BBC Cellpack CAE 3I Montagevideo
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Sehen Sie in knapp 12 Minuten unser neues Montagevideo einer CAE3!
Nach dem ersten Montagevideo der 3-Leiter-Verbindungsmuffe CAM3 mit Gießharz-Außenschutz folgt nun eine ausführliche Montage eines 3-Leiter-Innenraumendverschlusses CAE3l 17kV 500 mm2.
Jeder Montageschritt wird in diesem Video ausführlichst und detailliert erläutert.
Gefällt Ihnen unser neues Video? Liken, Teilen und Kommentieren Sie es! Wir freuen uns über Ihr Feedback.
Dieses Montagevideo ersetzt keine Montageschulungen, Installationsanweisungen oder entsprechende Sicherheitsvorschriften.
_____________
Watch our new assembly video of a CAE3 in just under 12 minutes!
After the first assembly video of the 3-core straight through joint CAM3 with cast resin external protection, follows a detailed assembly of a 3-core termination for indoor CAE3l 17kV 500 mm2.
Each assembly step is explained in detail in this video.
Do you like our new video? Like, share and comment it! We are looking forward to your feedback.
This video does not replace any practical or theoretical training, installation instructions or corresponding safety regulations.
Respekt, so viele Arbeitsschritte alles im Kopf, Sie üben diese Tätigkeit schon lange aus.
Hi @elektrotechnikbasis123,
ja das stimmt, das tun wir tatsächlich :) Übung macht den Meister.
Aber ganz ohne Montageanleitung montieren wir auch nicht, wir überlassen nichts dem Zufall.
Beste Grüße
BBC Cellpack Electrical Products
Sir, I just didn't understand why you left two copper hairs in each wire, please explain to me and thank you
Dear Nasro,
very well observed and analyzed.
The black tubing below the termination has no anti tracking properties and is just protecting and sealing the breakout fingers and tail lengths. Below the termination a definite ground potential is needed to guide possible surface currents to ground.
Best regards
BBC Cellpack Electrical Products
...nur spannt, legt man ein Kabel nicht unbedingt als Fixierung in einen Schraubstock!
Guten Morgen Thomas,
das ist richtig :) Unsere Videos sollen unseren Kunden als zusätzliche Montagehilfe dienen. Die Praxis im Kabelgraben sieht natürlich anders aus. Aber durch unsere Videos hoffen wir, allfällige Fragen schon vorab klären zu können, einzelne Montageschritte bereits detailliert aufzuzeigen und so die Installation im Graben ein wenig zu erleichtern. Danke für dein Feedback!
Beste Grüße
BBC Cellpack Electrical Products
Good job
عمل رائع
و منكم نستفيد أخي
Thank you!
Mooie werk, Bedankt
Your welcome!
Very nice 👌👌👌👌
Super...
⭐⭐⭐
Good
Thank you, Farooq!
o cara e bom
nice ❤❤❤❤
Thank you, Saiful!
May wish it cellpack company give a t shirt 👕 in the joint
Dear Liaquat,
I did not understand your request. How can i help you?
Best regards
BBC Cellpack Electrical Products
Excellent
Absolutely!
Why do i always see torches used for the shrinkwrap. Wouldn't a heatgun be more controllable with regards to scorching and temperature in general?
Hello Leslie,
both tools (torches and heat gun) are suitable for use on heat shrinking tubes. But torches in particular contribute more energy than heat guns. The tubes themselves are designed to withstand certain temperatures when used correctly. It is important to move always around the tube, so that a evenly distributed wall thickness will be achieved without surface burnings.
I hope I could answer your question.
Best regards
BBC Cellpack Electrical Products
Very nice job Malaysia
Thanks a lot for your Feedback!
Best
Thank you, Deddy!
Nice
Thank you!
Great
Thank you!
What is the name of the tool used in 07:53?
Hi,
the manufacturer is Cembre.
Find the product here: www.cembre.de/product/details/39725
Hope this helps.
Best regards
BBC Cellpack Electrical Products
Thank you @@BBCCellpack
i need the file which in the end of the video?
Hi Ragap,
sure!
Just send an email and we will take care of your request: ep.techsupport@cellpack.com.
Thank you! :)
Best regards
BBC Cellpack Electrical Products
Nice job...
⭐⭐⭐