I gotta be honest Rob mate I only watch these fender jobs outta loyalty to the channel and that I think your a top geezer coz I will never get the chance to have one of these guns in my hand the closest I come to clearcoating is a rattle can on my balcony but I'm sure there are plenty of subscribers that get a lot outta these vids so I'll say nice one mate and keep up the good work
didn't take long to get you on the day release program rob? nice video again rob, your videos are saving people time and money. can't fault ya pal 👍👍👍🍻
Yes mate day release got sorted quick 👍 but back there now 😜 glad you liked the video and thank you for all the support with the Channel much appreciated 🙏
That looks a nice gun Rob and as you say it laid the clear on really nice, I think you know Pete's Hobbies he has loads of guns and has done a side by side comparison of the FLG5 and the F160 and said the same as you that the F160 is a better all round gun, I'm temped to get one for primer plus a 1.3 tip for base and clear. I would have thought that the guards from Chapel House would have locked you in there and would be posted outside, I was surprised that one wasn't in there with you in case you tried to harm yourself but you seemed to cope quite well with it being a big indoor space🤔😂🤣
Great video Rob and great gun! Quick question, I will be painting a VW T2 van and I already purchased the FLG5 1.3, do you believe it is worth getting the ANI F160 instead for my project? I have the basics of painting but I’m not a professional. I only have one opportunity to do the best job I can and I am willing to get another gun if needed.
Assuming you have an additional reg to set the pressure, check you have the air lever is fully open back of the gun above the fluid knob Anti-clockwise for full. Has caught me out before.
I bought this gun about a year ago and have been pretty impressed! Fantastic gun for the money. Good build. I keep it cleaned out. It's a keeper👍
Hi bear totally agree 👍 great gun massive fan patern and for the price you cannot go wrong thanks for the feedback much appreciated
“Thank you” You’re the only one that explain how the fan Pattern works , thank you , you answered my questions , awesome
Glad you liked the video and got the information you where after
Great job and Great painter my friend!!!
Cracking fan mukka good atomisation all in all a nice gun I'm impressed pleased for ya mate 👏👏
Great gun mukka another one for the studio wall I am running out of room 🤪
@@dredfxcustompaint build an extension mate problem solved 🤣🤣
I have the same gun and I really like it too.
Nice one 👍 I really like it for the price you cannot go wrong 😉
Amazing. Thanks for the review. It really helped me.
Your welcome thanks for watching and the feedback much appreciated
Mate you look well chilled today looks like the whale song music and prozacs done the trick
😛
Thank you 🙏
I gotta be honest Rob mate I only watch these fender jobs outta loyalty to the channel and that I think your a top geezer coz I will never get the chance to have one of these guns in my hand the closest I come to clearcoating is a rattle can on my balcony but I'm sure there are plenty of subscribers that get a lot outta these vids so I'll say nice one mate and keep up the good work
Thanks mate 👍 next week is a random one for videos something different
didn't take long to get you on the day release program rob?
nice video again rob, your videos are saving people time and money.
can't fault ya pal 👍👍👍🍻
Yes mate day release got sorted quick 👍 but back there now 😜 glad you liked the video and thank you for all the support with the
Channel much appreciated 🙏
I have a ANI 160, Chose it over the FLG as you can get a second needle and cap for only £50. Run a 1.3 & 1.7
1.7 for primer?
Great video 📹 Rob just subscribed to your channel i brought the Ani 160Q ages haven't used it yet
Welcome to the channel 😀
That looks a nice gun Rob and as you say it laid the clear on really nice, I think you know Pete's Hobbies he has loads of guns and has done a side by side comparison of the FLG5 and the F160 and said the same as you that the F160 is a better all round gun, I'm temped to get one for primer plus a 1.3 tip for base and clear.
I would have thought that the guards from Chapel House would have locked you in there and would be posted outside, I was surprised that one wasn't in there with you in case you tried to harm yourself but you seemed to cope quite well with it being a big indoor space🤔😂🤣
Hi john love the f160 mate its a beast of a gun going to use it in the booth next week
Great sharing!
Great video Rob and great gun!
Quick question, I will be painting a VW T2 van and I already purchased the FLG5 1.3, do you believe it is worth getting the ANI F160 instead for my project? I have the basics of painting but I’m not a professional. I only have one opportunity to do the best job I can and I am willing to get another gun if needed.
Hi Peter the flg5 will be fi e mate 👍
Excellent video, how did you set the gun to clear? it would be nice to have a starting point for the setting.
Hi start off with setting your pressure to 2bar then your fluid to two and a half turns out with full fan give that a test hope this helps
Nice video what nozzle tip are you using for clearcoat?
Hi its a 1.3mm on the ani
@@dredfxcustompaint thank you and such great content keep it up!
What do those parts go to. I see you alwYs spray blue and similar parts
These parts are new Holland tractors 🚜
Mr c it's an ANI gun made in Italy bro
What needle/nozzle size were you using?
Hi its a 1.3mm set up
I've got this gun. When I spray clear, I cannot get the fan as wide as that? Don't know what I'm doing wrong? Any advice much appreciated 🙏
What tip size do you have ? This one is a 1.3mm set up full fan running 2.5 bar
Assuming you have an additional reg to set the pressure, check you have the air lever is fully open back of the gun above the fluid knob Anti-clockwise for full. Has caught me out before.
ROB whats the settings on the gun 🔫 mate fluid and air and fan 🤔
Hi Andrew 2bar pressure full fan then come in one turn and 2 and a half turns out on fluid for second coat first coat was 2 turns out
@@dredfxcustompaint Rob is the finsh same as base coat paint and the settings the same i got my from spray guns direct
@@ANDY-we7mr if your using the ani for base fluid you can adjust to suit but pressure would come down
@@dredfxcustompaintHey Boss what is the little lever above the amount fluid adjuster knob?
@@ISF_Foo hi that is for air pressure on and off
Hi, can i ask you your temperature in the booth ?
Hi the booth is normally running around 24 degrees when we spray hope this helps 👍
Where can I get this 🔫
Link in the description
DEAN ARE YOU WATCHING ...ROBBIE IS DONATING THIS ONE TO YOU ..SO YOU CAN GET SOME TRAINING MATE..SINCE ALL OF THIS IS NEW TO YOU
🤣🤣🤣🤣 thanks mate could do with some training but fender painting puts you in the crazy house just look what it's done to dredio
@@deanbrown7643 😂🤣😅
That one looks like the lowest grade of the sagola family
It's a good gun Jc surprised me mate on how good it sprayed
@@dredfxcustompaint yes Mukka I can see it. Iove the review!!
Dear Sir,
Why do you consistently FAIL TO MENTION, the psi & CFM required for each gun? You must know these are VITAL specs, surely!🥺🥺🥺