God bless these guys for creating a website, channel, and content just for 4Runners. Really makes everything so easy to shop for since it’s a one stop shop for everything for 4Runners only. Just ordered these and can’t wait to wire them up.
Do not use a flat-head screwdriver to remove the plastic clips. All you need to do is push the center of them down. Once you take them out you can reset them and put them back.
Christopher O'Connor You’re EXACTLY right. I tried editing the video later because I forgot to mention that and now I can’t figure it out. Thanks for clarifying.
@@4runnerlifestyle No worries. Just wanted to make sure anyone else who watched save themselves from potentially breaking some clips. Good video, and good looking rig.
Yep. Broke the first one and then realized how simple it was with the second one and the rest lol. Made it so complicated when it was in fact super easy.
How do you reset them? Probably a dumb question but I thought I was resetting it but just twirls and is loose when I put it back in. Compared to what it was before of not moving at all.
Easy install. Why not make the wiring harness long for the furthest light and short for each subsequent light, as you get closer to the drivers side? Less wire mess by the radiator.
Bro same , I was so close to picking up a grand Cherokee but torn with the mixed reviews. Now I’m determined to save a little bit more for a 2015 sr5 4Runner with 4x4. It’s an investment towards a very reliable and sweet looking vehicle
Can you remake this video for the 20-21 Trd pros? The black wire in the kit I received has a gold connector on the end/ is not the same as the video. Instructions are lacking
Can you guys update video or instructions (didn't get any of those in my box) for a 2022 TRD Pro? I found another video that wired it to the fuse box under the hood but the add-a-fuse connector sits almost an inch proud of the fuse itself and fuse box cover will not fit back on. The other video I found was for a 2020 and I guess the 2022 has a more 'fitted' fuse box cover
Can you share the video you are referencing in your post? I have a 2022 TRD 4Runner. I installed then on the tail light fuse, lights new raptor lights came on but I loose my tail light and parking lights. I don’t know how to make all lights ( raptor lights, parking lights, tail lights) work together. Any ideas?
I believe it's more feng shui to plug the Double Fuse Tap into the "tail light" fuse slot. This way the raptor lights will automatically sync with the exterior lights rather than the ignition switch.
On my 2020 trd off road. I connected to the 10a marked as tail to the left of the 7.5a DCM. Should be left column. Closest to you/the top. It runs off the switch. When you are in lights on or the setting right below.
So I put it in the INJ fuse in the engine bay and my 4runner would not start. I had to go back to the original 10A red fuse and it worked again. So not sure what to do
It sounds like you don't have a fuse or a blown fuse in the harness thats in the kit possibly. We can figure that out for you and get it taken care of if so! Sales@4runnerlifestyle.com by email will get you connected with our guy Andrew and we can open a case to see what the issue is!
Why does my setup have a fuse on the line? I bought the lower 4 raptor light and the cable came with a fuse connected to it. Plus two fuses for the fuse box… can you please tell me how to set this up? Do I cut out that 15amp fuse out of the main power cable? Or use two 10 amp fuses with the 15amp inline fuse.
Hey max! that is not fun! have you emailed our customer support? if you ordered them with us we can help you get them installed or replace them if they aren't working!
Do not use a screwdriver to remove the plastic clips as explained in the video, just push down the button on the center of the clips and pull them up! For 2020/2021 4Runners plug into the INJ fuse in the engine bay.
i had the low profile fuse they give me the mini fuse tap I can’t put my fuse into a fuse tap so do i have to get the mini fuse to replace the fuse that i had?
@@dlumlung use a dremel tool to create a slot for the wire in the lip of the fuse box. Then match the slot on the cover. Protect wire from chafe with some electrical tape or preferably cloth automotive tape. They should advise using a grommet in the firewall hole also. Grounded sparky wires no bueno.
FYI there is a fuse puller in the engine bay fuse box that will pull out the 4th left fuse (my fuse box had no empty spaces and no fuse puller I tried worked beside the one that came with the truck)
I enjoyed the video and the installation but one hick up I had is the length of the wiring. The wire I received was not long enough to go through the firewall so I needed to make alternate connections. I went ahead and connected the power wire directly into the fuse box, in the INJ slot and it works just the same. Works just the same, easier and faster.
I have a 2023 40th Anniversary Edition. The fuse box is different than the one in the video, and he doesn't say what the fuse location is labeled. Please help! I would like my lights to work.
@RetJetFxr I understand that. Read my original message. The guy in the video says "plug it in right here." Then he pauses the video and draws a red circle around the spot that he wants you to plug it into. He never states what that fuse spot is labeled. My fuse box is different from the one in the video. I need to know what that fuse location is labeled so I can find it on my fuse diagram...
@@benmorrison6511 I understand. I actually installed these in both my new 4Runner and new Tacoma. In the 4Runner I had to plug the add-a-fuse into one of the two low beam headlight fuses (under the hood), and the tacoma I got a little creative due to the grill style, but I used the INJ fuse so the lights would come on at engine start. In the 4Runner, the INJ fuse sits too high to where there's no room to plug in the add-a-fuse and put the lid back on. In both cases, I still had to cut a notch into the fuse box lid so I wouldn't pinch the wire.
Why do you bypass the fuse box under the hood and use the one in the cab? I seen videos of it done both ways. Is there an advantage to one over the other?
I tried both options for my 18 sr5. Under the hood works for me but after a week my battery died. With this option my lights stayed on every time the truck is on. I’ve tried connected inside the vehicle under steering column as shown in video but does not work for me.....not sure why.
Inside the cab. The first 10amp will say tail lights. If you use that one. Then you have some control . They wont turn on unless you select your front amber side marker lights. This way if you wanted to . You can run with them off or on with your front side markers. Basically working like a switch
@@jeremylusher1316 what fuse spot did you use? my 2021 under dash fuse box doesn’t look like the one in this video. I only have one empty fuse spot and when I plug it in there, the lights stay on no matter what.
While wiring the raptor lights on newer 4runners use "tails postion" the raptor with work with parking lights head light high beams but not drls not abig issue
the lower black bumper isnt a part we sell but there are a wide range of them available out there or if youre ok with removing it some people will remove it and have it wrapped or coated black.
Im wondering the same thing. My headlights' DRL fuse tap seems to be the only fuse that I can plug into that actually turns the lights on and off with the car. The other fuse locations just keep the raptor lights on even when the 4Runner is off. I can do what he did in the video but then my fuse box's cover wont be able to go back on with that big fuse tap coming out of it. Lol talk about rough day
Yes, that can happen, we are going to an open position or at least one that doesnt already have an add a fuse. A way to fix this issue is with a control panel like an SPOD or an Auxbeam. They help organize all the wiring and make it more streamlined when adding so many lights www.4runnerlifestyle.com/products/auxbeam-8-gang-led-switch-panel-kit-one-sided?_pos=4&_sid=cf76e6711&_ss=r
So I didn’t go through the firewall, instead went directly into the fuse box under the hood. I’ve found two configurations. One will turn the raptor lights on only when the headlights are on. The second configuration will turn the raptor lights on whenever the engine starts. Looks like the configuration in this video turns them on with the headlights too… I think I like having them on without the headlights as an option- just thought I’d throw out that thought if anyone is interested
!!!This is very important and should be checked in your state prior to purchase!!! It is illegal to have the off road raptor lights turned on while driving on state roads especially with the LED white modifications. I just got pulled over in PA(worst state ever) and he said they must be turned off when you're driving on the road unless they're manufacturer installed.
I live in PA (outside of Philly) and never knew this. Do you have an actual reference from the PA DOT or DMV? I have amber raptor lights in both my 4Runner and Tacoma grills.
I have not. There is a guy on you tube with his white 2020 Pro with raptor lights. He has not posted the video yet how to hook them up. His name is Chris.
I just bought a 2020 4runner but the front grid where this lights fits is not the same as the shown in the video. Is there other models for different grids??
Would be nice if they updated the instructions for newer 4Runners. The harness they provided doesn’t just fit into the INJ slot like the updated “instructions” do below.
@4Runner Lifestyle Happy to bring my 2021 to use in an updated video. I have purchased the lights but can’t get them to work correctly. The tail location did not work for me.
Ordered these Friday via the website, however have not received anything confirming my purchase has been received. Emailed and texted per the website, no response. My card has definitely been charged. Little concerned..
Side B Productions LLC Awesome thanks for the reply! I had just ordered from them last night and then read your comment so I was worried haha. Couldn’t find anything about them online either so I assumed they were fairly new.
You should do an install video on the 3 light kit, as the wire provided is not long enough to get through the fire wall and you have to use the fuse box in the engine bay. I had to follow instructions on the R4T install and shorted something because my 4Runner wouldn’t come out of park and my ABS, battery and traction control lights all came on. All the fuses I checked seemed ok and driving home everything freaked out and shut off. Currently waiting on a tow truck. No fun.
Yo that happened to me too when I originally installed in the under the hood fuse box. It just completely shut off and brakes didn’t work or anything on the highway. Luckily it wasn’t rush hour and I had to push the brake hard as I can to slow down a little till I rolled to a stop. I had it towed to the dealership and they said it was the fuse that was put in was not good on these aftermarket parts. I bought the 4 lights and wired it in the cabin drivers side fuse box and I’ve had no problems since in the cabin you use a slot that didn’t have an existing fuse already. Other instal videos said take the inj fuse and put it into the add a fuse they provide under the hood which is what made things mess up.
It depends on the Toyota emblem that you have on your front grill. Some have the letters like the one in the video, others have the round Toyota emblem in the middle of the grill.
Without a rubber grommet in the hole through the medal you have a potential disastrous fire with wire rubbing on medal. Especially if you drive a lot of rough roads. Not just speculation, I know one that was totaled, wired without that rubber. If you put one in sorry, I didn't see it.
I have the 2021 4Runner TRD Off-Road Premium w/ KDSS. There are only 3 open circuit breaker slots open and only one of them fits the wire that comes from 4Runner Lifestyle. That specific breaker opening works but does not power down when I turn off my accessories, turn off lights, lock my doors, etc ... The Raptor Lights stay on. Any guidance or support would be greatly appreciated.
We so sell carbon fiber hoods that have the scoop as well www.4runnerlifestyle.com/products/seibon-4runner-carbon-fiber-tr-style-hood-2010-2021?_pos=4&_sid=e22d38b71&_ss=r
But why would you put FORD style 'Raptor' lights on a Toyota? You do know that the Raptor was required to have those due to the width of the vehicle, right? Right? I will say, those lights are very well built in their fitment.
I saw some install videos where the wiring was connected to the fuse box located in the engine bay. Is there a difference between installing in the engine bay and installing in the driver side fusebox?
Install appeared to go smoothly, but lights will not turn on. Tried different fuse locations in the cabin, re-checked connections, but nothing. Awaiting return communication from 4Runner Lifestyle.
No you don’t. You can pull the fuse labeled “IGN” in the panel under dashboard and use the add a fuse in that spot with the 10amp fuse you pulled out and a 15amp fuse for the lights and you are good to go. Could probably work in the spot labeled “IGN NO.2” as well.
@@ryanlieder7459 thank you for this I was struggling to get them to turn off when the car was off but this definitely worked without having to use the fuse box under the hood.
@@ryanlieder7459 Just want to say thank you my man. I just installed these into my 2021 trd pro based off this comment. Ryan does not lie works in either.
@@ryanlieder7459 bro THANK YOU SO MUCH. I was about to just give up because my 2021 ORP fuse box under the steering wheel is NOT the same as this video. And if you put it in the only available slot the lights stay on all the time. So thank you so much for this tip!!! Also, do you lose anything by taking out the old fuse and putting in this one?
vince j , I connected the fuse to the relay and fuse box in the engine bay with black ground wire connected to a bolt holding battery and it works. (Battery died after a week, not sure why). Tried connected to inside fuse box under steering Column as shown in video with the black ground wire and did not work....
@@honestgal9098 if you try to remove the light to see if your battery die again. IF DIE without the light then some thing else causing the drain not the light itself or vice versa
Do these clip-in style lights work (clip-in) on the OEM upgrade grill? I have a 2017 SR5 and want to upgrade my grill ty o have the lights but i don't want to spend $600 for a grill upgrade to then find out that these lights won't fit. Anyone know?
I didn't like where the harness was installed. Instead I installed it on the fog light circuit so that they lights would turn on and off with the fog light switch, controlled by the fog light relay and protected by the Fog FR fuse.
does the black wire is the ground or negative? trying to figure this with a switch and a relay. Are there any videos with the same lights installed it with a switch and a relay?
what i've done in the past on other vehicles is i remove the grommet and drill a small hole through (slightly smaller then the wire diameter to make it a tight fit), then pass the wire through the grommet and leave the grommet sitting in the middle of the wire. then when the wire is done being fished through the firewall i simply slide the grommet back into position and pop it back in. easy way to seal it back up.
Ya you don’t need a flat head screw driver to pry off those plastic pieces in the beginning. It’s just a button you need to push. I broke 2 of em trying to pry them out with a flat head like you said
Bought these for my 2021 4Runner SR5 Premium and they don’t snap into place on the grill. The body of the 2020 and the 2021 didn’t change. Disappointed.
They fit perfectly into mine. I know it seems silly, but try flipping the lights upside down from the way you had it initially. They're identical, I know, but this worked for me.
God bless these guys for creating a website, channel, and content just for 4Runners. Really makes everything so easy to shop for since it’s a one stop shop for everything for 4Runners only. Just ordered these and can’t wait to wire them up.
Well that sucks, but I’m glad it wasn’t only me. My mechanic took care of it but it shouldn’t have happens in the first place.
I wish all tutorial videos were as clear and comprehensive as this one. Phenomenal job.
Do not use a flat-head screwdriver to remove the plastic clips. All you need to do is push the center of them down. Once you take them out you can reset them and put them back.
Christopher O'Connor You’re EXACTLY right. I tried editing the video later because I forgot to mention that and now I can’t figure it out. Thanks for clarifying.
@@4runnerlifestyle No worries. Just wanted to make sure anyone else who watched save themselves from potentially breaking some clips. Good video, and good looking rig.
Just ordered the lights and watched the video. Thanks a ton for the tip!
Yep. Broke the first one and then realized how simple it was with the second one and the rest lol. Made it so complicated when it was in fact super easy.
How do you reset them? Probably a dumb question but I thought I was resetting it but just twirls and is loose when I put it back in. Compared to what it was before of not moving at all.
Why is mine amber light stay on?
Installed mine this morning. Real easy mod that really improves the looks of the rig
hi, Jeremy, we are looking for someone to test our products: 4runner red grill lights, it's free, are you interest?
Cheng Tina I’ll test them
Pretty cool!!!. I bought my first 4runner yesterday and will be watching your videos to learn about mods and fixes. Happy thanksgiving.
Holy crap this tutorial was tough to watch 🤣 I lost it with the damn ground wire laying over the e brake
Easy install. Why not make the wiring harness long for the furthest light and short for each subsequent light, as you get closer to the drivers side? Less wire mess by the radiator.
Also could ground at the body near the battery then just run the positive inside. One less wire to deal with inside
That's what I'm saying
Now I am even more pumped to get a 4runner
Bro same , I was so close to picking up a grand Cherokee but torn with the mixed reviews. Now I’m determined to save a little bit more for a 2015 sr5 4Runner with 4x4. It’s an investment towards a very reliable and sweet looking vehicle
@@santiago_6280 I’m loving it so far 👍🏼
Can you remake this video for the 20-21 Trd pros? The black wire in the kit I received has a gold connector on the end/ is not the same as the video. Instructions are lacking
Can you guys update video or instructions (didn't get any of those in my box) for a 2022 TRD Pro? I found another video that wired it to the fuse box under the hood but the add-a-fuse connector sits almost an inch proud of the fuse itself and fuse box cover will not fit back on. The other video I found was for a 2020 and I guess the 2022 has a more 'fitted' fuse box cover
Can you share the video you are referencing in your post? I have a 2022 TRD 4Runner. I installed then on the tail light fuse, lights new raptor lights came on but I loose my tail light and parking lights. I don’t know how to make all lights ( raptor lights, parking lights, tail lights) work together. Any ideas?
What about the fuse cover? I'm assuming you cannot close it. It will be exposed to dust and dirt
I believe it's more feng shui to plug the Double Fuse Tap into the "tail light" fuse slot. This way the raptor lights will automatically sync with the exterior lights rather than the ignition switch.
Where is the tail light fuse slot/ what is it called
@@bswen600 It's called "Tail" located bottom left in the panel under the drivers dash next to the ebrake
Does the taillight come on During the Day to make the raptor lights turn on ??? Or does it need to be turned on with Lower beam light?
@First Last they'll stay off during the day, therefore, the first setting that will turn them on will be the yellow parking lights
@@byronpitulski766 great to know. Does the fuse box under the hood have a tail fuse ?
On my 2020 trd off road. I connected to the 10a marked as tail to the left of the 7.5a DCM. Should be left column. Closest to you/the top. It runs off the switch. When you are in lights on or the setting right below.
out of all the videos for doing this.. this one, I really like. Thank you
Our pleasure!
So I put it in the INJ fuse in the engine bay and my 4runner would not start. I had to go back to the original 10A red fuse and it worked again. So not sure what to do
It sounds like you don't have a fuse or a blown fuse in the harness thats in the kit possibly. We can figure that out for you and get it taken care of if so! Sales@4runnerlifestyle.com by email will get you connected with our guy Andrew and we can open a case to see what the issue is!
Why does my setup have a fuse on the line? I bought the lower 4 raptor light and the cable came with a fuse connected to it. Plus two fuses for the fuse box… can you please tell me how to set this up? Do I cut out that 15amp fuse out of the main power cable? Or use two 10 amp fuses with the 15amp inline fuse.
Hey! That's strange, The easiest thing is to email sales@4runnerlifestyle.com And we can get that taken care of for you.
Amazing product! This video makes it so easy to install! Recommended 100%
Followed these exact steps and the raptor lights aren’t coming on. Tried changing the ground location and replacing the fuse but nothing…pretty bummed
Hey max! that is not fun! have you emailed our customer support? if you ordered them with us we can help you get them installed or replace them if they aren't working!
Do not use a screwdriver to remove the plastic clips as explained in the video, just push down the button on the center of the clips and pull them up!
For 2020/2021 4Runners plug into the INJ fuse in the engine bay.
i had the low profile fuse they give me the mini fuse tap I can’t put my fuse into a fuse tap so do i have to get the mini fuse to replace the fuse that i had?
how do you put the clips back in?
2021 SR5 and in the INJ fuse of the engine fuse box, the fuse box cover now does not close. Please advise.
@@dlumlung use a dremel tool to create a slot for the wire in the lip of the fuse box. Then match the slot on the cover. Protect wire from chafe with some electrical tape or preferably cloth automotive tape. They should advise using a grommet in the firewall hole also. Grounded sparky wires no bueno.
Wish I would've read this comment before finishing running the cable and crimping the fuse to the line 😫
FYI there is a fuse puller in the engine bay fuse box that will pull out the 4th left fuse
(my fuse box had no empty spaces and no fuse puller I tried worked beside the one that came with the truck)
In this setup, are these lights always on when starting the vehicle up? I was thinking that I'd see a switch for these lights.
I have a 23 limited. Does it fit?
I enjoyed the video and the installation but one hick up I had is the length of the wiring. The wire I received was not long enough to go through the firewall so I needed to make alternate connections. I went ahead and connected the power wire directly into the fuse box, in the INJ slot and it works just the same. Works just the same, easier and faster.
I have a 2020 and my fuse box looks nothing like the one in the video, where should I plug it in?
I have a 2023 40th Anniversary Edition. The fuse box is different than the one in the video, and he doesn't say what the fuse location is labeled. Please help! I would like my lights to work.
The fuse box lid under your hood has a diagram that indicates what the fuses are for.
@RetJetFxr
I understand that. Read my original message. The guy in the video says "plug it in right here." Then he pauses the video and draws a red circle around the spot that he wants you to plug it into. He never states what that fuse spot is labeled. My fuse box is different from the one in the video. I need to know what that fuse location is labeled so I can find it on my fuse diagram...
@@benmorrison6511 I understand. I actually installed these in both my new 4Runner and new Tacoma. In the 4Runner I had to plug the add-a-fuse into one of the two low beam headlight fuses (under the hood), and the tacoma I got a little creative due to the grill style, but I used the INJ fuse so the lights would come on at engine start. In the 4Runner, the INJ fuse sits too high to where there's no room to plug in the add-a-fuse and put the lid back on. In both cases, I still had to cut a notch into the fuse box lid so I wouldn't pinch the wire.
Plastic kept breaking on my 19 4 runner with stock grill didn’t fit like what’s in the video!!
Why do you bypass the fuse box under the hood and use the one in the cab? I seen videos of it done both ways. Is there an advantage to one over the other?
I tried both options for my 18 sr5. Under the hood works for me but after a week my battery died. With this option my lights stayed on every time the truck is on.
I’ve tried connected inside the vehicle under steering column as shown in video but does not work for me.....not sure why.
By hooking the wire under the driver cab does that ensure battery will not be drained? Or should I install a switch?
Inside the cab. The first 10amp will say tail lights. If you use that one. Then you have some control . They wont turn on unless you select your front amber side marker lights. This way if you wanted to . You can run with them off or on with your front side markers. Basically working like a switch
@@flipmode9236 I did this on my 2021 and worked perfectly
@@jeremylusher1316 what fuse spot
did you use? my 2021 under dash fuse box doesn’t look like the one in this video. I only have one empty fuse spot and when I plug it in there, the lights stay on no matter what.
Can i use this exact one for my 2022 model?
And if I want just 3 can I just put 3 and tape the last cable ?
What is that blue piece at 7:32? I bought the raptor lights and they didn’t come with that.
that's your ground connection, if your raptor lights didn't arrive with one feel free to reach out at sales@4runnerlifestyle.com
@@4runnerlifestyle ok thank you
My black wire does not look like this… suggestions?
While wiring the raptor lights on newer 4runners use "tails postion" the raptor with work with parking lights head light high beams but not drls not abig issue
Did u take out the fuse that was in the tails position?
@@houselannister3871 yeah and put the extra fuse in you Engine bay fuse box, they will turn on with parking lights and low beams
Where can I find that bottom black grill?
The pro grill itself here have here: www.4runnerlifestyle.com/products/4runner-trd-pro-grille?_pos=2&_sid=b51938f12&_ss=r
the lower black bumper isnt a part we sell but there are a wide range of them available out there or if youre ok with removing it some people will remove it and have it wrapped or coated black.
How to install on 2021 4runner trd pro?? The fuse box is different on this car vs the 4runner trd pro 2021.
Same here. Only have one empty spot and when I plug it in there they stay on when the car is off.
Where do we connect on a 2024 trd 4Runner outside fuse box?
Im wondering the same thing. My headlights' DRL fuse tap seems to be the only fuse that I can plug into that actually turns the lights on and off with the car. The other fuse locations just keep the raptor lights on even when the 4Runner is off. I can do what he did in the video but then my fuse box's cover wont be able to go back on with that big fuse tap coming out of it. Lol talk about rough day
thank you - followed your directions.
Anyone trying to figure out which fuse spot to insert the raptor lights at in the 2024 Runner?
can't get my lights to come on, my fuse box is pretty full. my fusees are a little different order. Are you plugging into a blank fuse panel?
Yes, that can happen, we are going to an open position or at least one that doesnt already have an add a fuse. A way to fix this issue is with a control panel like an SPOD or an Auxbeam. They help organize all the wiring and make it more streamlined when adding so many lights
www.4runnerlifestyle.com/products/auxbeam-8-gang-led-switch-panel-kit-one-sided?_pos=4&_sid=cf76e6711&_ss=r
I did it just like on the video but I couldn't connect with the headlights?? can someone help
So I didn’t go through the firewall, instead went directly into the fuse box under the hood. I’ve found two configurations. One will turn the raptor lights on only when the headlights are on. The second configuration will turn the raptor lights on whenever the engine starts. Looks like the configuration in this video turns them on with the headlights too… I think I like having them on without the headlights as an option- just thought I’d throw out that thought if anyone is interested
What fuse did you use for on without the headlights?
Got a question here, do they really add usable light or they are just for the cool look? Any idea of the lumens?
They are just marking lights. They don’t throw enough light to add any forward visibility
Hello guys
I don't have any free spots for 10A fuse install....
Any suggestions what's to do.
I have 2022 4 runner limited
!!!This is very important and should be checked in your state prior to purchase!!!
It is illegal to have the off road raptor lights turned on while driving on state roads especially with the LED white modifications. I just got pulled over in PA(worst state ever) and he said they must be turned off when you're driving on the road unless they're manufacturer installed.
I live in PA (outside of Philly) and never knew this. Do you have an actual reference from the PA DOT or DMV? I have amber raptor lights in both my 4Runner and Tacoma grills.
Is there a way to wire directly into the fuse box or use a positap so you don’t have to have that fuse splitter thing?
Beautiful work.
I have a 2020 trd pro 4runner and my fuse box doesn’t have the same configuration. Where do I plug in the add a fuse??
@ Ryan Peck, did you find out the answer to your question?
I’m still trying to find the answer. No info yet on you tube?
Did anyone find an answer for the 2020 TRD pro?
I have not. There is a guy on you tube with his white 2020 Pro with raptor lights. He has not posted the video yet how to hook them up. His name is Chris.
Plug it into the big fuse box in the engine compartment. Look for the fuse marked 10A INJ
Anything similar for Fj cruiser?
Does anyone know of an install video that shows me how to do it if I want the option of turning the lights on and off?
You would need to link it to the cabbing with cables OR use search for a led switch with on and off remote. Like those rgb ones.
Just cut the positive line and put an togle switch for on and off.
@@BENHAWAIIVLOG better to do it on the ground side.
Would this fit the 2012 model?
Putting it in the TAIL position. DRL no longer works and my lights don’t turn off automatically when locking truck.
I just bought a 2020 4runner but the front grid where this lights fits is not the same as the shown in the video. Is there other models for different grids??
Same! My 19 isn’t fitting right looks like shit
Good video! Just ordered the set of 3
Would be nice if they updated the instructions for newer 4Runners. The harness they provided doesn’t just fit into the INJ slot like the updated “instructions” do below.
John we recommend for any newer 4Runner to put our add a fuse into the tail position of the interior fuse box, or KDSS position.
@@4runnerlifestyle can you make a video on this?
@@justinwiley4261 As soon as we can get a hold of a new 4Runner yes
@4Runner Lifestyle
Happy to bring my 2021 to use in an updated video. I have purchased the lights but can’t get them to work correctly. The tail location did not work for me.
@@4runnerlifestyle looking for guidance on where to install the add-a-fuse for 22 4runner Off Road as the lights stay on all the time. Thanks
Ordered these Friday via the website, however have not received anything confirming my purchase has been received. Emailed and texted per the website, no response. My card has definitely been charged. Little concerned..
Side B Productions LLC Have you heard anything back from them since you posted the comment?
Admiral Tacos yes received and installed very happy with them! Clearly a newer business so communication is a bit slow.
Side B Productions LLC Awesome thanks for the reply! I had just ordered from them last night and then read your comment so I was worried haha. Couldn’t find anything about them online either so I assumed they were fairly new.
@@AdmiralTacos Did you receive your products? How long did it take?
Anyway to hook them up only when the lights are on auto or full on? Then when lights are in the off position they are off as well. Thank you.
Just clip them to the head lights cables. That's what I'm planning to do on my Ranger.
You should do an install video on the 3 light kit, as the wire provided is not long enough to get through the fire wall and you have to use the fuse box in the engine bay. I had to follow instructions on the R4T install and shorted something because my 4Runner wouldn’t come out of park and my ABS, battery and traction control lights all came on. All the fuses I checked seemed ok and driving home everything freaked out and shut off. Currently waiting on a tow truck. No fun.
Yo that happened to me too when I originally installed in the under the hood fuse box. It just completely shut off and brakes didn’t work or anything on the highway. Luckily it wasn’t rush hour and I had to push the brake hard as I can to slow down a little till I rolled to a stop. I had it towed to the dealership and they said it was the fuse that was put in was not good on these aftermarket parts. I bought the 4 lights and wired it in the cabin drivers side fuse box and I’ve had no problems since in the cabin you use a slot that didn’t have an existing fuse already. Other instal videos said take the inj fuse and put it into the add a fuse they provide under the hood which is what made things mess up.
What amperage is that red fuse
10, Make sure its in the tail fuse position (top left)
Why is there some grills with 4??
It depends on the Toyota emblem that you have on your front grill. Some have the letters like the one in the video, others have the round Toyota emblem in the middle of the grill.
Without a rubber grommet in the hole through the medal you have a potential disastrous fire with wire rubbing on medal. Especially if you drive a lot of rough roads. Not just speculation, I know one that was totaled, wired without that rubber. If you put one in sorry, I didn't see it.
I have the 2021 4Runner TRD Off-Road Premium w/ KDSS. There are only 3 open circuit breaker slots open and only one of them fits the wire that comes from 4Runner Lifestyle. That specific breaker opening works but does not power down when I turn off my accessories, turn off lights, lock my doors, etc ... The Raptor Lights stay on. Any guidance or support would be greatly appreciated.
For the newer 4runners you have to put the add a fuse in the tail position of the fuse box.
Thanks
hi! where can i buy that roof rack? do you sell one? ..what is the the brand?
The positive wire connection you did not mentioned the connector ...
Love your page. Do you know if it’s possible to find a fake hood scoop I can put on my 4Runner sr5 since it didn’t come with one?
The only way we know of is to find one off a lot or from another 4runner that is either the same color or have it paint matched.
We so sell carbon fiber hoods that have the scoop as well www.4runnerlifestyle.com/products/seibon-4runner-carbon-fiber-tr-style-hood-2010-2021?_pos=4&_sid=e22d38b71&_ss=r
I had my connected n the front fuse box and I cant find the DRL fuse
Did this drain your battery?
Nope....i just hatevtye fact it on all the time when car start and I can't just use when ever I want
Do you have a set for a 2019 TRD Pro Tacoma?
But why would you put FORD style 'Raptor' lights on a Toyota? You do know that the Raptor was required to have those due to the width of the vehicle, right? Right?
I will say, those lights are very well built in their fitment.
I saw some install videos where the wiring was connected to the fuse box located in the engine bay. Is there a difference between installing in the engine bay and installing in the driver side fusebox?
What roof rack do you have?
I'm in Canada. Is it available to purchase the stuff for my 4Runner?
Install appeared to go smoothly, but lights will not turn on. Tried different fuse locations in the cabin, re-checked connections, but nothing. Awaiting return communication from 4Runner Lifestyle.
Just did the install, same with me. Did you get it figured out? Thanks in advance.
New to the 4 runner game. I have the trd off road premium grille with the Yota badge would I need to swap grilles?
How to install in 2021 4runner trd pro?? Way different
So I just installed mine I ordered during Black Friday and nothing. I followed the video exactly. What should I do?
Get a test light and check where you are getting your power from.
How would you install these different if you want them to come on with your headlight amber lights or foglights?
I'm interested in knowing the same.
Which fuse should be used to get the lights to turn on with headlights?
Just installed mine. Looks nice and all, but the lights don’t turn off. Any issue with that?
Did you ever figure out how to turn them off I have the same problem right now?
How do i ad it so they will come on with DRL?
PSA to everyone this is not the way to do it on 2020+. You have to use the fuse box under the hood
What slot do you use in the fuse box under the hood? I have a 2020 4Runner TRD Pro.
No you don’t. You can pull the fuse labeled “IGN” in the panel under dashboard and use the add a fuse in that spot with the 10amp fuse you pulled out and a 15amp fuse for the lights and you are good to go. Could probably work in the spot labeled “IGN NO.2” as well.
@@ryanlieder7459 thank you for this I was struggling to get them to turn off when the car was off but this definitely worked without having to use the fuse box under the hood.
@@ryanlieder7459 Just want to say thank you my man. I just installed these into my 2021 trd pro based off this comment. Ryan does not lie works in either.
@@ryanlieder7459 bro THANK YOU SO MUCH. I was about to just give up because my 2021 ORP fuse box under the steering wheel is NOT the same as this video. And if you put it in the only available slot the lights stay on all the time. So thank you so much for this tip!!! Also, do you lose anything by taking out the old fuse and putting in this one?
I have a 2018 runner sr5 my lights didn’t turn on help not sure what I’m doing wrong
check your power or ground connection.
vince j , I connected the fuse to the relay and fuse box in the engine bay with black ground wire connected to a bolt holding battery and it works. (Battery died after a week, not sure why). Tried connected to inside fuse box under steering Column as shown in video with the black ground wire and did not work....
@@honestgal9098 if you try to remove the light to see if your battery die again. IF DIE without the light then some thing else causing the drain not the light itself or vice versa
Mine came with another inline fuse. Couldn’t figure out how to get that fit through the hole under the hood.
I’m In The same boat. Do we need that inline fuse?
And what did you do to make it work?
Can someone tell me if they turn off when you turn the headlights off or do they turn off if the brights are on or is it if the car is on they are on
It depends on what fuse you put the ad-a fuse in. But if you use the fuse provide they will be on when the car turns on.
@@4runnerlifestyle the lights (raptor) stay on after the car is off.
@@gsdlvr123 yes depending on where you put the ad-a-fuse will change how those lights receive/ interact with the power distributed
@@4runnerlifestyle we put it where the video says. We had to change it but now can’t find a spot where they will be on without the lights.
@@gsdlvr123 If that's the case you need to but the ad a fuse in the most back position.
Do these clip-in style lights work (clip-in) on the OEM upgrade grill? I have a 2017 SR5 and want to upgrade my grill ty o have the lights but i don't want to spend $600 for a grill upgrade to then find out that these lights won't fit. Anyone know?
Should fit the SR5 grille just fine. But only on top. The bottom grille holes are bigger.
Whats the blue thing called
cool lights but how to turn it off during day time?
Use a different fuse selection
I used the 10a."tail" on the in cab fuse box. Because I didn't want them on during the day
Off topic question. What roof rack is that?
Gobi Stealth
I didn't like where the harness was installed. Instead I installed it on the fog light circuit so that they lights would turn on and off with the fog light switch, controlled by the fog light relay and protected by the Fog FR fuse.
on this install will the raptor lights work without having to put the DRL lights on?
If you put the ad-a fuse in the correct position the raptor lights will turn on and off with the car organically no switches or light toggling needed.
does the black wire is the ground or negative? trying to figure this with a switch and a relay. Are there any videos with the same lights installed it with a switch and a relay?
We don't have another video showing this but the black wire is indeed a negative.
So do we just leave the hole in the firewall unplugged? Cant plug in the grommet with the wire there.
what i've done in the past on other vehicles is i remove the grommet and drill a small hole through (slightly smaller then the wire diameter to make it a tight fit), then pass the wire through the grommet and leave the grommet sitting in the middle of the wire. then when the wire is done being fished through the firewall i simply slide the grommet back into position and pop it back in. easy way to seal it back up.
Do I need to disconnect car battery for this??
I have a 2018 limited model...can I do this still or no? I looked from in the hood and don’t have the same hole and inside the fuse box is covered
I have a ‘21 TRD Venture, I’m installing the lights on the bottom section of my grill and the lights don’t clip on. Any advice on how to fasten them?
Also, my lights stay on constantly. Please advice!
@@raularisty3077 I had to buy bottom light kit. It comes with a backing and have to screw them together to stay in place
Does this kit come with everything I need to install these lights AND operate them off of a switch installed on the dash to manually control then?
Interior Fuse locations are completely different on a 2020+ 4runner. Will need to utilize another fuse placement for these years, FYI.
Yes...2018 is different as well
Which one?
@@andrewcuevas5906 th-cam.com/video/hhWkvaJfcL0/w-d-xo.html this one explains what location :-)
I have a 2020 and I don't have an empty slot where should I plug it in?
I’m in the same situation what did you guys do
Do you know if they will void warranty at all?
They do not void any factory warranties
My raptor lights only work when my lights are in day time running mode when they are on full it does not work
I cant get the wiring into the cabin, i cant even get the wiring an inch into that hole
Where do you plug it in on a 2020 Toyota 4Runner fuse box? It is totally different.
100%
Ya you don’t need a flat head screw driver to pry off those plastic pieces in the beginning. It’s just a button you need to push. I broke 2 of em trying to pry them out with a flat head like you said
Bought these for my 2021 4Runner SR5 Premium and they don’t snap into place on the grill. The body of the 2020 and the 2021 didn’t change. Disappointed.
They fit perfectly into mine. I know it seems silly, but try flipping the lights upside down from the way you had it initially. They're identical, I know, but this worked for me.