Dear Ali, I was searching for the separation systems, then suddenly I found this nice description!! I miss you and as always I learned a lot from you! wish you all the best!
You're welcome. Length of separation will be calculated based on the formula and comparing to the required capacity of holdup+surge volume, the final length will be set by the software.
Many thanks for this informations. Please if possible to share a schematics description of all components of 2 phase & 3 phase separator (horizontal and vertical) and PID and all instrument for the function.
Thank you. I will try to prepare a comprehensive P&ID to cover almost all required mechanical/instrumentation. Any updates will be presented in the website: sites.google.com/site/sizingwizards/home
This is the best work I have seen all of 2021. Please do you have this solution for other oil production equipment e.g pumps, control valves and compressors?
Thanks for your comment. Actually I would like to do same work for other applications in the process design, but recently I do not have any plan to do it.
You're welcome. I have never investigate about liquid/liquid extractors. However I think you can use 3-phase spreadsheets and for gas phase, enter a very small value such as 0.01 kg/hr. to run the optimization. It should be work but definitely it is not optimized and the result is overdesign for your problem. (because it will considered some space for gas (~ 20% of ID)
Hi Ali, thank you for the great work. I'm getting "Solver has not been loaded.." and " Run time: 9 - script out of range" error messages. You've mentioned a manual installation in the video but I couldn't see it later. Am I missing something?
Hi, If you can not see the "Solver" in the ribbon bar, it has not been installed properly. So you can search the web for "How to install solver in Excel XY?" (Please mention the version of the excel n the search keywords) and then follow the detailed instructions on the web (and maybe youtube)
Hi, thanks for the information, i would like to know if there is something special to do for installing "Solver Add-in", cause i have already installed but when i run S-Omega 2 appear an advice that said: " Solver Add-in has not been loaded, Please refer to start up page to add it manually." I have already done the manually installation as start up page mention, but the advice still appearing. i would be thankful if you help me.
Hi, Please open a new Excel workbook (Blank one) and check the add-in window and be sure that solver is exist in the list and it's check box is marked. And also be sure that Solver is available under "Data" tab on ribbon bar. Otherwise inform me to find a solution for this bug.
Hi sir I got it,it's very helpful,God bless you I have question Could I use it to check the capacity for existing separator or it's just for sizing new one??? Many Thanks
No, it is for sizing. You can use HAT HORIZ file to check capacity: www.hatltd.com/hosted/55000702/home.nsf/396e036940cdfb7a802571280074ad47/a8d02af95cc8aae080257309002fa139/$FILE/HAT%20Horiz%20Vessel%20Vol.xls
Many thanks for this importantes informations god bless you i need a schmatics discreption of all compenent of three phase separator (horizotal and vitical) and PID and all instrument for the well fonctio
Actually for preventing any miscalculation/damage in formula, I have protect the spreadsheet. However you can see the detail of calculation by the considered button. I think there is no need to make the sheets password-free.
![Intro to 2-Phase & 3-Phase Separators [Oil & Gas Training Basics]](http://i.ytimg.com/vi/J_9b69F-Seg/mqdefault.jpg)
Dear Ali, I was searching for the separation systems, then suddenly I found this nice description!! I miss you and as always I learned a lot from you! wish you all the best!
Thanks my dear friend. I miss you too and I am so glad to hear from you. I wish all the best to you.
Thank you Mr. Ali . It is a great Work. I have just discovered today. Saludos desde México.
Thank you Mr. Alli for sharing this video
Thank you very much, Ali! You help my homework a lot! Thank you, Ali!
You're welcome.
Thank you Ali, a really helpful video and spreadsheet! I want to ask how to enter the length of the separation
You're welcome. Length of separation will be calculated based on the formula and comparing to the required capacity of holdup+surge volume, the final length will be set by the software.
Many thanks for this informations.
Please if possible to share a schematics description of all components of 2 phase & 3 phase separator (horizontal and vertical) and PID and all instrument for the function.
Thank you. I will try to prepare a comprehensive P&ID to cover almost all required mechanical/instrumentation.
Any updates will be presented in the website: sites.google.com/site/sizingwizards/home
This is the best work I have seen all of 2021. Please do you have this solution for other oil production equipment e.g pumps, control valves and compressors?
Thanks for your comment.
Actually I would like to do same work for other applications in the process design, but recently I do not have any plan to do it.
Nicely done ! Thanks a million. 🙏
nice work
this is gold
really nice, Sir!
Thanks Ali for this shared knowledge
My pleasure
Thank you Ali, really helpfull video and spreadsheet! BTW is it possible to use it to design a liquid liquid (ex water/HC) two phase separator?
You're welcome.
I have never investigate about liquid/liquid extractors. However I think you can use 3-phase spreadsheets and for gas phase, enter a very small value such as 0.01 kg/hr. to run the optimization. It should be work but definitely it is not optimized and the result is overdesign for your problem. (because it will considered some space for gas (~ 20% of ID)
Thanks Mr. Ali, this is a useful tool.
You're welcome.Thanks
hi Ali , could you upload your document again, I need to download it urgently please
Hi. I fixed the download links. Now you can download them on the website:
sites.google.com/site/sizingwizards/download
Hi Ali, thank you for the great work. I'm getting "Solver has not been loaded.." and " Run time: 9 - script out of range" error messages. You've mentioned a manual installation in the video but I couldn't see it later. Am I missing something?
Hi,
If you can not see the "Solver" in the ribbon bar, it has not been installed properly. So you can search the web for "How to install solver in Excel XY?" (Please mention the version of the excel n the search keywords) and then follow the detailed instructions on the web (and maybe youtube)
Thanks for sharing sir
very very very nice sharing knowledge, jazzakumullah yakhair,....
It's my pleasure
Hi, thanks for the information, i would like to know if there is something special to do for installing "Solver Add-in", cause i have already installed but when i run S-Omega 2 appear an advice that said: " Solver Add-in has not been loaded, Please refer to start up page to add it manually." I have already done the manually installation as start up page mention, but the advice still appearing. i would be thankful if you help me.
Hi, Please open a new Excel workbook (Blank one) and check the add-in window and be sure that solver is exist in the list and it's check box is marked. And also be sure that Solver is available under "Data" tab on ribbon bar. Otherwise inform me to find a solution for this bug.
thank you so much, this is very helpful..
Anyone did 3 phase vertical detailed sizing?
Hi Ali, i tried to download the package and after downlod i dont see any file..
Hi.
Try this link:
www.google.com/url?q=http%3A%2F%2Fbit.ly%2FSeparatorV2__1&sa=D&sntz=1&usg=AFQjCNG6jjWre0urB9TBCvacJK9pgSUK2g
Hi sir
I got it,it's very helpful,God bless you
I have question
Could I use it to check the capacity for existing separator or it's just for sizing new one???
Many Thanks
No, it is for sizing. You can use HAT HORIZ file to check capacity:
www.hatltd.com/hosted/55000702/home.nsf/396e036940cdfb7a802571280074ad47/a8d02af95cc8aae080257309002fa139/$FILE/HAT%20Horiz%20Vessel%20Vol.xls
th-cam.com/video/2A9i9aDTBMA/w-d-xo.html
Many thanks for this importantes informations god bless you
i need a schmatics discreption of all compenent of three phase separator (horizotal and vitical) and PID and all instrument for the well fonctio
I sent you via email.
Brao, i was looking for this kind of video, thanks a lot. If you produce videos on mechanical design using ASME codes it will be wonderful
You're welcome. I am process engineer and I know about process design. I am afraid to say I don't have information about mechanical design.
@@alifarrokhzad2725 thats good bro everything is knowledge
Hi, I cannot download the package.. could you fix it?
Please download it via this link:
sites.google.com/site/sizingwizard/Sizing%20Wizard%20v2.1%20_%20R20201018.rar?attredirects=0&d=1
well done!!
Thanks
Dear Ali, I cannot download the software from your website please check it out and help me
Hi. Please let me know what's the wrong?
send email to me if you need it as attachment
Is it possible to download the excel sheet?
Yes, refer to the website or click below link:
bit.ly/SeparatorV2
Many thanks for amazing program , If that possible to make on program to calculate water
treatment unit like dehydrator and desalter
thanks
Thanks for your feedback. I will appropriate if you introduce me good references for these propose.
thanks allot for you reply ,I think you can use the book "surface production facilities second edition" it is useful in this field.
Thank you so much. I will plan to do as soon as possible.
I will stay looking for it.
salam , aghay amir mishe ye email chizi behem bedin ? ye project daram azaton komak mikham age beshe
سلام. ایمیل من:
ali.farrokhzad+sw2@gmail.com
sizing.wizard@gmail.com
is it asking to anyone for a password?
Actually for preventing any miscalculation/damage in formula, I have protect the spreadsheet. However you can see the detail of calculation by the considered button. I think there is no need to make the sheets password-free.
hallo can you send me the excel by mail please ?
Please download it via this link:
sites.google.com/site/sizingwizard/Sizing%20Wizard%20v2.1%20_%20R20201018.rar?attredirects=0&d=1
hi ali ,
I have a task related to this subject can you help me out ? and provide me with your email ?
Hi. Please check website to find email.
sites.google.com/site/sizingwizards/contact-Us
Thanks Mr. Ali, this is a useful tool.
You are welcome