Sony,my eng not good. I am use to backup Firmware，because not official firmware in Internet. I don't know choose is what file to backup. and that i think backup all but datauser. so i will backup pgpt to cache, otp to sgpt , i need repeat doing export twice?
Thanks hovatek. I have a simple question. wwr mtk tool says my device has hardware mt6762, platform mt6765. Since the mt6762 chipset is not in the list, is it ok to select mt6765? Thank you
so I failed on k41s mtk6765 0x00 0x8000 android 10, readback grip, i did everything,, and,,put in dawnload mode, recovery, brown, not low the boot1 emmc
Hi, I have a lenovo tablet tb-x6c6l. I downloade the stock firmware but when I extract it. I didn't see the pgpt. Can you see if you can find me a firmware that has the pgpt file for my tb-x6c6l ?
I used this method to dump a 8168B (AND THANK YOUUU) but with this MT8768 on SP v5.22 when i use scatter file created on wwr (2.51) get mt87 not supported tells me to update but on SP v6 no box for scatter file only download-XML and auth file boxes.....what do i do with the scatter created on wwr?? THank you
is it possible to contact you some other way than youtube comment section? i have doogee n20 pro (mt6771), following your tutorial i have had issues creating full dump, created scatter file in wwr gave me "mismatch error" so i have used scatter extracted from downloaded rom - anyway i can not see system partition and userdata partition is 14GB... can you help me with that?
Thanks Hovatek! One question: my full ROM dump seemed successful except for the message that the userdata was encrypted. When I try to restore the full dump using SP Flash, it looks like it runs successfully but then gives me an error "your password was correct but your data is corrupt" followed by a factory reset prompt. What did I do wrong with the WWR ROM creation process?
hello Sir. I use micromax Q372 handset MTK6582 chipset. while flashing with spft I selected "format+donload" option instead of "download" an d since then my phone is dead. it just charges and get flashed without any error. but doesn't turn on. will this procedure help me in partitioning my emmc chip.
Good day bro, I appreciate your work.. Please having a torrid time here. Sp flash tool doesn't support mt67.. What do I do please? My chipset is mt6769 and it wasn't listed so I had to add it... I've checked the forum for your solutions but it kinda didn't work for me
I have dead redmi 9a and am trying to read back since flashing with downloaded firmware gives me an error. so following the video tutorial i saw a certain comment for us to use chipset mtk6765 since mine is mt6762. but when i try to read back after modifying EMMC BOOT1 i get "invalid preloader error".... and i have tried changing sp flash tool to advanced mode , changing preloader to upper letters a directed rom one of your suggestions .... please help
brother, it gives an error when connecting the phone error brom and I restart to bootloader, lg poenix 5 android 10 mt 6765, 6762 probe with both 6762 says k we are compatible.
Cant read back prelosder file on MT 6765 CPU. Error: Status preloader invalid (0xc0030004) the preloader file formate is invalid (hint) please retry another official load
Sorry but are you leaving out the rest of the system? So it's not a complete dump. To have the exact copy of the device you will have to copy all the partitions. And how do you do? What is the final value to use? congratulations, thanks to you or made my first copy without root or twrp you are great Thank you😁
Please help I'm on 3. Start autopilot After i start the process Informarion ℹ️ You must select a file containing the preloader. For example, the read memory dump in the SP Flash Tool, then select EMMC_BOOT1 REGION.
Good work Howatech but brother how can we unbreak sign boot devices with dum backup as you know all new mtk fones are sign boot now i creat back as you teach but my fone gose dead after flash Mobicel R 1plus its a sign boot fone so shere any idea how can unbreak sign boot device
ERROR: Storage type mismatch! scatter: HW_STORAGE_EMMC device: HW_STORAGE_UFS I have edited the scatter file's storage parameter to read "HW_STORAGE_UFS"; but still it is giving the same error. So, it looks like it is getting this information somewhere other than the "storage" parameter in the scatter file.
Hello man, Time 9:50 loading PGPT doesn't work with me! when I selected the PGPT file WWR v2.51 doesn't show Table of sections, it direct show preloader menu! where is the mistake plz?
@@HovatekTV Merci! I have a Meizu M5 CHN version, I hope to re-flash as international. Your special way let me rooted it, how ever, I hope I can get one cleaned firmware without any Chinese app or tracking inside. That’s why I hope to do, and asked you.
hallo master , please help me🥹🥹..help me to get boot.img file from tecno spark 20 pro+ device. Can this video method be used to get the boot.img file for root? pleae replay this master please.. i need u help😭
Very precise! I am going to try this! Hovatek is the MTK KING
Thank you so much for the tutorial, just a question, will the backup work on a different identical phone? Or just on the same device?
It'll work on different phones of the same model
Very honest and hard worker sir. It helped me back my phone and later downgrade if required..
Sony,my eng not good. I am use to backup Firmware，because not official firmware in Internet.
I don't know choose is what file to backup. and that i think backup all but datauser.
so i will backup pgpt to cache, otp to sgpt , i need repeat doing export twice?
Thank you for the instruction. I did back up the stock rom.
THANKYOU HOVATEK YOURE SO GENEROUS
no he aint bc he FORCES you to sign up for his site. Why? Probably data collection.
Thanks hovatek. I have a simple question. wwr mtk tool says my device has hardware mt6762, platform mt6765. Since the mt6762 chipset is not in the list, is it ok to select mt6765? Thank you
Try add MT6762 in the tool if choosing MT6765 doesn't work
@@mikeStargazer57 Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
@@HovatekTV thanks. Solved
@@mikeStargazer57 mt6765 and mt6762 are same hardware so use mt6765
@@HovatekTV Great. Thanks
Great video.
For me to do the full backup, do I copy the number referring to the full volume of GPT, insert it in length , start as 0x0 ?
yes
Thanks you, I have backed up my f2
thanks a lot hovatek. its working.
Your channel is very helpful...sir
thank mate, i backed up my phone vsmart active 3 mt6771
so I failed on k41s mtk6765 0x00 0x8000 android 10, readback grip, i did everything,, and,,put in dawnload mode, recovery, brown, not low the boot1 emmc
No idea what you're talking about
Hi, I have a lenovo tablet tb-x6c6l. I downloade the stock firmware but when I extract it. I didn't see the pgpt. Can you see if you can find me a firmware that has the pgpt file for my tb-x6c6l ?
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
I used this method to dump a 8168B (AND THANK YOUUU) but with this MT8768 on SP v5.22 when i use scatter file created on wwr (2.51) get mt87 not supported tells me to update but on SP v6 no box for scatter file only download-XML and auth file boxes.....what do i do with the scatter created on wwr??
THank you
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
is it possible to contact you some other way than youtube comment section? i have doogee n20 pro (mt6771), following your tutorial i have had issues creating full dump, created scatter file in wwr gave me "mismatch error" so i have used scatter extracted from downloaded rom - anyway i can not see system partition and userdata partition is 14GB... can you help me with that?
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
I followed your way to backup the nvram and nvdata . But the nvdata and nvram I get is not in nvdata.img and nvran.bin format. What should I do?
There's nothing wrong with this
Thanks Hovatek! One question: my full ROM dump seemed successful except for the message that the userdata was encrypted. When I try to restore the full dump using SP Flash, it looks like it runs successfully but then gives me an error "your password was correct but your data is corrupt" followed by a factory reset prompt. What did I do wrong with the WWR ROM creation process?
Nothing is wrong with the wwr process. Userdata is encrypted for your model hence dumping userdata before its disabled causes such
@@HovatekTV , thank you. Is it possible to decrypt the userdata prior to dumping it with wwr without rooting the device? The model is a TB-8505FS.
@@charleskanavel9864 Yes,, its possible. Go to forum.hovatek.com and click Ask Question at the top. Request this and post.
Is it possible to extract data user from a moto g3 locked?
hello Sir. I use micromax Q372 handset MTK6582 chipset. while flashing with spft I selected "format+donload" option instead of "download" an d since then my phone is dead. it just charges and get flashed without any error. but doesn't turn on. will this procedure help me in partitioning my emmc chip.
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
Good day bro, I appreciate your work..
Please having a torrid time here.
Sp flash tool doesn't support mt67..
What do I do please? My chipset is mt6769 and it wasn't listed so I had to add it... I've checked the forum for your solutions but it kinda didn't work for me
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
This is great, but it wipes the imei number, which tool do I use to fix that problem?
It's ok, I found the tool... thanks again.
backing up doesn't wipe anything
@@HovatekTV I see, so it was missing already..a mistake I made no doubt.. thanks
Thank you very much!!!
Eres un el Mayor de todos los AMOS
I have dead redmi 9a and am trying to read back since flashing with downloaded firmware gives me an error. so following the video tutorial i saw a certain comment for us to use chipset mtk6765 since mine is mt6762. but when i try to read back after modifying EMMC BOOT1 i get "invalid preloader error".... and i have tried changing sp flash tool to advanced mode , changing preloader to upper letters a directed rom one of your suggestions .... please help
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
brother, it gives an error when connecting the phone error brom and I restart to bootloader, lg poenix 5 android 10 mt 6765, 6762 probe with both 6762 says k we are compatible.
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post
does it work on Android 9?
i have oppo A1k
System
Cache
Userdata
Nahi aa raha hai kyo flashing ho jayega please help me
Can you help me find stock firmware for LG X4 2019? I bricked my device by downgrading using LG UP
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
Cant read back prelosder file on MT 6765 CPU.
Error: Status preloader invalid (0xc0030004) the preloader file formate is invalid (hint) please retry another official load
you need to load preloader from the firmware to perform any operation
Sorry but are you leaving out the rest of the system? So it's not a complete dump. To have the exact copy of the device you will have to copy all the partitions. And how do you do? What is the final value to use?
congratulations, thanks to you or made my first copy without root or twrp
you are great
Thank you😁
large partitions were left out because this was a demo
Please help I'm on 3. Start autopilot
After i start the process
Informarion
ℹ️ You must select a file containing the preloader.
For example, the read memory dump in the SP Flash Tool, then select EMMC_BOOT1 REGION.
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
when 1 try to readback preloader, i got an error:
ERROR STATUS_PRELOADER_INVALID (0xC0030004)
The Preloader file format is invalid !
check forum.hovatek.com/thread-439.html
brom error s_dl_get_dram_setting_fail (5054) please help
search for 5054 @ forum.hovatek.com/thread-439.html
Thank you team
Good work Howatech but brother how can we unbreak sign boot devices with dum backup as you know all new mtk fones are sign boot now i creat back as you teach but my fone gose dead after flash
Mobicel R 1plus its a sign boot fone so shere any idea how can unbreak sign boot device
Some backups work when you flash other files except preloader
Unlock bootloader is necessary for backup or not
Not necessary
ERROR:
Storage type mismatch!
scatter: HW_STORAGE_EMMC
device: HW_STORAGE_UFS
I have edited the scatter file's storage parameter to read "HW_STORAGE_UFS"; but still it is giving the same error. So, it looks like it is getting this information somewhere other than the "storage" parameter in the scatter file.
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
Hello man,
Time 9:50 loading PGPT doesn't work with me! when I selected the PGPT file WWR v2.51 doesn't show Table of sections, it direct show preloader menu! where is the mistake plz?
i think you didnt do EMMC_USER i think you left it EMMC_BOOT
@@abdelmalksmaik7193 Thanks. Could any one upload template.ini that includes MT6572A for me plz?
HI hovatek, are the other data not important below system
In most cases they're not but back them up if you need them
Is this tool can modify the final firmware to remove some services and apps bounded?
No
@@HovatekTV Merci! I have a Meizu M5 CHN version, I hope to re-flash as international. Your special way let me rooted it, how ever, I hope I can get one cleaned firmware without any Chinese app or tracking inside. That’s why I hope to do, and asked you.
@@user-et1pz7po2bxgfdseqazxse7e2 Go to forum.hovatek.com and click Ask Question at the top. Request this and post.
helpful information
Hi, How do I do a full rom dump without skipping anything
Sorry I rewatched the video and found out
doesn't work on oppo A1k with mt6762
device always power on to charge whenever i plug it to PC
try plug it with pressing volume up or down or both
or try removing batterry and pplug it if battery can be removed
@@abdelmalksmaik7193 non removable 4000mah battery
also didn't work
it's driver(scatter) issue i suspect
Thanks, I have made a backup
Thanks mahn! Finally I can root tecno f1
Don't forget to subscribe and share
Cannot populate this section ( table of sections still empty) !!!?
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
Hey Wwr does not allow me to Select all partitions please help me Edit: *I FIXED IT*
Make video on acer one 8 tablet full rom dump android 13 2024 model
Pls can u give us the script tortural using exactly this wwr version because not everyone can watch the video till the end
link is in the description
Sir I have memory type ufs2.1 what I do sir pls reply
WWR 2.51 doesn't support UFS
how to remove tee key google for umidigi a13 pro max 5g ?
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
thank you sir
can i use the boot.img on my device or in magisk ?
yes
how to use wwr mtk to flashing samsung a10s dead boot
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
Status preloader invalid How to fix the error
Load a preloader file for your model
if backup user data i can recovery photo and music or no
If userdata is encrypted, no
@@HovatekTV how can save data
@@haroun299 Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
Will MTK DTV53xx supported(TV)
that's for you to test
@@HovatekTV any hints like can a tv enter preload/brom mode?
You'll have to try
Why when i make it, it become 100gb but from google its just 5gb
That's because you're dumping userdata
@@HovatekTV but i just do factory reset tho
@@idkbroidkidk9555 It dumps the entire partition even though its empty space
@@HovatekTV so, is there a way to reduce size?
@@HovatekTV i just want pgpt file
Please add how to install nck pro dongle setup
see forum.hovatek.com/thread-22354.html
error s brom download da fail (2004)
help
See forum.hovatek.com/thread-439.html
@@HovatekTV thanks
If have a do same process its make a full rom dump file
Does it format phone?????
No
hallo master , please help me🥹🥹..help me to get boot.img file from tecno spark 20 pro+ device. Can this video method be used to get the boot.img file for root?
pleae replay this master please.. i need u help😭
Follow this guide www.hovatek.com/forum/thread-46342.html
@@HovatekTV spflash tool. not support MT6789 🥹🥹. can u help me sir, 😭
@@skill_Mantuelit Please visit www.hovatek.com/forum and click Ask Question at the top. Type your question/request and submit.
Best 💓 team
attention empty or spoiled rom on emmc user file
@@HovatekTV any idea why my phone still readbacks after formatting?
@@koyoriin7317 of course it would. You'll just get mostly empty partitions
B b80
Please go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.