Multiple XRD spectra in a single graph - 30

In this video, I have shown how to plot multiple XRD spectra in a single graph using OriginLab software. If you have any questions, ask them in the comment section below. For more videos, please subscribe to NanoWorld. Thank you.
#NanoWorld
_______________________________________
For more updates follow us on,
Facebook: / fascinatingnanoworld
Twitter: / nanoworld8
Instagram: / nanoworld85
Contact: [e-mail]
_______________________________________
Please check it out, here is a list of my more useful videos.
Interpretation of SAED pattern | estimation of d-spacing & (khl) values
• Interpretation of SAED...
How to put a scale bar on SEM & TEM images (SEM/TEM data analysis)
• How to put a scale bar...
No valid atomic position available (Rietveld refinement through X’pert Highscore)
• Fixing of valid atomic...
Negative intensities in scan data points (Rietveld refinement through X’pert Highscore)
• Fixing of Negative int...
Indexing XRD peaks with Miller indices (hkl) values using X’pert Highscore software
• Indexing XRD peaks wit...
How to plot JCPDS card with the XRD data using OriginLab software
• How to plot JCPDS card...
XRD data analysis using X’pert Highscore software
• XRD data analysis usin...
Deconvolution of photoluminescence PL spectra (PL peaks fitting)
• Deconvolution of photo...
How to find peak position and FWHM of XRD data
• How to find peak posit...
How to calculate crystallites (grain) size from XRD data?
• Crystallites (grain) s...
Estimation of grain size through modifies Scherrer equation
• Grain (crystallites) s...
Crystallites size and strain using W-H plot method
• crystallites (grain) s...
Calculation of nanoparticle size through SEM image
• nanoparticles size fro...
How to find Miller indices of XRD peaks?
• How to label XRD peaks...
How to calculate d-spacing from XRD data?
• How to calculate d-spa...
How to calculate lattice constant (a, b, c) values from the XRD data?
• How to calculate latti...
How to calculate microstrain and dislocation density from XRD data?
• strain and dislocation...
How to calculate crystallinity from XRD data?
• how to calculate cryst...
How to smooth XRD data?
• How to smooth data (XR...
Baseline correction for XRD data
• Baseline correction fo...
Cyclic Voltammetry Data Analysis
• CV Data Analysis throu...
How to find bandgap energy using the Tauc plot method?
• Video
How to calculate bandgap energy using the Kubelka Munk function?
• Bandgap energy using K...
Understanding Tauc plot, 1240 (constant) and 2.303 constant
• Band gap energy (Tauc ...
How to know a material either have direct or indirect bandgap energy?
• How to know a material...
DSC Data Analysis
• DSC Analysis Through O...
TGA Data Analysis
• TGA Analysis Through O...
How to plot the double Y-axis in a single graph?
• TGA & DSC double plot ...
Electron paramagnetic resonance (EPR) data analysis (calculation of g-factor)
• Electron paramagnetic ...

[@georgiagiannadaki2217]

Thank you so much for your video really appreciated! You will not believe how I was doing this graph all this time.. I was adding in each column +20 +40 +60 to separate them! And I was thinking there must be another way!!😂 Very informative thank you!!

[@neekitashah9209]

hello sir, thank you once again sir for sending jcpds card data. sir pls can you do some lecture or make some video about crystal structure refinement of doped and undoped materials

[@hanihadjoudja8560]

thank you friend ❤

[@satvam9891]

good and informative video

[@harry-ho9ti]

Sir pls do a lecture on how to fit P-E loop of a ferrolelectric sample.

[@psd309]

Hello sir, videos are very informative and easy to understand.can u pls. make a video on interpretation of TGA-DTA graph.it will be very helpful for us.Thanku

[@kavitayadav8351]

Sir, plz make a vedio that how to analyse the Raman spectra, of new material

[@harry-ho9ti]

Sir pls do a lecture on how to fit P-E loop of a ferrolelectric sample. Pls reply sir.

[@ahmadaziz5263]

Hi, thank you for this interesting video, i would like to ask you, how to plot a multiple stress-strain curve with offset x axis? mean, we have a few stress-strain curves in x axis with different starting point, not all starting at the origin 0. thanks.

[@loveonly786]

I have three stacks and When I click on independent, apply, then the two scatter lines disappear and only one curve can be seen. Please what should I do so that it not disappear and I can make changes. Thanks

[@walirahman6663]

i am complete beginner and i have data in Excell format plz what are the steps necessory for plotting
i want to plot xrd, PE loop, d33 and dielectric constant of a ferro electric material
a complete video if you can . i shall be thankfull

[@NadeemAbbas-ig2vu]

How can adjust the same distance along y-axis of different peaks?

[@periyasamysams7145]

How to find d spacing for single crystal electron diffraction using image j software?

[@NadeemAbbas-ig2vu]

How we can adjust the intensity of multiple sample at any specific angle. Like I want to make intensity of my different sample at angle 23.

[@oorugondaraju9633]

How to smooth stack plot xrd in origin sir

[@nusaibanazrul9885]

Can I change the sizes of the texts M1,M2...?

[@abroozainab8448]

what to do if X axis is different?

[@sheesh7827]

what if the degree values were different?

[@Lamophiles]

my overlay graphs are not coming to be equal in length

[@juancamiloacevedopaez9208]

Thanks for the video. Do you have the new version of OriginPro (2018)? Could you share it, pl...

[@Aneelahassan1027]

Asslam o alikum sir your videos are informative.. Can you plz make video how to interpret data of DLS, UV-Visible, and PL spectra?

[@deitybasumatary7497]

How to remove y axis's numbers??

[@Riad-x1g]

Thank you

[@m.aakashm.aakash7656]

X axis ka data to ap ne select kia hi ni

[@kacermalik]

I got data in xrd graph one for pure bismuth n then Sm doping with different conc. Can I convert each graph to excell

[@nanoworld6122]

if the graphs are in JPG or PNG etc. format, then you can not convert it.

[@nidhisingh-rv1up]

The way of presentation is good sir but sorry to interrupt you, you might be correct but as of my knowledge this is not the right way of XRD data interpretation

[@ZafarAli-pm4dz]

Great

[@maheswaripalanivel9031]

Two sample X value is same...another one sample X value is different.how to plot this???

[@m.mahimakumar6112]

Paste all the tables including X and Y columns. Select all and right click, then you can set as XYXY. Now u can plot it even X axis values are different.

[@maheswaripalanivel9031]

@@m.mahimakumar6112Thank you

[@harry-ho9ti]

Sir please make a vdo on Raman spectroscopy fitting. From Raman how to calculate mode frequency and line width.

[@walirahman6663]

@@m.mahimakumar6112 pls tell me the steps required to plot data from Excell to origin xrd, pe loop, etc

[@kavitayadav8351]

Plzzz

[@Akash-ot3ih]

😊😊😊😊tlllllllll😊🔥😂😎❤️😘

[@NadeemAbbas-ig2vu]

How can adjust the same distance along y-axis of different peaks?