Konnected Alarm Panel Pro Install | New Construction Pre-wired Smart Alarm: Konnected + SmartThings
ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2024
- Konnected founder Nate Clark walks us through a Konnected Alarm Panel Pro install in a brand new new home. Find out how easy it is to install the Alarm Panel Pro in a pre-wired new home and turn it into a smart home!
About the Konnected Alarm Panel Pro:
The Konnected Alarm Panel Pro is an Ethernet-enabled easy DIY solution to retrofit any wired alarm system to work with leading consumer smart home platforms, allowing you to monitor and control your home from anywhere without monthly fees!
Automate and interact with thousands of smart home products and apps using SmartThings, Alexa, Home Assistant, Hubitat, Homebridge or OpenHab.
*Konnected Alarm Panel Pro Kit *
konnected.io/collections/shop...
*Konnected Alarm Panel Board Only *
konnected.io/collections/shop... - วิทยาศาสตร์และเทคโนโลยี
![ไม่ต้องมีที่ที่ให้ฉันอยู่ แต่ขอแค่มีฉันอยู่ก็พอ (Spaceless) - getsunova [OFFICIAL MV]](http://i.ytimg.com/vi/4N8idbxZ-7M/mqdefault.jpg)
![[LIVE] ย้อนวันวานกับนางเอกยุค 90's #คุยให้เด็กมันฟัง EP.42 (8/6/67)](http://i.ytimg.com/vi/MslQDdFwULE/mqdefault.jpg)
This was amazingly done. I learned so much. Thank you!
Awesome progress Nate. Wasn't that long ago when it was just source code on an esp in the forums!
Thank you so much, you are a perfect teacher
great job at explaining the install
Great video, Nate!
brilliant video thank you!
Simple and clean
Love the POE option, Im already wiring my POE cameras up and it will be easy enough to drop a cat6 cable to where the previous owners had the panel installed, and I can get rid of the old power cable that was ran up, over the door frame, and through the wall to an outlet.
Hey! Great video! I want 24 zones in my new house (no alarm, just pre-wired). Should i purchase 2 Pro Interface Kits or 1 Pro Interface Kit and 1 Alarm Panel Pro (board only)?
Also, another question is, where do you use the modules of the Pro Interface Kit in this installation. There is no mention for modules in this video but in the site it says that it is necessary for installing the first alarm of a new house.
Thank you very much! Konnected definetely covers a big gap in the wired alarm systems for smart hime! Great great job!
I'd love to see a video and/or step by step instructions on setting up the tablet with Action Tiles and Fully Kiosk Browser.
In the future when making a video like this it be really helpful to have a diagram of the board up and showing where the wires go. Some of the shots are blurry and not very clear, like connecting the alarm panel power and buzzer. Also one huge thing that tripped me up when installing this was my pre-wire did not have any sensors on the windows or doors. Everything was showing open in Home Assistant but when I would go to open a window nothing change. Luckily connected support is really good about responding quickly. I bought some sensors on Amazon and now it seems to be working. Only do this if you’re a techie and have time. Also shout out to the start up engine campaign I am vested
I would also love if your shop could carry a case that could hold the board and could install in my smart panel well. Also the sensors make a lot of sense to also carry in your store.
Very cool.. .thanks for that breakthrough setup. Exactly what I was wanting to see before jumping in.
Are there options for non-cloud options that still does alerts using, say.. an SMS gateway or the like?
Yes look at Home Assistant or Hubitat
great video, thank you fr sharing i have a siren connected to a 9v battery, open all the windows and doors, i connect the siren to a pair of wires go throught the eme closing every door and window till i hear the alarm sound. that is how i identify which wire is which when i am working alone. if its a bigger home i group wire together than when i find the group of wires that my door or window is in i do one by one. the other 4 conductor wire may be for a second keypad in master bedroom.
It's nice that you're an alarm tech. LOL.
At 23:05 you mention that the power from the keypad cables is enough to power one tablet, but not two. And that one would need a separate power supply, such as a plug-in power supply with a DC terminal adapter. Do you mean just plug the tablet to a wall electrical socket, like I do now to charge it? Or did you mean do something in the Konnected panel?
Are there any issues having a central office monitor it since you are not using a old alarm system?
NATE!!! Please please please make this compatible with Smart Life/ Tuya.
Hi, I also live in Florida, Orlando area. I have a new construction. Would you be able to install this for me? Like the video, I have all wires installed. It is missing the siren and motion sensors that I need to buy. My onq box is the same.
I'd really like to give it a try but unfortunately you ship only from US and it's too complicated with taxes in Europe / Romania. Maybe in the future you’ll have some resellers in the EU?
Any plans to add ability to integrate wireless devices such as door, window, motion sensors? I'd love to use your product but out of my 8 zones, 5 are wireless. I really don't want to run more wires.
No, because there are already so many inexpensive wireless sensors on the market that work with home automation hubs like SmartThings via Z-Wave or Zigbee technology. Just replace those older wireless sensors with new ones that are compatible with your smart home platform.
Awesome man. I was wondering if you will be able to dismiss the alarm from from the tablet. And if yes does it require a password to dismiss
Konnected doesn't make the software for the tablet, it would be provided by whatever platform you choose to power your smart home with. Home Assistant has a nice virtual keypad that works to arm/disarm with a PIN code.
I think I'm going to buy one of these because it almost does exactly what I want, however I have to say you're wiring is atrocious.
Haha, I'll take that as a compliment ;) I'm an engineer, not a perfectionist!
I have a house with about 60 zones. how can I setup multiple boards with home assistant? do I connect them as separate Konnected instances?
Also what do I do If i wanna be a regional installer? Thanks
Each board communicates independently to Home Assistant, and HA acts as the controller of the system brining all the door, window, motion sensor, etc entities into one cohesive system. There are not really Konnected "instances" in Home Assistant -- each zone becomes an entity in Home Assistant that you can use for security, automation, whatever.
If you'd like to speak with us about becoming a dealer or installer, click on the "Become a Dealer" link at the bottom of our website.
Will this work with Google Home?
Did you find the mystery bonus
❤❤❤❤
How long can a series zone be because I have 33 long runs zones in my new construction home with all home runs in the basement because I’m having trouble on longer runs. Can I install a transformer and how on my pro panel
There's no defined maximum length, but it should work fine even with very long wires. Too many variables including the material of wire, wire gauge, temperature, etc. Measure the resistance on the long wire run -- it should be in the single-digit or low double-digit Ohms.
@@Konnected-io can I install an extra transformer and how do I wire it in?
@@tomangerami1506 No, you can't just put an extra transformer in. It doesn't work that way.
@@tomangerami1506 You can power your own series connected loops with a 24v transformer operating a relay. Then use the relay contacts to any alarm system. Caution: Running 33 loops in series can be a problem when one fails or worse yet goes off intermittently. At that point you will wish you had wired each loop individually so the failing zoned is called out.
Clean up the copper on your aux power ;)
Why do we need smart things, I am a little confused there. If I install the system then what is the next step to get it on my phone
You don't necessarily need SmartThings, but you do need to choose at least one smart home platform to use Konnected. SmartThings is our most popular because it's easy and free. Konnected links your sensors and sirens to a smart home platform, where you can then make home monitoring part of your suite of smart home products.
I hope there wasn’t a labor charge on the install
You need a hardwired alarm panel. The alarm needs to be able to work when internet is down.
This is a hardwired panel. It can work without internet using a local smart home platform like Home Assistant or Hubitat. Choice is yours.
How do you turn on/off the alarm if the internet is offline?
It depends if you're using a local or cloud platform for your home alarm. If it's a local platform (like Home Assistant, Hubitat, Homebridge) then you don't need internet as long as you're on the local network/WiFi. If it's a cloud platform, and your home internet is down, just turn off your WiFi to access the app via your phone's LTE/data connection.
@@Konnected-io What if your power was out and now your running on batteries, no UPS on wifi modem/router and you don't have LTE option. When power is out I assume the alarm is on, how do you turn it off, thats actually the scenario I'm wondering about. Because if I still had the a keypad from old alarm I would be able to turn the alarm off, is there a monetary switch to connect ?
I configured a UPS for the modem.
Money man
I wish there was a way to avoid their cloud. Now they has access to every time you open and window and more importantly when you leave your house. They may even have access to your pass codes or be able to disarm remotely. This model lowers the overall security of the system. This is why I’m not interested in Ring and the other cloud offerings. Is there a model that allows us to keep everything local?
Yes, you have many options to keep everything local with all of Konnected's products. Our cloud service is completely optional and only needed if you want to use it with SmartThings.
Choose Home Assistant, Hubitat, Homebridge or OpenHaB and the integration is completely local and never touches our servers. Check our website for details of all platform choices.
@@Konnected-io okay thank you
Great job! I love how simple it is but wish I could integrate Smartthings locally instead of running it through the Cloud.
Several cloud servers have been going done lately and messing up my cloud based devices. Time to mod or switch those.
That's why we also support Home Assistant, Hubitat and Homebridge. All great choices for local platforms!
I have written my own software using C#. It is integrated with the konnected pro panel and hosted locally own my NAS in Docker. It communicates with the Konnected panel by HTTP REST.
Is anyone else completely unable to add Konnected to their Home Assistant? I've never seen a more complex "add device" process in my life. It's terrible.
It should be auto-discovered in Notifications or add from the Integrations screen... then just follow the onscreen steps to configure each zone.
@@Konnected-io I agree. Yet it does not.
I wrote your support team. Looking forward to hearing back.
@@SoundStudio412 discovery in HA is managed by HA's discovery component. The device must be on your network and on the same network segment as your HA server
@@Konnected-io It is on the same network and same network segment as HA. Can your support please just write me back?
@@SoundStudio412 you can contact us for support at help@konnected.io or help.konnected.io
I think I'm going to buy one of these as it almost does exactly what I want. However I must say you're wiring is atrocious, in fact that whole cabinet looks like a hazard waiting to happen.
Well, we don't typically do installations ... just for videos like this. I'm sure you can do it better. The cool thing about DIY is that you can be as OCD as you want with the wiring!