Is it the best solution to buy Lyngdorf speakers if you have a Lyngdorf amplifier, I plan to buy a tdai1120 and I like the fr1 speakers because they don't need a subwoofer?
The advantage of combining Lyngdorf amplifiers with Lyngdorf speakers is that you’ll find presets in the setup menu for all Lyngdorf speakers. For example you can select the FR-2 and then do RoomPerfect. The FR-2 works very well without subwoofers, as the low frequencies are tuned to use the wall to their acoustic benefit. But if you want to add a woofer later, for example in a larger room, you can select and add a Lyngdorf BW woofer in the setup menu, and the ideal crossover and alignment will already be set.
Technically, the TDAI-1120 and TDAI-3400 can be looped-in (analog, or even digitally with the TDAI-3400) as a RoomPerfect processor only, by disabling the amplifier outputs and bypassing the volume control. But as a pure processor, the RP-1 can be found pre-owned. It is the same RoomPerfect technology, however only via analog-in / analog out, and without the convenience of today’s app control.
RoomPerfect is exceptionally good in aligning subwoofer with the main speakers. In our TDAI amps, you can set the pre-out for two custom subwoofers, for example placed left and right, and define the best crossover frequency for your main speakers. Then RoomPerfect will make frequency-individual alignment and make speakers and woofers play together “as one”.
@@SteinLyng Thank you for your reply, my other question is around the "listening position" once the room is measured, is it a wide or narrow listening spot to get the best results from the corrections?
@@adammusic1124 Both! There is a so-called Focus listening setting, and a so-called Global setting, for example when more people are listening. But thanks to the multiple mic measurements across the room, even the Focus spot is not too narrow in its correction.
That's true and that's what Amar G Bose told us and it's engineers"use your ears to tell the difference and today Steinway Lyngdorf tell us "trust your ears".Well said Dr.Amar G Bose.
@@wjet2956 When you have capable loudspeakers, that can happen, and you can feel it. However, the TDAI-1120 is a digital amplifier, therefore air soundwaves and mechanical resonance have no audible impact on the digital components inside or on the digital signal path.
@@SteinLyng thanks，Hoping to enhance the shockproof performance of the shell，products such as digital amplifier still need good shockproof performance.
Hello Francis. The KRK Ergo was developed together in cooperation with Lyngdorf and using our RoomPerfect technology and, made for studio desktop monitor applications. An external computer was needed to control it, only analog outputs for AB monitor speakers, and studio connector types.
@@SteinLyng Yes I have it. You mentioned in your other videos that you had to re examine room perfect and rebuild it from the ground up. Is the technology you created with KRK outdated?
@@thestonesteels You can happily continue with your KRK! Anything that bears the name RoomPerfect is the original advanced technology. The Lyngdorf engineers re-examined electronic room correction in general, and the outcome was RoomPerfect.
Awesome video👍 Great explanation.
Thanks! We are glad you like it.
Is it the best solution to buy Lyngdorf speakers if you have a Lyngdorf amplifier, I plan to buy a tdai1120 and I like the fr1 speakers because they don't need a subwoofer?
The advantage of combining Lyngdorf amplifiers with Lyngdorf speakers is that you’ll find presets in the setup menu for all Lyngdorf speakers. For example you can select the FR-2 and then do RoomPerfect. The FR-2 works very well without subwoofers, as the low frequencies are tuned to use the wall to their acoustic benefit. But if you want to add a woofer later, for example in a larger room, you can select and add a Lyngdorf BW woofer in the setup menu, and the ideal crossover and alignment will already be set.
If I want room correction only because I already have preamp and poweramp, then the device would be the RP-1?
Technically, the TDAI-1120 and TDAI-3400 can be looped-in (analog, or even digitally with the TDAI-3400) as a RoomPerfect processor only, by disabling the amplifier outputs and bypassing the volume control.
But as a pure processor, the RP-1 can be found pre-owned. It is the same RoomPerfect technology, however only via analog-in / analog out, and without the convenience of today’s app control.
Can it work on dual subwoofers? Say 2 REL subwoofers for example?
RoomPerfect is exceptionally good in aligning subwoofer with the main speakers. In our TDAI amps, you can set the pre-out for two custom subwoofers, for example placed left and right, and define the best crossover frequency for your main speakers. Then RoomPerfect will make frequency-individual alignment and make speakers and woofers play together “as one”.
@@SteinLyng Thank you for your reply, my other question is around the "listening position" once the room is measured, is it a wide or narrow listening spot to get the best results from the corrections?
@@adammusic1124 Both! There is a so-called Focus listening setting, and a so-called Global setting, for example when more people are listening. But thanks to the multiple mic measurements across the room, even the Focus spot is not too narrow in its correction.
That's true and that's what Amar G Bose told us and it's engineers"use your ears to tell the difference and today Steinway Lyngdorf tell us "trust your ears".Well said Dr.Amar G Bose.
买了TDAI-1120，效果真的很满意，使用同样的音箱，room perfect比之前用的Dirac live的校正效果明显要好一个档次，特别是在低频方面差别较明显。
Many thanks for the good feedback.
@@SteinLyng 对了，给你们反映一个我在使用中发现的问题，音箱发出低频声音的时候，手放在1120的外壳顶部，能感受到明显的共振。
@@wjet2956 When you have capable loudspeakers, that can happen, and you can feel it. However, the TDAI-1120 is a digital amplifier, therefore air soundwaves and mechanical resonance have no audible impact on the digital components inside or on the digital signal path.
@@SteinLyng thanks，Hoping to enhance the shockproof performance of the shell，products such as digital amplifier still need good shockproof performance.
Moved from Dyna Audio?
Why ?
@@pironi2405 How should I know why this guy change company?
Good morning.
Is the KRK Ergo Roomperfect technology = linear technology?
Hello Francis. The KRK Ergo was developed together in cooperation with Lyngdorf and using our RoomPerfect technology and, made for studio desktop monitor applications. An external computer was needed to control it, only analog outputs for AB monitor speakers, and studio connector types.
@@SteinLyng Yes I have it. You mentioned in your other videos that you had to re examine room perfect and rebuild it from the ground up. Is the technology you created with KRK outdated?
@@thestonesteels You can happily continue with your KRK! Anything that bears the name RoomPerfect is the original advanced technology. The Lyngdorf engineers re-examined electronic room correction in general, and the outcome was RoomPerfect.