November had Covid. It wasn't just an American take over. It was/is a Financial takeover of the worlds money. This crap has been going on for decades. Where have you been ?. Lol 🤦🏽♂️🤦🏽♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️
Guys awesome video! I know I'm late. Buy super excited!!
Why are you buying stuff from a trump supporter?
@@miznitic5574 What is your problem? The left and the right venom is nauseating. It’s just like saying you can’t be friends with a Biden supporter if you are a republican. Your remark was shallow.
@@TunTavernWarrior2 The fact that he's supporting a traitor who attempted a coup is nauseating. Keeping that flag up is an insult to the people that died that day, or those that died because of trump's inaction from COVID.
So this is where the bronco has been at jose?
@@rubenr7650 I thought that he was getting the body refurbished. It looks like they created a brand new body from the ground up and ditched the pile of rust that used to be the body of the bronco.
Nice to see folks showing proprietary secrets of hanging bronco body panels and coyote swap body mods . Some shops try to hide every thing and I get it. I'm just glade my 77 required no sheet metal replacement when did its restoration a few years ago.
I’ve built 3 broncos… looking at #4. This ‘73 is rusted out enough that I’m just going to build a body and these how-to videos have convinced me to go for it. Thanks!!!
great work guys
Thanks for the great video, keep up the great work!!!!
Great video boys! Don't change a thing. Really enjoyed it. And thank you for spending the time to make this content. Look forward to more videos.
New Sub, this is the stuff I Love to watch. I am working on building a channel. My buddies channels are doing good, and they wanted me to start one. I am finally gonna be doun bodywork soon., so I am soaking in all that I can, cause I ain't no pro, but I know enough...lol
Just found the channel. Freaking AWESOME!! Next you need to do a BIG beasty BLAZER!!😎🤗
We will be doing a Scout and Blazer here soon.
Awesome video guys! Keep up that great content! 🤙
Thank you we appreciate it
Thank you for the video! measurements of the body cart? does anyone have them
Nice work 👍🏻
Pro tip weld through primer
Great info, can you share your supplier for the body panels?
Hey guys love the video, I’m building a bronco body with my dad and would love to know where you got some
Of the measurements from. All the help I can get haha. Learned a ton, thank you!
The two main measurements is in the video under key measurements under the time codes. The two most important measurements on the entire build is 37 1/16 from the back of the floor panel where the quarter panel sits on that lip of the floor to the edge of the kick panel that attaches to the inner rocker. The 2nd measurements is from the floor to the top of the A-pillar. You need to go back to the video to kmow what I mean. The gap between the taillight buckets is 58 1/4 for the tailgate to fit perfectly.
Thanks for the great video. You mentioned the 21" measurement reference point on the passenger side but not the drivers side, just that "they're the same", but the drivers side cowl is a different shape at the top. Can you elaborate a bit more on what point at the top of the driver side cowl is 21" to the floor? Thanks! Edit: My passenger door was spot-on thanks to you.
Who supplies your body panels?
Have you guys ever put one of those bodies together with panel bond and if so how did it work
I'm about to redo both quarter panels because rust is protruding. Why not weld them together on both sides? Why do you spot weld instead of run beads? Love the video. Thank you
Great video and awesome work. I have a question. Do you do any custom work for the Bronco like stretching the wheelbase.
What happened to the Bronco?
No words at all in regards to the bronco from Jose @ DIY.
Did he get rid of it?
BTW I like the Trump banner in the background. 👍🏽👍🏽👍🏽
LETS GO BRANDON!!!
Checking to see if on one of your builds, Early Bronco, you used nut rivets to hold the window frame to the window frame cowl? IF you did could you tell me know you did it. Thank you Tony
What about using durabond and spot welds??
Wouldn't that make it a nice ridged tub and stronger? Or is it unnecessary overkill??
Yeah definitely overkill
What is your measurement from the floor pan to the top of the B Pillar?
22"
@@mbimotorsports1003 Is it 21" or 22" ??
Hey, when you guys coming back? Needing some MBI action..
How many hours approx. does it take to build a body from scratch?? Thanks Great Videos!!!!
The first gen came with the 302 V-8, so why are you concerned about width? Or is the newer coyote motor wider than the old v-8?
It's way wider
Hey guys I have the same body kit and was wondering that support brace on the bed part how far back is that on the bed? What’s that measurement? Thanks guys love the content
Also I have the same bed and wondering what the 2 holes are for where the back support goes halfway through the bed
Who did you buy the body kit from?
Heck of a job guys, but Jose has so many things going on he may have forgot he's building a Bronco. Who do you buy your panels from? They look better than original Ford panels. Ballpark figure on your body assembly?
A full body is $15,000 with door latches and a fully assembled tailgate and perfect body gaps.
But who do you buy the panels from?
Where are you ordering your parts from? I see such big differences in the way the kick panels, pillers, floorpans, etc... are being cut between the different Bronco suppliers....
The only difference between all the panels are the colors. Unless it's original they all are coming from the same supplier and trust me when I say these parts definitely have to be minupulated to fit perfectly. None of them just line up. We source the sheet metal from anyone that has them in stock right now.
So just buy a frame and call you guys for the tub. Why buy a junker? Nice job thanks for the education!
Yup that's all it takes and your very welcome
More videos
Jose's tub is lookin mean. You guys don't use Steel it or any other weld thru primer ? How come ? What's your reasoning ? From one fabricator to another...... great job guys !!!
I love José, but it seems like he bought the bronco for the VIN number rather than rebuilding his. I understand how hard it is to find one that’s not so rusted
❤🇺🇸👍
Does anybody know what happened to the diy gang ? Loved this channel now nothing.
Sub to this channel cause of diy gang
less talk more work... lol
@@mbimotorsports1003 I only started watching your chennel because it's diy gangs body but I'm definitely going to start watching it more
Should have left the Trump flag up.
Trump flag , love you already! 😍
He removed by 8 minute time mark WHY?
WTF! I'd give you a thumbs up BUT you took down your Trump flag in the middle of the video, put it back up.
Not happening get lost then
Was going to watch until I seen the political flag hanging. Hate it when channels try and shove their political views down my throat, this is not why I watch these channels. Good luck with the build, but now I'm going to reconsider my DIY Gang subscription.
Hey no problem, do what you need!
you do know you can support a business even if you arent a trump supporter.. if i saw a trump flag in my mechanics shop i wouldnt care. as long as they arent putting the sign on my car
and its not shoving political views down your throat.. its just hanging there in the background. did he once say trumps name in the video?? did he say bidens name in the video??
Trump flag. Booo Hisssssss!
Sorry you feel that way, no matter who support I really wouldn't care as long as you work hard, a good person, and just want to be a better person today then you were yesterday that's all that matters.
Who cares about a flag bro, come on now!!!
@@mbimotorsports1003 Trump doesn't believe in that. He believes in division and people died because of him. Supporters of his were misinformed. Continued supporters of him are scum.
@@miznitic5574 I'm not a Trump supporter and you are in denial. And if you are talking about the people who died from Covid early on. Covid was in America before the shutdowns. No decision will keep everyone from dying.
@@72Dexter72Manley72 I'm talking about COVID and the failed coup attempt in January. Keeping that banner up is indicative of the type of person you are.
@@miznitic5574 Since Covid was in America at the end of 2019, why are you Rambling ?. It was already here. Some of the people were getting sick in November had Covid.
It wasn't just an American take over. It was/is a Financial takeover of the worlds money. This crap has been going on for decades. Where have you been ?. Lol 🤦🏽♂️🤦🏽♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️
Oops. 0:50 into the vid and is that a trump flag? Thumbs down and Good bye.
Bye bye
Another Biden supporter....lol