Using a center punch to malform the bolts into and over the top of the nuts as well as tough loctite would help slow them down. I would assume only a spiteful neighbour in the night would try to quickly remove it and would probably give up quickly if it were hard
As long as the customer was happy! Surely the padlock came with more than one key? And I certainly hope you were joking when you said it's 'not pickable'!!
Yes, its pickable , but not as easy as a pin lock, its some kind of Abloy copy, I will pull it apart in the next video, Its pickable if you have a tool to suit
Dr Lock You are quite right that these are abloy copies, but unfortunately nowhere near the tolerances or quality, the disc housing in these is plastic so the core can be forced, and none of the discs have false gates. It is possible to pick up a cheap disc detainer pick to overcome these locks, and as ‘Fanta’ mentioned the plugs can be popped out as they are only press fitted, still would be interested in a tear down video! Take care!
Its not worth picking on the job, because most of us don't have the tool handy, and its quicker to just cut and replace. I spoke wrong " But yes its pickable, see this video I did the next day using some ruff pick I had on hand th-cam.com/video/RUw3cvjbS8E/w-d-xo.html
The post doesn't cover the bolts when you put it on, so anyone can come along and remove the bolts.
This is true
Using a center punch to malform the bolts into and over the top of the nuts as well as tough loctite would help slow them down. I would assume only a spiteful neighbour in the night would try to quickly remove it and would probably give up quickly if it were hard
As long as the customer was happy! Surely the padlock came with more than one key? And I certainly hope you were joking when you said it's 'not pickable'!!
Yes, its pickable , but not as easy as a pin lock, its some kind of Abloy copy, I will pull it apart in the next video, Its pickable if you have a tool to suit
The plugs on these are press fitted, I believe with the right size screwdriver the whole guts will pop right out...
Dr Lock You are quite right that these are abloy copies, but unfortunately nowhere near the tolerances or quality, the disc housing in these is plastic so the core can be forced, and none of the discs have false gates. It is possible to pick up a cheap disc detainer pick to overcome these locks, and as ‘Fanta’ mentioned the plugs can be popped out as they are only press fitted, still would be interested in a tear down video! Take care!
Move the leaves and debris before you start marking out cheers good video
Good point
“It’s not pickable” send it to lockpickinglawyer
Its not worth picking on the job, because most of us don't have the tool handy, and its quicker to just cut and replace. I spoke wrong " But yes its pickable, see this video I did the next day using some ruff pick I had on hand th-cam.com/video/RUw3cvjbS8E/w-d-xo.html
Nice work
I hope you have them a better padlock than the one that came in the kit 😲
Cheap or expensive really doesn’t matter. Bolt cutters or a cordless grinder will remove any padlock in less than a minute
Except that one only needs a screwdriver.....
I did put a normal padlock on after, I kept the original padlock and will pull it apart on the next video
Ideals 👍 Stay safe buddy 🤘
That's a deterrent , definitely not a solution!